International Journal of Production Economics

1991 - 2025

Continuation of Engineering Costs and Production Economics.

Current editor(s): Stefan Minner

From Elsevier
Bibliographic data for series maintained by Catherine Liu ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 155, issue C, 2014

Ford Whitman Harris's economical lot size model pp. 12-15

Donald Erlenkotter

A century of evolution from Harris׳s basic lot size model: Survey and research agenda pp. 16-38

Alessandro Andriolo, Daria Battini, Robert W. Grubbström, Alessandro Persona and Fabio Sgarbossa

The lot sizing problem: A tertiary study pp. 39-51

Christoph H. Glock, Eric H. Grosse and Jörg M. Ries

Consignment stocking policy models for supply chain systems: A critical review and comparative perspectives pp. 52-67

Bhaba R. Sarker

Revisiting foundations in lot sizing—Connections between Harris, Crowther, Monahan, and Clark pp. 68-81

Patrick Beullens

Economic Order Quantities in production: From Harris to Economic Lot Scheduling Problems pp. 82-90

Martin Holmbom and Anders Segerstedt

A tight approximation for an EOQ model with supply disruptions pp. 91-108

Lawrence V. Snyder

Economic order quantity for growing items pp. 109-113

Jafar Rezaei

A new inventory model for cold items that considers costs and emissions pp. 114-125

Ali Bozorgi, Jennifer Pazour and Dima Nazzal

Economic order quantity models for imperfect items with buy and repair options pp. 126-131

Mohamad Y. Jaber, Simone Zanoni and Lucio E. Zavanella

An EOQ model for MRO customers under stochastic price to quantify bullwhip effect for the manufacturer pp. 132-142

ManMohan S. Sodhi, Navdeep S. Sodhi and Christopher S. Tang

Generalized EOQ formula using a new parameter: Coefficient of backorder attractiveness pp. 143-147

Georghios P. Sphicas

An EOQ model with backorders and rejection of defective supply batches pp. 148-154

K. Skouri, I. Konstantaras, A.G. Lagodimos and S. Papachristos

An inventory model for deteriorating items with shortages and time-varying demand pp. 155-162

Joaquín Sicilia, Manuel González-De-la-Rosa, Jaime Febles-Acosta and David Alcaide-López-de-Pablo

Optimal policy for an inventory system with power demand, backlogged shortages and production rate proportional to demand rate pp. 163-171

Joaquín Sicilia, Manuel González-De-la-Rosa, Jaime Febles-Acosta and David Alcaide-López-de-Pablo

An Economic Order Quantity model with partial backordering and all-units discount pp. 172-184

Ata Allah Taleizadeh and David W. Pentico

An EOQ model with partial backordering and advance payments for an evaporating item pp. 185-193

Ata Allah Taleizadeh

Optimal lot size for a production–inventory system with partial backlogging and mixture of dispatching policies pp. 194-203

Luis A. San-José, Joaquín Sicilia and Juan García-Laguna

Improved quality, setup cost reduction, and variable backorder costs in an imperfect production process pp. 204-213

Biswajit Sarkar and Ilkyeong Moon

An inventory model with both stock-dependent demand rate and stock-dependent holding cost rate pp. 214-221

Chih-Te Yang

Optimal vendor investment for reducing defect rate in a vendor–buyer integrated system with imperfect production process pp. 222-228

O. Dey and B.C. Giri

Joint pricing and ordering policy for two echelon imperfect production inventory model with two cycles pp. 229-238

Brojeswar Pal, Shib Sankar Sana and Kripasindhu Chaudhuri

Optimal lot-sizing integration policy under learning and rework effects in a manufacturer–retailer chain pp. 239-248

Tsung-Hui Chen and Yu-Chung Tsao

A production-inventory model for a two-echelon supply chain when demand is dependent on sales teams׳ initiatives pp. 249-258

Leopoldo Eduardo Cárdenas-Barrón and Shib Sankar Sana

A fuzzy vendor managed inventory of multi-item economic order quantity model under shortage: An ant colony optimization algorithm pp. 259-271

Ali Roozbeh Nia, Mohammad Hemmati Far and Seyed Taghi Akhavan Niaki

Joint economic lot sizing problem for a three—Layer supply chain with stochastic demand pp. 272-283

Hisham M. Abdelsalam and Magy M. Elassal

Retailer’s economic order quantity when the supplier offers conditionally permissible delay in payments link to order quantity pp. 284-291

Sheng-Chih Chen, Leopoldo Eduardo Cárdenas-Barrón and Jinn-Tsair Teng

Lot-sizing policies for deteriorating items with expiration dates and partial trade credit to credit-risk customers pp. 292-301

Jiang Wu and Ya-Lan Chan

Economic production quantity models for deteriorating items with up-stream full trade credit and down-stream partial trade credit pp. 302-309

Sheng-Chih Chen, Jinn-Tsair Teng and Konstantina Skouri

An inventory model with non-instantaneous receipt and exponentially deteriorating items for an integrated three layer supply chain system under two levels of trade credit pp. 310-317

Kun-Jen Chung, Leopoldo Eduardo Cárdenas-Barrón and Pin-Shou Ting

Optimal trade credit and lot size policies in economic production quantity models with learning curve production costs pp. 318-323

Jinn-Tsair Teng, Kuo-Ren Lou and Lu Wang

A note on “optimal replenishment policies for non-instantaneous deteriorating items with price and stock sensitive demand under permissible delay in payment” pp. 324-329

