International Journal of Production Economics

1991 - 2025

Continuation of Engineering Costs and Production Economics.

Current editor(s): Stefan Minner

From Elsevier
Bibliographic data for series maintained by Catherine Liu ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 103, issue 2, 2006

Perspectives in supply chain risk management pp. 451-488

Christopher S. Tang

Economic analysis of paper recycling vis-a-vis wood as raw material pp. 489-508

Rupesh Kumar Pati, Prem Vrat and Pradeep Kumar

The comparative productivity efficiency for global telecoms pp. 509-526

Hsiang-Chih Tsai, Chun-Mei Chen and Gwo-Hshiung Tzeng

Optimal ordering policy in a distribution system pp. 527-534

Jing-An Li, Yue Wu, Kin Keung Lai and Ke Liu

The effects of manufacturing control strategies on the cash conversion cycle in manufacturing systems pp. 535-550

M. Ozbayrak and M. Akgun

A case-injected genetic algorithm for single machine scheduling problems with release time pp. 551-564

Pei-Chann Chang, Jih-Chang Hsieh and Chen-Hao Liu

Process capability monitoring chart with an application in the silicon-filler manufacturing process pp. 565-571

K.S. Chen, K.T. Yu and S.H. Sheu

Two-machine flowshop scheduling to minimize mean flow time under linear deterioration pp. 572-584

Chin-Chia Wu and Wen-Chiung Lee

Strategic management of logistics service: A fuzzy QFD approach pp. 585-599

Eleonora Bottani and Antonio Rizzi

Balancing of parallel assembly lines pp. 600-609

Hadi Gokcen, Kursad Agpak and Recep Benzer

Productivity outcomes of teamwork as an effect of information technology and team size pp. 610-615

Hamid Tohidi and Mohammad Jafar Tarokh

Evaluation of the conversion from central storage to decentralized storages in cellular manufacturing environments using activity-based costing pp. 616-632

Sule Itir Satoglu, M. Bulent Durmusoglu and Ibrahim Dogan

Scheduling in static jobshops for minimizing mean flowtime subject to minimum total deviation of job completion times pp. 633-647

Viswanath Kumar Ganesan and Appa Iyer Sivakumar

The optimal frozen period in a dynamic production model pp. 648-655

Zhaotong Lian, Abhijit Deshmukh and Jin Wang

On the validity of aggregate models in designing supply chain contracts pp. 656-666

Mirko Kremer, Christoph Schneeweiss and Michael Zimmermann

Managing the trade-off implications of global supply pp. 667-679

Roy Stratton and Roger D.H. Warburton

A comparative analysis of storage and retrieval equipment at a container terminal pp. 680-693

Iris Vis

International sourcing: Empirical evidence from a sample of Italian firms pp. 694-706

Guido Nassimbeni

Optimal order policy for deteriorating items with inflation induced demand pp. 707-714

Chandra K. Jaggi, K.K. Aggarwal and S.K. Goel

Cyclic production-inventory planning and control in the pre-Deco industry: A case study pp. 715-725

J. Ashayeri, R.J.M. Heuts, H.G.L. Lansdaal and Leo Strijbosch

A hybrid approach to the valuation of RFID/MEMS technology applied to ordnance inventory pp. 726-741

Kenneth H. Doerr, William R. Gates and John E. Mutty

An empirical comparison of Tabu Search, Simulated Annealing, and Genetic Algorithms for facilities location problems pp. 742-754

Marvin Arostegui, Sukran N. Kadipasaoglu and Basheer M. Khumawala

A supplier allocation model considering delivery failure, maintenance and supplier cycle costs pp. 755-766

Alex J. Ruiz-Torres and Farzad Mahmoodi

A comprehensive mathematical model for the design of cellular manufacturing systems pp. 767-783

Fantahun M. Defersha and Mingyuan Chen

A variant of the Hungarian inventory control model pp. 784-797

Nilay Noyan and Andras Prekopa

A master scheduling model with skilled and unskilled temporary workers pp. 798-809

Atthawit Techawiboonwong, Pisal Yenradee and Sanchoy K. Das

Generating Pareto schedules with outsource and internal parallel resources pp. 810-825

Alex J. Ruiz-Torres, Johnny C. Ho and Francisco J. Lopez

Carrier-mode logistics optimization of inbound supply chains for electronics manufacturing pp. 826-840

Jeffery K. Cochran and Balaji Ramanujam

A bounded dynamic programming solution to the batching problem in mixed-model just-in-time manufacturing systems pp. 841-862

Mesut Yavuz and Suleyman Tufekci

Productivity of production labor, non-production labor, and capital: An international study pp. 863-872

John G. Wacker, Chen-Lung Yang and Chwen Sheu

A new approach for buffer allocation in unreliable production lines pp. 873-881

Nabil Nahas, Daoud Ait-Kadi and Mustapha Nourelfath

Minimizing makespan on a batch-processing machine with non-identical job sizes using genetic algorithms pp. 882-891

Purushothaman Damodaran, Praveen Kumar Manjeshwar and Krishnaswami Srihari

A note on: Optimal ordering policies in response to a discount offer pp. 892-892

S.K. Goyal

Erratum to: "Incorporating transport cost in the lot size and pricing decisions with downward sloping demand": [International Journal of Production Economics 95, 297-305] pp. 893-894

