International Journal of Production Economics
1991 - 2025
Continuation of Engineering Costs and Production Economics. Current editor(s): Stefan Minner From Elsevier Bibliographic data for series maintained by Catherine Liu (). Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.
Volume 177, issue C, 2016
- The value of partnership under competition: When competitors may be R&D joint-venture and supply-chain partners for a critical component pp. 1-11

- Hubert Pun and Salar Ghamat
- The impact of justice on collaborative and opportunistic behaviors in supply chain relationships pp. 12-23

- Baofeng Huo, Zhiqiang Wang and Yu Tian
- Distributions of forecasting errors of forecast combinations: Implications for inventory management pp. 24-33

- Devon K. Barrow and Nikolaos Kourentzes
- Optimal ordering policy in a two-stage supply chain with advance payment for stable supply capacity pp. 34-43

- Qinhong Zhang, Dali Zhang, Yu-Chung Tsao and Jianwen Luo
- Peak power demand reduction for combined manufacturing and HVAC system considering heat transfer characteristics pp. 44-52

- Fadwa Dababneh, Lin Li and Zeyi Sun
- An empirically-simulated investigation of the impact of demand forecasting on the bullwhip effect: Evidence from U.S. auto industry pp. 53-65

- Chung-Yean Chiang, Winston T. Lin and Nallan C. Suresh
- Quantitative insights into the integrated supply vehicle routing and production planning problem pp. 66-76

- Fanny Hein and Christian Almeder
- Corporate credit-risk evaluation system: Integrating explicit and implicit financial performances pp. 77-100

- Faming Zhang, Pandu R. Tadikamalla and Jennifer Shang
- Matching tactical sourcing levers with the Kraljič matrix: Empirical evidence on purchasing portfolios pp. 101-117

- Frank Henrik Hesping and Holger Schiele
- Impact of inventory inaccuracies on products with inventory-dependent demand pp. 118-130

- Fuqiang Wang, Xiaoping Fang, Xiaohong Chen and Xihua Li
- The impact of strategic alignment and responsiveness to market on manufacturing firm's performance pp. 131-138

- Deepak Sardana, Mile Terziovski and Narain Gupta
- Forecasting supply chain sporadic demand with nearest neighbor approaches pp. 139-148

- Konstantinos Nikolopoulos, M. Zied Babai and Konstantinos Bozos
- Traceability and reputation in supply chains pp. 149-162

- Alexander Saak
Volume 176, issue C, 2016
- Integrated production and job delivery scheduling with an availability constraint pp. 1-6

- Peihai Liu and Xiwen Lu
- Optimization of drayage operations with time-window constraints pp. 7-20

- Samaneh Shiri and Nathan Huynh
- Manufacturer-remanufacturing vs supplier-remanufacturing in a closed-loop supply chain pp. 21-28

- Yu Xiong, Quanwu Zhao and Yu Zhou
- The effect of risk aversion on distribution channel contracts: Implications for return policies pp. 29-40

- Shota Ohmura and Hirofumi Matsuo
- Two-echelon pharmaceutical reverse supply chain coordination with customers incentives pp. 41-52

- Dua Weraikat, Masoumeh Kazemi Zanjani and Nadia Lehoux
- Implementation of lean production in multinational corporations: A case study of the transfer process from headquarters to subsidiaries pp. 53-68

- Stefania Boscari, Pamela Danese and Pietro Romano
- The impact of organizational culture on Concurrent Engineering, Design-for-Safety, and product safety performance pp. 69-81

- Andy Yunlong Zhu, Maximilian von Zedtwitz, Dimitris Assimakopoulos and Kiran Fernandes
- Risk, risk aversion, and a finance-augmented neoclassical economic model of production pp. 82-91

- Yi Jin and Zhixiong Zeng
- Two-product storage-capacitated inventory systems: A technical note pp. 92-97

- Bart Beemsterboer, Ruud Teunter and Jan Riezebos
- Big data analytics in logistics and supply chain management: Certain investigations for research and applications pp. 98-110

- Gang Wang, Angappa Gunasekaran, Eric W.T. Ngai and Thanos Papadopoulos
- Linking operations, marketing and environmental capabilities and diversification to hotel performance: A data envelopment analysis approach pp. 111-122

- Ramakrishnan Ramanathan, Usha Ramanathan and Yubo Zhang
- Multi-product inventory model for cold items with cost and emission consideration pp. 123-142

- Ali Bozorgi
- A dual-objective metaheuristic approach to solve practical pollution routing problem pp. 143-153

- Yoshinori Suzuki
- Impact of trade credit and inflation on retailer's ordering policies for non-instantaneous deteriorating items in a two-warehouse environment pp. 154-169

- Sunil Tiwari, Leopoldo Eduardo Cárdenas-Barrón, Aditi Khanna and Chandra K. Jaggi
- A joint economic lot size model with financial collaboration and uncertain investment opportunity pp. 170-182

- B. Marchi, J.M. Ries, S. Zanoni and C.H. Glock
Volume 175, issue C, 2016
- Scheduling with processing set restrictions: A literature update pp. 1-11

