International Journal of Productivity and Quality Management

2006 - 2025

From Inderscience Enterprises Ltd
Bibliographic data for series maintained by Sarah Parker ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 29, issue 4, 2020

Enhancement of the competitiveness and the financial capability of a manufacturing process through a new value stream mapping approach pp. 439-453

Mohyiddine Soltani, Hichem Aouag and Mohammed Djamel Mouss

Personal values, cultural competence, self-confidence: comparation among Korean, Japanese, Chinese, and Indonesian employee pp. 454-462

Rusman Frendika, Sri Suwarsi and Dudung Abdurrahman

Productivity enhancement of assembly line by using Maynard operation sequence technique after identification of lean wastages pp. 463-482

Raj Kumar, Parveen Kalra and Suman Kant

Integrating Kano's model into quality function deployment to facilitate decision analysis: a case study at a medium enterprise of export garment manufacturer in Bali pp. 483-501

Elia Oey and Eunike Gabriella

Optimal maritime transportation and ocean shipping transaction for containerised goods among BRICS countries pp. 502-517

Pravendra Tyagi and Gopal Agarwal

Performance study of eco-friendly dielectric in EDM of AISI 2507 super duplex steel using Taguchi-fuzzy TOPSIS approach pp. 518-541

V. Srinivas Viswanth, R. Ramanujam and G. Rajyalakshmi

Prevalent general and preventive maintenance practices in Indian process industry pp. 542-557

Amit Chopra, Anish Sachdeva and Arvind Bhardwaj

A hesitant fuzzy model for ranking maintenance strategies in small and medium-sized enterprises pp. 558-592

Mohsen Shafiei Nikabadi and S. Behnam Razavian

Volume 29, issue 3, 2020

The new conceptual model for print management: total production management pp. 285-308

H. Nagaraj Kamath and Lewlyn L.R. Rodrigues

A modified control chart for monitoring non-normal characteristics pp. 309-328

Boby John and S.M. Subhani

Exploring the applicability of SERVPERF model in Indian two-wheeler industry: a CFA approach pp. 329-354

Mohd Nasir and Mohd Adil

TQM implementation challenges: a case study of a building maintenance department of an institution of higher learning pp. 355-371

Mariam Akinlolu, Ruben Ndihokubwayo and Fredrick Simpeh

Relationship between customer collaboration in supply chain management and operational performance of manufacturing companies pp. 372-396

Anh Chi Phan, Ha Thu Nguyen, Khoa Bach Nguyen, Anh Tu Thi Le and Yoshiki Matsui

Modelling the barriers of green supply chain practices in Jordanian firms pp. 397-417

Abbas Al-Refaie, Dina Al-Momani and Rawan Al-Tarawneh

A systematic approach to assess visual inspection tasks: an assembly line case pp. 418-438

Mustafa Can Tuncer, Necmettin Firat Ozkan and Berna Haktanirlar Ulutas

Volume 29, issue 2, 2020

Machine learning techniques applied to US army and navy data pp. 149-166

Jong-Min Kim, Chuwen Li and Il Do Ha

AHP-VIKOR-based methodology for determining maintenance criticality pp. 167-186

Nitin Panwar, Sanjeev Kumar and Rajesh Attri

Evaluation of TPM strategies for manufacturing performance improvement of Indian SMEs for strategic success pp. 187-215

Abhishek Jain, Harwinder Singh and Rajbir Singh Bhatti

Integrity of food supply chain: going beyond food safety and food quality pp. 216-232

Eric Kaiyue Ling and Siti Norida Wahab

Unified process monitoring strategy for a facility engaged in the production of multiple portfolio of products pp. 233-249

Swarnambuj Suman and Anupam Das

Implementation of '6S' practices adapted for an electrical assembly line pp. 250-267

Shaun T. Menezes, Giridhar B. Kamath and H.C. Shiva Prasad

Quality management to facilitate product introduction across borders pp. 268-283

Promporn Wangwacharakul, Martina Berglund and Ulrika Harlin

Volume 29, issue 1, 2020

The relationship between total quality management practices and organisational image in the hospital industry: an empirical examination pp. 1-23