P.L. Abad and Vijay Aggarwal

Erratum to "Optimal ordering policies in response to discount offer" [International Journal of Production Economics 100 (2006) 195-211] pp. 895-895

Bhaba R. Sarker and Mahmood Al Kindi

Erratum to: "Lot size effects on process lead time, lead time demand, and safety stock": [International Journal of Production Economics 100 (2006) 1-9] pp. 896-896

T.S. Vaughan

Volume 103, issue 1, 2006

Rotational allocation of tasks to multifunctional workers in a service industry pp. 3-9

Albert Corominas, Rafael Pastor and Ericka Rodriguez

Little's Law in a continuous setting pp. 10-16

Herbert Jodlbauer and Wolfgang Stocher

Cost estimation in mechanical production: The Cost Entity approach applied to integrated product engineering pp. 17-35

Fehmi H'mida, Patrick Martin and Francois Vernadat

On the stock control performance of intermittent demand estimators pp. 36-47

Aris A. Syntetos and John E. Boylan

Temporal technical and profit efficiency measurement: Definitions, duality and aggregation results pp. 48-63

Walter Briec, Christine Comes and Kristiaan Kerstens

Financial risk management in the planning of refinery operations pp. 64-86

Arkadej Pongsakdi, Pramoch Rangsunvigit, Kitipat Siemanond and Miguel J. Bagajewicz

A note on "a hybrid genetic algorithm for the dynamic plant layout problem" pp. 87-89

Jaydeep Balakrishnan and Chun Hung Cheng

Integrated project evaluation and selection using multiple-attribute decision-making technique pp. 90-103

Prasanta Kumar Dey

Two-echelon supply chain models: Considering duopolistic retailers' different competitive behaviors pp. 104-116

Shan-Lin Yang and Yong-Wu Zhou

Optimization-based decision support for order promising in supply chain networks pp. 117-130

Uday Venkatadri, Ashok Srinivasan, Benoit Montreuil and Ashish Saraswat

Implementation of Deming's style of quality management: An action research study in a plastics company pp. 131-148

Douglas N. Hales and Satya S. Chakravorty

So many factors, so little time...Simulation experiments in the frequency domain pp. 149-165

Susan M. Sanchez, Farhad Moeeni and Paul J. Sanchez

Disruption management for machine scheduling: The case of SPT schedules pp. 166-184

Xiangtong Qi, Jonathan F. Bard and Gang Yu

Mixed-variable fuzzy clustering approach to part family and machine cell formation for GT applications pp. 185-198

Miin-Shen Yang, Wen-Liang Hung and Fu-Chou Cheng

Joint economic procurement--production-delivery policy for multiple items in a single-manufacturer, multiple-retailer system pp. 199-208

Taebok Kim, Yushin Hong and Soo Young Chang

Integrating direct and indirect sales channels under decentralized decision-making pp. 209-229

Ralf W. Seifert, Ulrich W. Thonemann and Marcel A. Sieke

An algorithm for minimizing weighted earliness penalty in assembly job shops pp. 230-245

Supachai Pathumnakul and Pius J. Egbelu

On optimal payment time for a retailer under permitted delay of payment by the wholesaler pp. 246-251

Xiping Song and Xiaoqiang Cai

Activity-based costing as a method for assessing the economics of modularization--A case study and beyond pp. 252-270

Jesper Thyssen, Poul Israelsen and Brian Jorgensen

Models for production planning under uncertainty: A review pp. 271-285

J. Mula, R. Poler, J.P. Garcia-Sabater and F.C. Lario

Product development practices and performance: A structural equation modeling-based multi-group analysis pp. 286-307

Xenophon Koufteros and George A. Marcoulides

Equipment management strategy under machine capacity loss pp. 308-315

D. Daniel Sheu and Jeff Lin

Synchronization in common cycle lot size scheduling for a multi-product serial supply chain pp. 316-331

M.A. Hoque and B.G. Kingsman

A DSS approach to managing customer enquiries for SMEs at the customer enquiry stage pp. 332-346

M.H. Xiong, S.B. Tor, Rohit Bhatnagar, L.P. Khoo and S. Venkat

A coordination mechanism for a supply chain with demand information updating pp. 347-361

Haoya Chen, Jian Chen and Chen, Youhua (Frank)

Two-warehouse partial backlogging inventory models for deteriorating items under inflation pp. 362-370

Hui-Ling Yang

Raw material release time control for complex make-to-order products with stochastic processing times pp. 371-385

Dong-Ping Song

Two-machine flowshop scheduling problem to minimize total completion time with bounded setup and processing times pp. 386-400

Ali Allahverdi

Demand forecast accuracy and performance of inventory policies under multi-level rolling schedule environments pp. 401-419

Jully Jeunet

The impact of information sharing and forecasting in capacitated industrial supply chains: A case study pp. 420-437

P.J. Byrne and Cathal Heavey

Industry evidence of enhanced production stability since 1984 pp. 438-448

David Bivin

Note on: Concurrent pricing and lot sizing for make-to-order contract production pp. 449-450

Leopoldo Eduardo Cárdenas-Barrón