International Journal of Production Economics

1991 - 2025

Continuation of Engineering Costs and Production Economics.

Current editor(s): Stefan Minner

From Elsevier
Bibliographic data for series maintained by Catherine Liu ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 125, issue 2, 2010

The knowledge management strategy and its effect on firm performance: A contingency analysis pp. 215-223

Jie Yang

Buffer and throughput trade-offs in M/G/1/K queueing networks: A bi-criteria approach pp. 224-234

F.R.B. Cruz, Tom van Woensel and J. MacGregor Smith

A two-location inventory model with transshipments in a competitive environment pp. 235-250

Li Zou, Martin Dresner and Robert Windle

Profile and enablers of agile companies: An empirical investigation pp. 251-261

Eleonora Bottani

Supply chain integration with third-party logistics providers pp. 262-271

Jayanth Jayaram and Keah-Choon Tan

Design and integration of the containers inspection activities in the container terminal operations pp. 272-283

Francesco Longo

Formulating partner selection criteria for agile supply chains: A Dempster-Shafer belief acceptability optimisation approach pp. 284-293

Chong Wu and David Barnes

Scheduling deteriorating jobs under disruption pp. 294-299

Chuan-Li Zhao and Heng-Yong Tang

Inventory control policies for inspection and remanufacturing of returns: A case study pp. 300-312

George Nenes, Sofia Panagiotidou and Rommert Dekker

An investment evaluation of supply chain RFID technologies: A normative modeling approach pp. 313-323

In Lee and Byoung-Chan Lee

Workforce agility for stochastically diffused conditions--A real options perspective pp. 324-334

Ruwen Qin and David A. Nembhard

Addendum to "an assessment of world-wide research productivity in production and operations management" pp. 335-338

Pao-Nuan Hsieh

Letter to the Editor-in-Chief pp. 339-339

S.K. Goyal

Volume 125, issue 1, 2010

Axiomatic design application for minimising the difficulties of QFD usage pp. 1-12

José Antonio Carnevalli, Paulo Augusto Cauchick Miguel and Felipe Araújo Calarge

Variations of the kanban system: Literature review and classification pp. 13-21

Muris Lage Junior and Moacir Godinho Filho

A review of marketing-operations interface models: From co-existence to coordination and collaboration pp. 22-40

Christopher S. Tang

A simulation-supported approach for man-machine configuration in manufacturing pp. 41-51

Gert Zülch and Marcel Becker

Robust optimization in simulation: Taguchi and Response Surface Methodology pp. 52-59

Gabriella Dellino, Jack Kleijnen and Carlo Meloni

Small medium manufacturing enterprises in Turkey: An analytic network process framework for prioritizing factors affecting success pp. 60-70

Birsen Karpak and Ilker Topcu

Optimal radio frequency identification deployment in a supply chain network pp. 71-83

Seokcheol Chang, Diego Klabjan and Thomas Vossen

Channel selection and pricing in the presence of retail-captive consumers pp. 84-95

Moutaz Khouja, Sungjune Park and Cai, Gangshu (George)

Estimating a Bayesian stochastic frontier for the Indian banking system pp. 96-110

Benjamin Tabak and Patricia Langsch Tecles

A process control approach to tactical inventory management in production-inventory systems pp. 111-124

Jay D. Schwartz and Daniel E. Rivera

Capacity rationing decision procedures with order profit as a continuous random variable pp. 125-136

Yi-Feng Hung and Tzu-Yuan Lee

Vehicle routing problems with time windows and stochastic travel and service times: Models and algorithm pp. 137-145

Xiangyong Li, Peng Tian and Stephen C.H. Leung

Policies concerning decisions related to quality level pp. 146-152

Sanjay Sharma

Analysis of simple inventory control systems with execution errors: Economic impact under correction opportunities pp. 153-166

Esma S. Gel, Nesim Erkip and Anoop Thulaseedas

On the optimal product assortment: Comparing product and customer based strategies pp. 167-172

Simme Douwe P. Flapper, José Luis González-Velarde, Neale R. Smith and Luis Jacob Escobar-Saldívar

