International Journal of Productivity and Quality Management

2006 - 2025

From Inderscience Enterprises Ltd
Bibliographic data for series maintained by Sarah Parker ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 24, issue 4, 2018

Improving conformance to quality requirements in making hot metal pp. 441-459

Arup Ranjan Mukhopadhyay and Jit Kumar Mitra

Non-conformity recovery and safe disposal by Poka Yoke and hallmarking in a piston unit pp. 460-474

G. Sundaramali, S. Abinav Shankar and M. Manoj Kummar

Advances in solution methods for optimisation of multiple quality characteristics in manufacturing processes pp. 475-494

Sasadhar Bera and Indrajit Mukherjee

Increasing energy productivity in lean production system with energy oriented value-stream mapping pp. 495-506

Javad Rezaeian, Irandokht Parviziomran and Iraj Mahdavi

Productivity improvement by line balancing and process modification keeping quality intact pp. 507-519

K. Janardhan Reddy, G. Mahendra Reddy and Nadimpalli Raghukiran

Enhanced biogas production from poultry litter by improving the carbon nitrogen ratio pp. 520-530

Selvaraj Balaji, M. Sakthivel, S.A. Pasupathy, P. Sivakumar and K.K. Arun

Determinants of performance of Tunisia insurance companies: case of life insurance pp. 531-542

Abdelkader Derbali and Lamia Jamel

Banking service quality provided by commercial banks and customer satisfaction. A structural equation modelling approaches pp. 543-565

Main Naser Alolayyan, Sulieman Ibraheem Shelash Al-Hawary, Anber Abraheem Shlash Mohammad and Bahaà Abdul-Hafez Attallah Al-Nady

Supply chain management in developing countries: empirical evidence from Vietnamese manufacturing companies pp. 566-584

Minh Hue Nguyen, Anh Chi Phan and Yoshiki Matsui

Volume 24, issue 3, 2018

Prioritising different branches of Meli Bank based on motivation creating factors organised by gap analysis approach and multi criteria decision making - case study: Meli Bank's branches in Najafabad City pp. 301-322

Monir Al-sadat Mousavi Nejad, Farimah Mokhatab-Rafiei and Hadi Shirouyehzad

An experimental investigation on strain controlled fatigue behaviour of FDM build parts pp. 323-345

Swayam Bikash Mishra and Siba Sankar Mahapatra

Implementation performance of agile manufacturing: a graph theoretic approach pp. 346-372

Pavan Kumar Potdar, Srikanta Routroy and Astajyoti Behera

A proposed model for leadership styles effect on total quality management implementation: an applied study on telecommunication for mobile service companies in Egypt pp. 373-397

Amal Farouk Soliman

Application of failure mode and effect analysis in manufacturing industry - an integrated approach with FAHP-fuzzy TOPSIS and FAHP-fuzzy VIKOR pp. 398-423

G. Sakthivel, D. Saravanakumar and T. Muthuramalingam

Integration of lean, Six Sigma and theory of constraints for productivity improvement of mining industry pp. 424-440

J. Rajini, Dega Nagaraju and S. Narayanan

Volume 24, issue 2, 2018

Study of relationship between cost overrun and labour productivity in road construction projects pp. 143-164

Ibrahim Mahamid

Statistical process control and quality of service at seaports pp. 165-176

à ñigo L. Ansorena

Operational attributes influencing productivity in Indian opencast mines pp. 177-195

Padma Charan Mishra, Manoj Kumar Mohanty and Manmohan Mall

Modelling and analysis of assembly clearance by size and form tolerances in selective assembly using clustering algorithm pp. 196-218

S.V. Chaitanya and A.K. Jeevanantham

Hybrid fuzzy MCDM model for effective utilisation of quality cost analysis in manufacturing firms pp. 219-241

A. Sailaja, P.C. Basak and K.G. Viswanadhan

Overcoming of low discharge problem in shallow well jet pump through the application of total quality function deployment pp. 242-266

K. Sivasamy, C. Arumugam, S.R. Devadasan, R. Murugesh, K.K. Arun and K.M. Senthilkumar

The impact of total productive maintenance on key performance indicators (PQCDSM): a case study of automobile manufacturing sector pp. 267-283

Richa Sharma, Jagtar Singh and Vikas Rastogi

Root cause analysis in quality problem solving of research information systems: a case study pp. 284-299

Mohammad Javad Ershadi, Roozbeh Aiasi and Shirin Kazemi

Volume 24, issue 1, 2018

Developing a quality improvement plan for a small engineering firm in the USA with Six Sigma methodologies pp. 1-11

Jordan Belcher, Evea Kaldas, Virginia Beth Ellington and Dinesh S. Davè

Cost reduction by value stream mapping using Lean-Kaizen concept: a case study pp. 12-32

Sunil Kumar, Ashwani Kumar Dhingra and Bhim Singh

Analytical hierarchy process for selecting best attributes for successful 5S implementation pp. 33-58

Jugraj Singh Randhawa and Inderpreet Singh Ahuja

Supplier selection model using QFD-ANP methodology under fuzzy multi-criteria environment pp. 59-83

