International Journal of Production Economics
1991 - 2025
Continuation of Engineering Costs and Production Economics. Current editor(s): Stefan Minner From Elsevier Bibliographic data for series maintained by Catherine Liu (). Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.
Volume 28, issue 3, 1992
- Incentives for overhead cost reduction: Setup time and lot size considerations pp. 255-263

- G. G. Hegde and Nandu J. Nagarajan
- Impact of electronic data interchange technology on quality improvement and inventory reduction programs: A field study pp. 265-282

- Sunder Kekre and Tridas Mukhopadhyay
- Improved lot sizing heuristics for multi-stage inventory models with backlogging pp. 283-288

- József Vörös and Suresh Chand
- Expectation-variance analyss of job sequences under processing time uncertainty pp. 289-297

- Prabuddha De, Jay B. Ghosh and Charles E. Wells
- Timing the control point under the exponential stationary process pp. 299-307

- Lea Friedman
- The optimal mix of flexible and dedicated manufacturing capacities: Hedging against demand uncertainty pp. 309-319

- Diwakar Gupta, Yigal Gerchak and John A. Buzacott
- Impact of external factors on organizational performance pp. 321-339

- M. K. Kolay and K. C. Sahu
- Engineering changes and time delays: A field investigation pp. 341-352

- G. G. Hegde, Sham Kekre and Sunder Kekre
Volume 28, issue 2, 1992
- The future factory: Challenge for one-of-a-kind production pp. 131-142

- Eero Eloranta
- Production control in a kanban-like system with defective outputs pp. 143-155

- Yong-Joo Lee and Paul H. Zipkin
- Product mix selection and closed manufacturing cell flow time performance pp. 157-169

- Richard H. Deane and Jiaqin Yang
- A note on economic process levels under acceptance sampling by variables pp. 171-174

- Thomas O. Boucher and Mohsen A. Jafari
- Multi-item inventory policy under limited storehouse capacity pp. 175-191

- Keisuke Matsuyama
- Modeling the deep space network costs for future space missions by using major cost drivers pp. 193-202

- Donald S. Remer, Josef S. Sherif and Harry R. Buchanan
- A note on optimal order quantities for credit purchases pp. 203-210

- Robert L. Bregman
- Parameter estimation and performance measurement in lost sales inventory systems pp. 211-215

- Roger M. Hill
- The pallet loading problem: A survey pp. 217-225

- Balasubramanian Ram
- Multi-attribute decision model using the analytic hierarchy process for the justification of manufacturing systems pp. 227-234

- Vinay Datta, K. V. Sambasivarao, Rambabu Kodali and S. G. Deshmukh
- The economic lot and delivery scheduling problem: The single item case pp. 235-252

- Juho Hahm and Candace Arai Yano
Volume 28, issue 1, 1992
- Kitting versus line stocking: A conceptual framework and a descriptive model pp. 1-19

- Yavuz A. Bozer and Leon F. McGinnis
- EOQ type formulations for controlling repairable inventories pp. 21-33

- Marilyn C. Mabini, Liliane M. Pintelon and Ludo F. Gelders
- Competitive incentives for manufacturing flexibility pp. 35-45

- Matthew A. Waller and David P. Christy
- The "Orchard" scheduler for manufacturing systems pp. 47-70

- Robert J. Wittrock
- Productivity measurement in multi-product manufacturing firms: Evaluation and control through sensitivity analysis pp. 71-84

- Pradip K. Ray and S. Sahu
- Optimal production policy for a single-product single-machine problem with intermediate machine inspection allowed pp. 85-94

- C. S. Sung and Young Seok Ock
- Consensus and conflicts in understanding productivity pp. 95-106

- R. P. Mohanty
- Integrating design and production: A case study of the naval submarine program pp. 107-126

- Thomas J. Eccles and Henry S. Marcus
- Software development: Project management: by Dina Berkeley, Robert de Hoog and Patrick Humphreys, Ellis Horwood, 1990, ISBN 0-13-829847-5 pp. 127-128

- Zita Paprika
- Manufacturing & operations strategy: by Danny Samson, Prentice Hall, 1991, xi+499 pp pp. 127-127

- Krisztina Demeter
Volume 27, issue 3, 1992
- Analysing divergent logistic networks with local (R, S) inventory control pp. 187-219