Separate tools or tool kits: An exploratory study of engineers' preferences pp. 173-184

I.M.H. Vliegen, P.A.M. Kleingeld and G.J. van Houtum

On three-machine flow shop scheduling with deteriorating jobs pp. 185-189

Ling Wang, Lin-Yan Sun, Lin-Hui Sun and Ji-Bo Wang

A distributed coordination for a single warehouse-multiple retailer problem under private information pp. 190-199

Dong Joo Lee and In-Jae Jeong

Order acceptance and scheduling decisions in make-to-order systems pp. 200-211

Og[breve]uz, Ceyda, F. Sibel Salman and Zehra Bilgintürk YalçIn

Erratum to "A one-vendor multi-buyer integrated production-inventory model: The 'Consignment Stock' case" [Interntational Journal of Production Economics, 118 (2009) 225-232] pp. 212-213

Lucio Zavanella and Simone Zanoni

Volume 124, issue 2, 2010

Returns policy, new model introduction, and consumer welfare pp. 299-309

Kenji Matsui

The evolutionary complexity of complex adaptive supply networks: A simulation and case study pp. 310-330

Gang Li, Hongjiao Yang, Linyan Sun, Ping Ji and Lei Feng

Coordination contracts in the presence of positive inventory financing costs pp. 331-339

Chang Hwan Lee and Byong-Duk Rhee

Lot sizing with a Markov production process and imperfect items scrapped pp. 340-347

Bacel Maddah, Lama Moussawi and Mohamad Y. Jaber

Proposing a new approach to discussing economic effects of design quality pp. 348-359

Johannes Freiesleben

Using indirect cost multipliers to estimate the total cost of adding new technology in the automobile industry pp. 360-368

Alex Rogozhin, Michael Gallaher, Gloria Helfand and Walter McManus

Analyzing the effect of dispatching rules on the scheduling performance through grammar based flexible scheduling system pp. 369-381

Adil Baykasoglu and Lale ÖzbakIr

System reliability of a stochastic-flow network through two minimal paths under time threshold pp. 382-387

Yi-Kuei Lin

Preservation technology investment for deteriorating inventory pp. 388-394

P.H. Hsu, H.M. Wee and H.M. Teng

Effect of the third-party warehouse on bullwhip effect and inventory cost in supply chains pp. 395-407

Truong Ton Hien Duc, Huynh Trung Luong and Yeong-Dae Kim

Optimal multi-stage logistic and inventory policies with production bottleneck in a serial supply chain pp. 408-413

Yu-Cheng Hsiao, Yi Lin and Yun-Kuei Huang

When is RFID right for your service? pp. 414-425

Geraldo Ferrer, Nicholas Dew and Uday Apte

The impact of RFID and EPC network on the bullwhip effect in the Italian FMCG supply chain pp. 426-432

Eleonora Bottani, Roberto Montanari and Andrea Volpi

Heuristic algorithms for production and transportation planning through synchronization of a serial supply chain pp. 433-447

Jung Woo Jung and Young Hae Lee

The loss-averse newsvendor game pp. 448-452

Charles Wang

Efficient overtime planning in packing shops with lines of identical manning pp. 453-462

A.G. Lagodimos and A.N. Mihiotis

A production planning model to reduce risk and improve operations management pp. 463-474

X. Wang, D. Li, C. O'brien and Y. Li

LT variance or LT mean reduction in supply chain management: Which one has a higher impact on SC performance? pp. 475-481

S. Kamal Chaharsooghi and Jafar Heydari

The economic lot-sizing problem with remanufacturing and one-way substitution pp. 482-488

Pedro Piñeyro and Omar Viera

Supply integration: An investigation of its multi-dimensionality and relational antecedents pp. 489-505

Leo R. Vijayasarathy

Volume 124, issue 1, 2010

The environment as a determining factor of purchasing and supply strategy: An empirical analysis of Brazilian firms pp. 1-10

Javier González-Benito, Duilio Reis da Rocha and Dolores Queiruga

Inventory optimization in a one product recoverable manufacturing system pp. 11-19