Jiang Wu, Konstantina Skouri, Jinn-Tsair Teng and Liang-Yuh Ouyang

A periodic review lot sizing problem with random yields, disruptions and inventory capacity pp. 330-339

Daqin Wang, Ou Tang and Lihua Zhang

Analysis of batch ordering inventory models with setup cost and capacity constraint pp. 340-350

Yi Yang, Quan Yuan, Weili Xue and Yun Zhou

Lot sizing and lead time decisions in production/inventory systems pp. 351-360

Ann M. Noblesse, Robert N. Boute, Marc R. Lambrecht and Benny Van Houdt

The dynamic lot-sizing problem with convex economic production costs and setups pp. 361-379

Ramez Kian, Ülkü Gürler and Emre Berk

The capacitated Lot Sizing model: A powerful tool for logistics decision making pp. 380-390

Giuseppe Bruno, Andrea Genovese and Carmela Piccolo

Improved solutions for inventory-routing problems through valid inequalities and input ordering pp. 391-397

Leandro C. Coelho and Gilbert Laporte

A production–repair inventory model with time-varying demand and multiple setups pp. 398-405

Mohd Omar and Ivan Yeo

Optimal ordering and pricing policy for demand functions that are separable into price and inventory age pp. 406-417

Tal Avinadav, Avi Herbon and Uriel Spiegel

Lot size optimization in manufacturing systems: The surrogate method pp. 418-426

Ludovica Adacher and Christos G. Cassandras

Volume 154, issue C, 2014

Supply chain downsizing under bankruptcy: A robust optimization approach pp. 1-15

J. Ashayeri, N. Ma and Renata Sotirov

Safety stock management in single vendor–single buyer problem under VMI with consignment stock agreement pp. 16-31

Marcello Braglia, Davide Castellano and Marco Frosolini

Choice of supply chain governance: Self-managing or outsourcing? pp. 32-38

Qing Lu, Fanwen Meng and Mark Goh

The impact of knowledge management capabilities and supplier relationship management on corporate performance pp. 39-47

Shu-Mei Tseng

Demand chain management: Relationships between external antecedents, web-based integration and service innovation performance pp. 48-58

Alain Yee-Loong Chong and Li Zhou

Impact of operational and marketing capabilities on firm performance: Evidence from economic growth and downturns pp. 59-71

Muhammad Usman Ahmed, Mehmet Murat Kristal and Mark Pagell

Data quality for data science, predictive analytics, and big data in supply chain management: An introduction to the problem and suggestions for research and applications pp. 72-80

Benjamin T. Hazen, Christopher A. Boone, Jeremy D. Ezell and L. Allison Jones-Farmer

Optimal reservation policies and market segmentation pp. 81-99

George Georgiadis and Christopher S. Tang

Robust price-setting newsvendor model with interval market size and consumer willingness-to-pay pp. 100-112

Charles Wang, Scott Webster and Sidong Zhang

Selecting machines and buffers in unreliable assembly/disassembly manufacturing networks pp. 113-126

Nabil Nahas, Mustapha Nourelfath and Michel Gendreau

Supplier selection of a critical component when the production process can be improved pp. 127-135

Hubert Pun

Learning dependent job scheduling in mass customized scenarios considering ergonomic factors pp. 136-145

Michel J. Anzanello, Flavio S. Fogliatto and Luana Santos

Product quality and return policy in a supply chain under risk aversion of a supplier pp. 146-155

Seung Ho Yoo

Competitive pricing and ordering decisions in a multiple-channel supply chain pp. 156-165

Chung-Chi Hsieh, Yih-Long Chang and Cheng-Han Wu

Achieving sustainable new product development by integrating product life-cycle management capabilities pp. 166-177

Harald Gmelin and Stefan Seuring

Newsvendor model with random supply and financial hedging: Utility-based approach pp. 178-189

F. Sayın, F. Karaesmen and S. Özekici

Technology investment under flexible capacity strategy with demand uncertainty pp. 190-197

Liu Yang, Yonggui Wang, Jun Ma, Chi To Ng and T.C.E. Cheng

Analyzing the impacts of carbon regulatory mechanisms on supplier and mode selection decisions: An application to a biofuel supply chain pp. 198-216

Gökçe Palak, Sandra Duni Ekşioğlu and Joseph Geunes

Monopoly production and pricing of finitely durable goods with strategic consumers׳ fluctuating willingness to pay pp. 217-232

Vera Tilson and Xiaobo Zheng

Price competition for retailers with profit and revenue targets pp. 233-242

Shilei Yang, Shi, Chunming (Victor), Yibin Zhang and Jing Zhu

A coordination framework for sales and operations planning (S&OP): Synthesis from the literature pp. 243-262

Nina Tuomikangas and Riikka Kaipia

When and for whom would e-waste be a treasure trove? Insights from a network equilibrium model of e-waste flows pp. 263-273

Tina Wakolbinger, Fuminori Toyasaki, Thomas Nowak and Anna Nagurney

Customer balking behavior in the newsvendor model: Its impact on performance measures and decision under uncertain balking parameters pp. 274-283

Se Won Lee and Uk Jung

Global purchasing strategy and International Purchasing Offices: Evidence from case studies pp. 284-298

Fu Jia, Richard Lamming, Marco Sartor, Guido Orzes and Guido Nassimbeni

Product and sales contract design in remanufacturing pp. 299-312

Baris Yalabik, Dilip Chhajed and Nicholas C. Petruzzi

A note on generalized single-vendor multi-buyer integrated inventory supply chain models with better synchronization pp. 313-316

Moncer Hariga, Elkafi Hassini and Mohamed Ben-Daya