- M. C. van der Heijden
- A strategic planning model for oilfield service and supply companies pp. 221-231

- Robert M. Bowker, James S. Dyer, James A. Fitzsimmons and Kingshuk K. Sinha
- A systematic procedure for the selection of bulk material handling equipment pp. 233-240

- Jayadev Velury and W. J. Kennedy
- A simple case of preventive maintenance decision-making with limited historical data pp. 241-250

- Edward A. Silver and Claude-Nicolas Fiechter
- An heuristic approach for finite time maintenance policy pp. 251-256

- V. Jayabalan and Dipak Chaudhuri
- Options in advanced energy-related production processes pp. 257-264

- L. J. O. Lint
- A dynamic approach to operations management: An alternative to static optimization pp. 265-282

- Ramachandran Jaikumar and Roger E. Bohn
- "On-the-fly" line balancing with very little WIP pp. 283-289

- John O. McClain, L. Joseph Thomas and Charles Sox
- The software engineers reference book: by John A. McDermid, Heinemann, 1991, 1032 pp pp. 291-291

- Gabor Urban
- Erfolgsstrategien fur Zulieferer (successful strategies of suppliers): by Robert Fieten, Gabler, 1991,220 pp pp. 292-292

- Andrea Gelei
Volume 27, issue 2, 1992
- Replacement analysis for components of large scale production systems pp. 97-110

- James T. Luxhoj
- Variations of order-level inventory models for deteriorating items pp. 111-117

- Adrijit Goswami and K. S. Chaudhuri
- Effects of cycle time on integrated procurement-production systems - Sensitivity analysis pp. 119-126

- S. K. Goyal, S. G. Deshmukh and A. Subash Babu
- The profit-oriented interval cutting problem: model and stability analysis pp. 127-133

- Knut Richter
- Comment on the "analytic Delphi method" pp. 135-136

- Kevin J. McCarthy
- Scheduling in n-job, m-stage flowshop with parallel processors to minimize makespan pp. 137-143

- Chandrasekharan Rajendran and Dipak Chaudhuri
- The manufacture of soda ash in the Arabian Gulf pp. 145-153

- K. M. Wagialla, I. S. Al-Mutaz and M. E. El-Dahshan
- Some results for inventory models having inventory level dependent demand rate pp. 155-160

- Mark Goh
- The rate of return regulated version of Farrell efficiency pp. 161-165

- Rolf Fare and James Logan
- An organizational approach to product quality via statistical experiment design pp. 167-173

- T. N. Goh
- Just-In-Time purchasing: Single or multiple sourcing? pp. 175-181

- Jae-Dong Hong and Jack C. Hayya
- Production control - A structural and design oriented approach: by J.W.M. Bertrand, J.C. Wortmann and J. Wijngaard, 1990, xi + 322 pp pp. 183-183

- Kaj Rosling
Volume 27, issue 1, 1992
- A clustering analysis of forecasting methods in a multi-objective inventory system pp. 1-8

- Abraham Mehrez and Michael Y. Hu
- Evaluating the introduction of JIT pp. 9-22

- Peter L. Primrose
- Determination of nested reorder intervals in a distribution network pp. 23-28

- Paul Iyogun
- A compact heuristic for common cycle lot-size scheduling in multi-stage, multi-product production processes pp. 29-41

- M. K. El-Najdawi
- Quality selection of a two-dimensional process level under single acceptance sampling by variables pp. 43-56

- Olle Carlsson
- Continuous quality improvement: Why some organisations lack commitment pp. 57-67

- B. G. Dale and K. Lightburn
- Quality costing for total quality management pp. 69-81

- Leslie J. Porter and Paul Rayner
- Innovative output and firm size in the pharmaceutical industry pp. 83-90

- Samuel B. Graves and Nan S. Langowitz
- Quality improvement through standards: by Barry Dale and John Oakland, Stanley Thornes (Publishers) ltd. 1991. ISBN 0-7487-05558-9, 268 pp pp. 91-91

- Kristina Demeter
- Storage and commodity markets: by Jeffry C. Williams and Brian D. Wright, Cambridge University Press, 1991, ISBN 0-521-32616-8 502 pp, $64.50 pp. 91-92

- Andrea Galei
| |