International Journal of Productivity and Quality Management

2006 - 2025

From Inderscience Enterprises Ltd
Bibliographic data for series maintained by Sarah Parker ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 14, issue 4, 2014

Statistical design of X charts for autocorrelated processes for different sample sizes pp. 387-407

D.R. Prajapati and Sukhraj Singh

Identification of manufacturing defects leading to rejection during manufacturing of stabiliser bar pp. 408-422

P.S. Chauhan and C.M. Agrawal

The impact of bugs reported from operational phase on successive software releases pp. 423-440

Amir H.S. Garmabaki, P.K. Kapur, Anu G. Aggarwal and V.S.S. Yadavali

Quality management and innovation: a review of quantitative studies pp. 441-456

Cesare Riillo

Comparative analysis of challenges of selection and recruitment system in two private and public sectors of Iran's petrochemical industry pp. 457-471

Hadi Teimouri and Kouroush Jenab

Exploring antecedents of online banking customers and empirical validation pp. 472-491

Vijaya Kameswari Allada, Rameshwar Dubey and Sonal Agarwal

A QFD-ANP methodology for supplier selection under perspective of requirements in automotive industry pp. 492-517

Abbas Keramati, Neda Ahmadizadeh-Tourzani, Salman Nazari-Shirkouhi, Ebrahim Sharifi Teshnizi and Behzad Ashjari

Volume 14, issue 3, 2014

Integration of QFD and AHP with TPM: an implementation study in an automotive accessories manufacturing company pp. 263-295

C. Sugumaran, S. Muthu, S.R. Devadasan, K. Srinivasan, N.M. Sivaram and N. Rupavathi

Failure mode and effect analysis using fuzzy analytic hierarchy process pp. 296-313

M. Ilangkumaran, P. Shanmugam, G. Sakthivel and K. Visagavel

Dynamic model for the economical evaluation of different technical solutions for reducing naval emissions pp. 314-335

Valentina Ciatteo, Giancarlo Giacchetta and Barbara Marchetti

Estimating the change point of binary profiles in phase II pp. 336-351

Alireza Sharafi, Majid Aminnayeri and Amirhossein Amiri

Economic design of X control chart using genetic algorithm and simulated annealing algorithm pp. 352-372

Ineen Sultana, Imtiaz Ahmed, Abdul Hannan Chowdhury and Sanjoy Kumar Paul

Measurement system analysis for implementing design for Six Sigma pp. 373-386

Ashok Sarkar, Arup Ranjan Mukhopadhyay and Sadhan Kumar Ghosh

Volume 14, issue 2, 2014

A comparison between time-driven activity-based costing and value stream accounting in a lean Six Sigma manufacturing case study pp. 131-148

Andrea Chiarini

Contribution of lean and Six Sigma to effective cost of quality management pp. 149-165

S.M. Mehdi Jourabchi, Tina Arabian, Z. Leman and Md. Yusof B. Ismail

A new mathematical model for locating distribution centres for attracting more retailers pp. 166-178

S. Behrooz Emami, M. Ghandehari and S. Mojtaba Sajadi

Role of CI enablers for improving the performance of manufacturing industry of Northern India pp. 179-195

Jagdeep Singh and Harwinder Singh

Impact of ERP implementation on supply chain performance pp. 196-227

S.C. Lenny Koh, K. Ganesh, Vishesh Pratik and S.P. Anbuudayasankar

Developing robust design: determining critical limits for signal-to-noise ratio based on process capability index pp. 228-246

Arash Shahin and Arash Geramian

Monitoring correlated variable and attribute quality characteristics based on NORTA inverse technique pp. 247-262

Mohammad Hadi Doroudyan and Amirhossein Amiri

Volume 14, issue 1, 2014

Food safety in India: a case of Deli Processed Food Products Ltd pp. 1-20

Rajneesh Mahajan, Suresh Garg and P.B. Sharma

Obsolescence management in rail signalling systems: concept and Markovian modelling pp. 21-35

Kouroush Jenab, Kourosh Noori and Philip D. Weinsier

Performance enhancement of a manufacturing industry by using continuous improvement strategies - a case study pp. 36-65

Jagdeep Singh and Harwinder Singh

Identification of critical success factors for quality-productivity management approach in different industries pp. 66-106

Vinod S. Gorantiwar and R.L. Shrivastava

Multi-objective optimisation of machining parameters in wire electrical discharge machine using non-dominating sorting genetic algorithm pp. 107-129

P.C. Padhi, S.S. Mahapatra, S.N. Yadav and D.K. Tripathy

Volume 13, issue 4, 2014

Do green information systems impact performance? pp. 377-394

Vikram S. Bhadauria, Lisa Toms, Kenneth W. Green Jr. and Jeramy Meacham

Performance evaluation of production companies using data envelopment analysis and Monte Carlo simulation: a case study pp. 395-413