Neda Ahmadizadeh-Tourzani, Abbas Keramati and Arash Apornak

Supplier selection and evaluation using QFD and ELECTRE in quality management system environment (case study: Faravari % Sakht Company) pp. 84-100

Mitra Abbaszadeh Tavassoli, Soroush Avakh Darestani and Sara Abbaszadeh Tavassoli

An evaluation of effectiveness of 5S implementation initiatives in an Indian manufacturing enterprise pp. 101-133

Jugraj Singh Randhawa and Inderpreet Singh Ahuja

The effect of in-service training on employees' productivity in education and training organisation, Shiraz, Iran pp. 134-142

Seyedeh Hashemiyeh Mirrezaei, Abdolhossein Ayoubi, Ali Mosallanejad and Fatemehsadat Mousavifard

Volume 23, issue 4, 2018

Social implications of leagile manufacturing system: TISM approach pp. 423-445

Naveen Virmani, Rajeev Saha and Rajeshwar Sahai

Analysis of axioms and assumptions of data envelopment analysis: application for efficiency measurement in project management contexts pp. 446-472

Pooria Niknazar and Mario Bourgault

Justification of advanced manufacturing technologies for small and medium enterprises from auto component sector: AHP approach pp. 473-491

Dimple Bhandari, Rajesh Kr Singh and S.K. Garg

Study on the relationship between supply chain quality management practices and performance in the Iranian automotive industry pp. 492-523

Mehdi Nosratpour, Ali Nazeri and Rahman Soofifard

Process improvement in an Indian automotive part manufacturing company: a case study pp. 524-551

M.L. Meena, R. Jain, P. Kumar, S. Gupta and G.S. Dangayach

Volume 23, issue 3, 2018

An empirical study on factors influencing technology transfer using structural equation modelling pp. 273-288

Mehri Chehrehpak, Alireza Alizadeh and Salman Nazari-Shirkouhi

The effect of business intelligence adoption on agile supply chain performance pp. 289-306

Javad Khazaei Pool, Hadi Balouei Jamkhaneh, Reihaneh Alsadat Tabaeeian, Hoda Tavakoli and Amir Shahin

Effect of organisational culture and organisational learning on organisational innovation: an empirical investigation pp. 307-327

Ali Rezaei, Sayyed Mohsen Allameh and Reza Ansari

Challenges in technology adoption in Indian public distribution system: a quality management approach pp. 328-348

Varun Chhabra, Shweta Chopra and Prashant Rajan

Analysing of customer feedback on critical quality parameters to improve productivity in manufacturing - a case study pp. 349-368

I.S. Stephan Thangaiah, Vinay Sharma and Vembar Nainar Sundharam

Drivers of hospital safety culture quality in emerging economies: the case of Saudi Arabia pp. 369-384

Mario Ferrer, Ricardo Santa, Anita Medhekar, Erick Calvo and Lina Paola Molina-Sánchez

Leagile manufacturing: a review paper pp. 385-421

Naveen Virmani, Rajeev Saha and Rajeshwar Sahai

Volume 23, issue 2, 2018

Performance evaluation of the public transportation system in Esfahan Steel Company from the production line employees' perspective with data envelopment analysis approach pp. 137-162

Parisa Pendar, Farimah Mokhatab-Rafiei and Seyed Akbar Nilipour-Tabatabaei

The relation between the traditional quality and the change of organisational culture using as methodology the quality control circle pp. 163-186

Kelly Nemer and Raimundo Kennedy Vieira

Identification and ranking of enablers of green lean Six Sigma implementation using AHP pp. 187-217

Harsha Pandey, Dixit Garg and Sunil Luthra

An integrated management system: from various aspects of the literature to a maturity model based on the process approach pp. 218-246

Mariyam Moumen and Houda Elaoufir

The effects of positive organisational behaviour on entrepreneurial personality and innovation pp. 247-272

Fazel Larijani and Nahid Saravi-Moghadam

Volume 23, issue 1, 2018

Soft total quality management and lean manufacturing initiatives: model development through structural equation modelling pp. 1-30

Amjad Khalili, Md Yusof Ismail, A.N.M. Karim and Mohd Radzi Che Daud

Development and validation of multi-dimensional wind turbine service quality scale for measuring operations and maintenance service quality in wind energy sector pp. 31-54

G. Arun Jernick, L. Suganthi and S. Iniyan

Understanding nature of empathy through the lens of service encounter: a phenomenological study on FLE's pp. 55-73

Michael Sony, Nandakumar Mekoth and K.K. Therisa

TQM as business strategy: a meta-analysis review pp. 74-89

Anupama Prashar

The evaluation of green manufacturing strategies adopted by ISO 14001 certificate holders in Jordan pp. 90-109

Yazan Khalid Abed-Allah Migdadi and Dua'a Samih Ibrahim Elzzqaibeh

Quality and productivity improvement through spot welding process optimisation in automobile body shop pp. 110-127

G. Selvam, S. Arockia Doss Prince, V. Surya Prakash and T. Rohit

The impact of 2008 credit crisis on currency stability structure pp. 128-136

Shamshuritawati Sharif, Suzilah Ismail and Zurni Omar