- Joseph Y.-T. Leung and Chung-Lun Li
- Improving logistics outsourcing performance through transactional and relational mechanisms under transaction uncertainties: Evidence from China pp. 12-23

- Qian Yang, Xiande Zhao, Hoi Yan Jeff Yeung and Yanping Liu
- Environmental management practices and firm financial performance: The moderating effect of industry pollution-related factors pp. 24-34

- Marilyn T. Lucas and Thomas G. Noordewier
- Closed-loop supply chains: What reverse logistics factors influence performance? pp. 35-49

- Salvatore Cannella, Manfredi Bruccoleri and Jose M. Framinan
- The optimal decision of customer order decoupling point for order insertion scheduling in logistics service supply chain pp. 50-60

- Weihua Liu, Zhicheng Liang, Zi Ye and Liang Liu
- Toward valuable prediction of ERP diffusion in North American automotive industry: A simulation based approach pp. 61-70

- Adnène Hajji, Robert Pellerin, Ali Gharbi, Pierre Majorique Léger and Gilbert Babin
- Organizational structure of a global supply chain in the presence of a gray market: Information asymmetry and valuation difference pp. 71-80

- Bosung Kim and Kun Soo Park
- Transparency of risk for global and complex network decisions in the automotive industry pp. 81-95

- Marius Häntsch and Arnd Huchzermeier
- Reverse logistics in Malaysia: The Contingent role of institutional pressure pp. 96-108

- Kuan Siew Khor, Zulkifli Mohamed Udin, Thurasamy Ramayah and Benjamin T. Hazen
- Transportation service sharing and replenishment/delivery scheduling in Supply Hub in Industrial Park (SHIP) pp. 109-120

- Xuan Qiu and George Q. Huang
- Dynamic capacity management with uncertain demand and dynamic price pp. 121-131

- Xiaoqin Wen, Chen Xu and Qiying Hu
- Optimizing inventory׳s contribution to profitability in a regulated utility: The Averch–Johnson effect pp. 132-141

- Linda Li, David Miller and Charles P. Schmidt
- A genetic algorithm for a joint replenishment problem with resource and shipment constraints and defective items pp. 142-152

- P. Ongkunaruk, M.I.M. Wahab and Y. Chen
- Proactive cost-effective identification and mitigation of supply delay risks in a low volume high value supply chain using fault-tree analysis pp. 153-163

- Michael D. Sherwin, Hugh Medal and Steven A. Lapp
- The SA8000 social certification standard: Literature review and theory-based research agenda pp. 164-181

- Marco Sartor, Guido Orzes, Carmela Di Mauro, Maling Ebrahimpour and Guido Nassimbeni
- Towards a theory for lean implementation in supply networks pp. 182-196

- Thomas Bortolotti, Pietro Romano, Pedro José Martínez-Jurado and José Moyano-Fuentes
- A hierarchical pricing decision process on a dual-channel problem with one manufacturer and one retailer pp. 197-212

- Qing Ding, Ciwei Dong and Zhicong Pan
- Families of supply chain coordinating contracts in the presence of retailer effort pp. 213-225

- Xinghao Yan and Gregory S. Zaric
Volume 174, issue C, 2016
- Optimization of closed-loop supply chain of multi-items with returned subassemblies pp. 1-10

- Nail Tahirov, Parviz Hasanov and Mohamad Y. Jaber
- Optimal location, capacity and timing of stockpiles for improved hurricane preparedness pp. 11-28

- Jomon Aliyas Paul and Leo MacDonald
- Economic design of multivariate Bayesian control chart with two sampling intervals pp. 29-42

- Farnoosh Naderkhani and Viliam Makis
- On the integration of input and output control: Workload Control order release pp. 43-53

- Matthias Thürer, Mark Stevenson and Martin J. Land
- Line feeding optimization for Just in Time assembly lines: An application to the automotive industry pp. 54-67

- Mustapha Sali and Evren Sahin
- Effects of organizational learning on process technology and operations performance in mass customizers pp. 68-75

- Edward Aihua Fang, Xiaoyi Li and Jiajun Lu
- Crop-related harvesting and processing planning: a review pp. 76-92

- Ratih Kusumastuti, Dirk Pieter van Donk and Ruud Teunter
- An effective hybrid genetic algorithm and tabu search for flexible job shop scheduling problem pp. 93-110

- Xinyu Li and Liang Gao
- Simultaneous product family and supply chain design: An optimization approach pp. 111-118

- Bertrand Baud-Lavigne, Bruno Agard and Bernard Penz
- Multi-period inventory games with information update pp. 119-127

- Jian Zhang, Juliang Zhang and Guowei Hua
- Combining SCOR® model and fuzzy TOPSIS for supplier evaluation and management pp. 128-141

- Francisco Rodrigues Lima-Junior and Luiz Cesar Ribeiro Carpinetti
- Innovation-oriented supply chain integration for combined competitiveness and firm performance pp. 142-155

- Peirchyi Lii and Fang-I Kuo
- Using an agent-based neural-network computational model to improve product routing in a logistics facility pp. 156-167

- Till Becker, Christoph Illigen, Bill McKelvey, Michael Hülsmann and Katja Windt
| |