Hesam Soroush and Hadi Shirouyehzad

Integrated application of TRIZ with lean in the manufacturing process in a machine shop for the productivity improvement pp. 414-429

V.R. Muruganantham, P. Navaneetha Krishnan and K.K. Arun

Optimisation of percent dilution and HAZ width of submerged arc weldment using Taguchi philosophy coupled with fuzzy inference system pp. 430-449

Saurav Datta, Ranjeet Kumar Sahu, Siba Sankar Mahapatra, Ajay Biswas and Gautam Majumdar

Decision making in maintenance using analytical hierarchy process and time-driven activity based costing pp. 450-470

Anwar Meddaoui and Driss Bouami

Evaluating green manufacturing drivers: an interpretive structural modelling approach pp. 471-494

Minhaj Ahemad A. Rehman, R.R. Shrivastava and Rakesh L. Shrivastava

Total quality management intensity and its impact on HRM practices in manufacturing firms pp. 495-512

Eyad M. Youssef, Mohamed A. Youssef and Abdel Moneim M.B. Ahmed

Volume 13, issue 3, 2014

Impact of test effort in software development life cycle for effective defect management pp. 251-271

V. Suma and T.R. Gopalakrishnan Nair

A multistage methodology catering to different failure modes for estimating the failure intensity of software: an empirical study pp. 272-288

A. Subash Babu, N. Nalnikar, Ateekh Ur Rehman and Mohamed Abdel Fattah Sharaf

Technical and economic analysis of different cogeneration systems for energy production from biomass pp. 289-309

Giancarlo Giacchetta, Mariella Leporini and Barbara Marchetti

Exploring the application of quality improvement programmes and ISO standards in the Indian marble mining sector pp. 310-328

Mitul Devpura, Jose Arturo Garza-Reyes, Vikas Kumar, Luis Rocha-Lona and Horacio Soriano-Meier

Endogeneity and dynamics of innovation and firm performance pp. 329-348

Anup M. Nandialath, Ramesh Mohan and Madan Annavarjula

Considering BPR and CE for faster product delivery: a case study in manufacturing firms pp. 349-375

Alemu Moges Belay, Petri Helo, Josu Takala and Torgeir Welo

Volume 13, issue 2, 2014

Assessing the quality of patient care: a normative decision view pp. 125-141

Kanwal Nasim, Shahab Alam Malik, Muhammad Zahid Iqbal and Shujah Alam Malik

Investigating the total quality elements based on Deming management model in oil industry in Libya - an empirical study pp. 142-156

Redha M. Elhuni and M. Munir Ahmad

Service quality-based distributor selection problem: a hybrid approach using fuzzy ART and AHP-FTOPSIS pp. 157-177

Mazaher Ghorbani, S. Mohammad Arabzad and Reza Tavakkoli-Moghaddam

A computer-based total productive maintenance model for electric motors pp. 178-200

Aruna Muniswamy, Bhaskaran Gopalakrishnan, Subodh Chaudhari, Majid Jaridi, Ed Crowe and Deepak Gupta

Integrating Kansei engineering and revised Kano model with a case study in the automobile industry pp. 201-218

Arash Shahin, Mohammad Hossein Moshref Javadi and Hossein Vaez Shahrestani

Influences of TPM, TQM, Six Sigma practices on firms performance in Jordan pp. 219-234

Abbas Al-Refaie and Bassel Hanayneh

Effect of warning limits on the performance of the X chart under autocorrelation pp. 235-250

Sukhraj Singh and D.R. Prajapati

Volume 13, issue 1, 2014

Developing technical competency model to promote HRM in project-oriented organisations: a case for 3D petroleum system modelling in the Persian Gulf and Oman Sea (PEARL programme) pp. 1-18

Gholam Reza Asili, S. Saleh Hendi, Seyed Ali Moallemi, Rahman Soofifard, Mohammad Reza Kamali, Saeed Shavvalpour and Mohammad Mehdi Vahabi

Study and analysis of implementation of Six-Sigma: a case study of an automobile industry pp. 19-38

N. Venkatesh, M.C. Gowrishankar and C. Sumangala

Using data envelopment analysis to investigate the efficiency of resource utilisation and to develop an improvement plan pp. 39-66

Abdorrahman Haeri and Kamran Rezaie

A modified range (R) chart to monitor process dispersion of autocorrelated data pp. 67-88

Sukhraj Singh and D.R. Prajapati

Efficiency analysis and optimisation of a multi-product assembly line using simulation pp. 89-104

Hesam Soroush, Seyed Mojtaba Sajjadi and S. Mohammad Arabzad

Review of quality management system research in construction industry pp. 105-123

Tiong Kung Leong, Norhayati Zakuan and Muhamad Zameri Mat Saman