S. Sebnem Ahiska and Russell E. King

Designing multi-attribute auctions for engineering services procurement in new product development in the automotive context pp. 20-31

G. Perrone, P. Roma and G. Lo Nigro

Managing yield by lot splitting in a serial production line with learning, rework and scrap pp. 32-39

Mohamad Y. Jaber and Mehmood Khan

Crane scheduling in a shipbuilding environment pp. 40-50

Charlie Wen, Sandra Duni Eksioglu, Allen Greenwood and Shu Zhang

Life cycle inventory policy characterizations for a single-product recoverable system pp. 51-61

S. Sebnem Ahiska and Russell E. King

Entry timing in a secondary market: When to trade? pp. 62-74

Tingting Yan and Kevin J. Dooley

A classification of logistic outsourcing levels and their impact on service performance: Evidence from the food processing industry pp. 75-86

H.I. Hsiao, Ron Kemp, J.G.A.J. van der Vorst and (Onno) Omta, S.W.F.

Economic order quantity model for items with imperfect quality with learning in inspection pp. 87-96

Muhammd Asghar Khan, M.Y. Jaber and M.I.M. Wahab

A bilinear goal programming model and a modified Benders decomposition algorithm for supply chain reconfiguration and supplier selection pp. 97-105

Hany Osman and Kudret Demirli

Note on: A necessary and sufficient conditions for the existence of the optimal solution of a single-vendor single-buyer integrated production-inventory model with process unreliability consideration pp. 106-108

Daesung Ha

An empirical study of employee loyalty, service quality and firm performance in the service industry pp. 109-120

Rachel W.Y. Yee, Andy C.L. Yeung and T.C. Edwin Cheng

Game-theoretic approach to simultaneous configuration of platform products and supply chains with one manufacturing firm and multiple cooperative suppliers pp. 121-136

Xinyan Zhang and George Q. Huang

Competition and cooperation in a single-retailer two-supplier supply chain with supply disruption pp. 137-150

Jian Li, Shouyang Wang and T.C.E. Cheng

Scheduling problems with multiple maintenance activities and non-preemptive jobs on two identical parallel machines pp. 151-158

Kaibiao Sun and Hongxing Li

A method for partner selection of codevelopment alliances using individual and collaborative utilities pp. 159-170

Bo Feng, Zhi-Ping Fan and Jian Ma

Coordination of a supply chain with consumer return under demand uncertainty pp. 171-180

Tiaojun Xiao, Kuiran Shi and Danqin Yang

A stochastic model to study the system capacity for supply chains in terms of minimal cuts pp. 181-187

Yi-Kuei Lin

A two-machine flowshop scheduling problem with deteriorating jobs and blocking pp. 188-197

Wen-Chiung Lee, Yau-Ren Shiau, Shiuan-Kang Chen and Chin-Chia Wu

Optimal age for preventive replacement under a combined fully renewable free replacement with a pro-rata warranty pp. 198-205

Yu-Hung Chien

Multi-objective job-shop scheduling with lot-splitting production pp. 206-213

Rong-Hwa Huang

Supply flexibility strategies in Spanish firms: Results from a survey pp. 214-224

Elcio M. Tachizawa and Cristina Gimenez

On integrating theories of international economics in the strategic planning of global supply chains and facility location pp. 225-240

Chaehwa Lee and Wilbert Wilhelm

A comparative study of pull control mechanisms for unreliable homogenous transfer lines pp. 241-251

P. Lavoie, A. Gharbi and J.-P. Kenné

Integrating sustainability into supplier selection with grey system and rough set methodologies pp. 252-264

Chunguang Bai and Joseph Sarkis

An analysis of apple supply response pp. 265-271

Stephen Devadoss and Jeff Luckstead

Project performance development framework: An approach for developing performance criteria & measures for information systems (IS) projects pp. 272-292

Corlane Barclay and Kweku-Muata Osei-Bryson

The viewpoint on "Optimal inventory policy with non-instantaneous receipt under trade credit by Ouyang, Teng, Chuang and Chuang" pp. 293-298

Kun-Jen Chung