International Journal of Production Economics

1991 - 2025

Continuation of Engineering Costs and Production Economics.

Current editor(s): Stefan Minner

From Elsevier
Bibliographic data for series maintained by Catherine Liu ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 100, issue 2, 2006

Supplier coalitions in on-line reverse auctions: Validity requirements and profit distribution scheme pp. 183-194

Mingzhou Jin and S. David Wu

Optimal ordering policies in response to a discount offer pp. 195-211

Bhaba R. Sarker and Mahmood Al Kindi

Vendor performance with supply risk: A chance-constrained DEA approach pp. 212-222

Srinivas Talluri, Ram Narasimhan and Anand Nair

Designing supply chains: Towards theory development pp. 223-238

Mark A. Vonderembse, Mohit Uppal, Samuel H. Huang and John P. Dismukes

Setting operating policies for supply hubs pp. 239-252

Janat Shah and Mark Goh

User-oriented design for the optimal combination on product design pp. 253-267

Hsin-Hsi Lai, Yang-Cheng Lin, Chung-Hsing Yeh and Chien-Hung Wei

Impact of demand uncertainty on supply chain cooperation of single-period products pp. 268-284

Zhongsheng Hua, Sijie Li and Liang Liang

Agility index in the supply chain pp. 285-299

Ching-Torng Lin, Hero Chiu and Po-Young Chu

A simulation-based evaluation of the cost of cycle time reduction in Agere Systems wafer fabrication facility--a case study pp. 300-313

Dima Nazzal, Mansooreh Mollaghasemi and Dave Anderson

A comparison of product costing practices in discrete-part and assembly manufacturing and continuous production process manufacturing pp. 314-321

John A. Brierley, Christopher J. Cowton and Colin Drury

Metaheuristic algorithms for the multistage hybrid flowshop scheduling problem pp. 322-334

Zhihong Jin, Zan Yang and Takahiro Ito

Inventory of differential items selling from two shops under a single management with periodically increasing demand over a finite time-horizon pp. 335-347

Jayanta Kumar Dey, Samarjit Kar, Ashok Kumar Bhuina and Manoranjan Maiti

Applying fuzzy linguistic quantifier to select supply chain partners at different phases of product life cycle pp. 348-359

Sheng-Lin Chang, Reay-Chen Wang and Shih-Yuan Wang

Volume 100, issue 1, 2006

Lot size effects on process lead time, lead time demand, and safety stock pp. 1-9

Timothy S. Vaughan

MCDM in a fuzzy setting: Investment projects assessment application pp. 10-29

L. Dimova, P. Sevastianov and D. Sevastianov

Order-planning model and algorithm for manufacturing steel sheets pp. 30-43

Shixin Liu, Jiafu Tang and Jianhai Song

Sequencing precedence-related jobs on two machines to minimize the weighted completion time pp. 44-58

Girish Ramachandra and Salah E. Elmaghraby

EOQ and EPQ with linear and fixed backorder costs: Two cases identified and models analyzed without calculus pp. 59-64

Georghios P. Sphicas

Multi-attribute responsive dispatching strategies for automated guided vehicles pp. 65-75

Umit Bilge, Gokce Esenduran, Nebibe Varol, Zeynep Ozturk, Burcu AydIn and Aysun Alp

Analysis of an inventory system with exponential partial backordering pp. 76-86

L.A. San José, J. Sicilia and J. Garcia-Laguna

Operation management in reconfigurable manufacturing systems: Reconfiguration for error handling pp. 87-100

Manfredi Bruccoleri, Zbigniew J. Pasek and Yoram Koren

An approximate periodic model for fixed-life perishable products in a two-echelon inventory-distribution system pp. 101-115

Kanchana Kanchanasuntorn and Anulark Techanitisawad

The optimal ordering policy in a DCF analysis for deteriorating items when trade credit depends on the order quantity pp. 116-130

Kun-Jen Chung and Jui-Jung Liao

University library benchmarking: An international comparison using DEA pp. 131-147

Gerhard Reichmann and Margit Sommersguter-Reichmann

Economic ordering quantity models for items with imperfect quality pp. 148-154

S. Papachristos and I. Konstantaras

Modeling decision making and control in manufacturing simulation pp. 155-167

D.J. van der Zee

New exact method to solve the Pm/rj/[summation operator]Cj schedule problem pp. 168-179

F. Yalaoui and C. Chu

Volume 99, issue 1-2, 2006

Control and management of productive systems pp. 1-3

Abdelhakim Artiba and Michel Gourgand

Flow shop scheduling problem with limited machine availability: A heuristic approach pp. 4-15

Riad Aggoune and Marie-Claude Portmann

Scheduling of a two-machine flowshop with availability constraints on the first machine pp. 16-27

H. Allaoui, A. Artiba, S.E. Elmaghraby and F. Riane

A heuristic for scheduling a permutation flowshop with makespan objective subject to maximum tardiness pp. 28-40

Jose M. Framinan and Rainer Leisten

Stochastic algorithms: Using the worst to reach the best pp. 41-51

Pierre Baptiste

Operating rooms scheduling pp. 52-62

AIda Jebali, Atidel B. Hadj Alouane and Pierre Ladet

A linear programming approach for identical parallel machine scheduling with job splitting and sequence-dependent setup times pp. 63-73

Djamel Nait Tahar, Farouk Yalaoui, Chengbin Chu and Lionel Amodeo

Scheduling issues for environmentally responsible manufacturing: The case of hoist scheduling in an electroplating line pp. 74-87

Corinne SubaI, Pierre Baptiste and Eric Niel

Throughput maximization in serial production lines with worksharing pp. 88-101

Jiaqiong Chen and Ronald G. Askin

Dynamic card controlling in a Conwip system pp. 102-116

Jose M. Framinan, Pedro L. Gonzalez and Rafael Ruiz-Usano

Comparison of negotiation protocols in dynamic agent-based manufacturing systems pp. 117-130

Jihad Reaidy, Pierre Massotte and Daniel Diep

Analysis of a production/inventory system with randomly failing production unit subjected to a minimum required availability level pp. 131-143

Anis Chelbi and Nidhal Rezg

Optimal design of work-in-process buffers pp. 144-155

Jose Faria, Manuel Matos and Eusebio Nunes

Urban traffic systems modelling methodology pp. 156-176

Michelle Chabrol, David Sarramia and Nikolay Tchernev

A sequential heuristic procedure for the two-dimensional cutting-stock problem pp. 177-185

S.M.A. Suliman

Value and risk assessment of supply chain management improvement projects pp. 186-201

Alessandro Brun, Maria Caridi, Kamal Fahmy Salama and Ivan Ravelli

An investigation into the use of ERP systems in the service sector pp. 202-221

Valerie Botta-Genoulaz and Pierre-Alain Millet

Scalable enterprise systems: Quality management issues pp. 222-235

Cecilia Temponi

Adaptive control charts: A Markovian approach for processes subject to independent disturbances pp. 236-246

Maysa S. De Magalhaes, Antonio F. B. Costa and Francisco D. Moura Neto

Volume 98, issue 3, 2005

Flexibility of manufacturing systems, strategic change and performance pp. 273-289

F. Javier Llorens, Luis M. Molina and Antonio J. Verdu

Optimal inventory policy with noninstantaneous receipt under trade credit pp. 290-300

Liang-Yuh Ouyang, Jinn-Tsair Teng, Kai-Wayne Chuang and Bor-Ren Chuang

The role of elasticity in supply chain performance pp. 301-314

Bradley Hull

Suppliers capability and price analysis chart pp. 315-327

K.L. Chen, K.S. Chen and R.K. Li

Applying possibilistic linear programming to aggregate production planning pp. 328-341

Reay-Chen Wang and Tien-Fu Liang

Volume 98, issue 2, 2005

Foreword pp. 113-113

Jose A. Ceroni and Shimon Y. Nof

Decentralized control of cooperative and autonomous agents for solving the distributed resource allocation problem pp. 114-128

Pornthep Anussornnitisarn, Shimon Y. Nof and Opher Etzion

Adaptive genetic algorithm for lot-sizing problem with self-adjustment operation rate pp. 129-135

Nguyen Van Hop and Mario T. Tabucanon

An integrated distribution routing model in multi-supply center system pp. 136-142

Heung-Suk Hwang

Costing RAM design and test analysis model for production facility pp. 143-149

Heung-Suk Hwang

A distributed dispatching method for the brokerage of truckload freights pp. 150-161

Kap Hwan Kim, Woo Jun Chung, Hark Hwang and Chang Seong Ko

An analysis of the end-of-aisle order picking system: Multi-aisle served by a single order picker pp. 162-171

Shie-Gheun Koh, Hyuck-Moo Kwon and Young-Jin Kim

Optimal design of rack structure with modular cell in AS/RS pp. 172-178

Young Hae Lee, Moon Hwan Lee and Sun Hur

Architectures, methods and tools for enterprise engineering pp. 179-188

K. Mertins and R. Jochem

Achievement assessment for enterprise resource planning (ERP) system implementations based on critical success factors (CSFs) pp. 189-203

Albert Y.T. Sun, Abe Yazdani and John D. Overend

A heuristic algorithm for a multi-product dynamic lot-sizing and shipping problem pp. 204-214

Woon-Seek Lee, Jong-Han Han and Sung-Jin Cho

Economic statistical process control for multivariate quality characteristics under Weibull shock model pp. 215-226

S.F. Yang and M.A. Rahim

Development of a flexible and programmable parts feeding system pp. 227-237

M.L. Tay, Patrick S.K. Chua, S.K. Sim and Y. Gao

A new approach to job shop scheduling problems with due date constraints considering operation subcontracts pp. 238-250

Daeyoung Chung, Kichang Lee, Kitae Shin and Jinwoo Park

Recent network design techniques using evolutionary algorithms pp. 251-261

Mitsuo Gen, Anup Kumar and Jong Ryul Kim

Information behavior in the determination of functional specifications for new product development pp. 262-270

Kazuyoshi Ishii, Takaya Ichimura and Ichiro Mihara

Volume 98, issue 1, 2005

Pricing in revenue management for multiple firms competing for customers pp. 1-16

Yue Dai, Xiuli Chao, Shu-Cherng Fang and Henry L.W. Nuttle

The tale of two research communities: The diffusion of research on productive efficiency pp. 17-40

Finn Førsund and Nikias Sarafoglou

Supply network dynamics as a source of new business pp. 41-55

Ari-Pekka Hameri and Antti Paatela

A framework of ERP systems implementation success in China: An empirical study pp. 56-80

Zhe Zhang, Matthew K.O. Lee, Pei Huang, Liang Zhang and Xiaoyuan Huang

Scheduling a single batch processing machine with arbitrary job sizes and incompatible job families pp. 81-96

Shie-Gheun Koh, Pyung-Hoi Koo, Dong-Chun Kim and Won-Suk Hur

A simple recovery strategy for economic lot scheduling problem: A two-product case pp. 97-107

Loon Ching Tang and Loo Hay Lee

Errata to "A robust optimization model for stochastic logistic problems": [International Journal of Production Economics, 64 (2000) 385-397] pp. 108-109

Ali Yasar