Faisal Babu and Sam Thomas

A study on software quality factors and metrics to enhance software quality assurance pp. 24-44

Nigussu Bitew Kassie and Jagannath Singh

Evaluating bikesharing service quality: a case study for BIXI, Montreal pp. 45-61

Mukesh Verma and Anjali Awasthi

Performance assessment of talent management system via using system dynamic approach and scenario planning (case study: Iran Falat-Qhare Oil Company) pp. 62-93

Abolfazl Lotfi, Aliakbar Hasani and Saeid Aibaghi Esfahani

Modelling the water supply service quality: a case study of the municipal corporation pp. 94-108

Surendra Kansara

Optimisation algorithms for improvement of a multihead weighing process pp. 109-125

Alexander Pulido-Rojano and J. Carlos García-Díaz

Developing a qualitative model of productivity for service companies using fuzzy analytic hierarchy process: a case study pp. 126-147

Milad Akhlaghi Motlagh, Changiz Valmohammadi and Mahmoud Modiri

Volume 28, issue 4, 2019

Extension of the model of manufacturing supply chain quality management: an empirical study pp. 417-437

Arash Apornak and Maryam Amiri Hezaveh

People management for sustainable SMEs pp. 438-456

Sooksan Kantabutra

Exploring the factors to make e-commerce and m-commerce ubiquitous and pervasive to improve national productivity of India pp. 457-496

Sujata P. Deshmukh, Prashant D. Deshmukh, Bhushan T. Patil and G.T. Thampi

Measuring organisational performance using work measurement: towards improving productivity pp. 497-510

Barnes Sookdeo

Dealing with generalised inverse DEA models for input-output estimation pp. 511-521

Mojtaba Ghiyasi

Optimisation of welding fixture layout for sheet metal components using DOE pp. 522-558

K.M. Arunraja, S. Selvakumar and P. Praveen

Volume 28, issue 3, 2019

Broadening the Lean Six Sigma concept through employee adaptability: a literature review pp. 279-298

Michael Sony and Nandakumar Mekoth

Compensation system and job satisfaction: the application of the job descriptive index in the public-sector of Jordan pp. 299-317

Mohammed Rawabdeh and Sahem Nawafleh

An FMEA-based integrated framework to quantify and improve operational performance in advanced manufacturing environments: a case study pp. 318-339

Chen Fung Liew, Joshua Prakash and Kok Seng Ong

Performance benchmarking on export credit agencies: a data envelopment analysis pp. 340-359

Amir Karbassi Yazdi, Yong J. Wang and Mehdi Mohammadi Kahorin

Characteristic evaluation of SkSP-T with special type double sampling plan as reference plan pp. 360-371

K. Pradeepa Veerakumari and S. Suganya

Planning and scheduling problems of production systems: review, classification and opportunities pp. 372-402

Zineb Ibn Majdoub Hassani, Abdellah El Barkany, Abdel Moumen Darcherif, Abdelouahhab Jabri and Ikram El Abbassi

Product quality analysis for multi-processes with multiple quality characteristics using capability indices pp. 403-416

Sujeong Seo and Robert Parody

Volume 28, issue 2, 2019

Evaluating the maturity level of TQM benefits in Pakistan pp. 143-159

Muhammad Arslan

The determinants of women's entrepreneurship development: an empirical study in Tunisia pp. 160-182

Salim Morched and Anis Jarboui

The impact of foreign labour on average real wages of residents: evidence from Malaysia's construction sector pp. 183-209

Atif Awad and Ishak Yussof

The impact of quality management practices, training and employee suggestion schemes on quality performance pp. 210-226

Suhan Sundar and H. Mahesh Prabhu

Risk analysis of CNG dispensing unit by fuzzy digraph matrix and Dempster-Shafer approach pp. 227-255

Priyank Srivastava, Dinesh Khanduja, Subra Ganesan, Mohit Agarwal, Mridul Tulsiyan, Manik Tandon and Sumit Gupta

An AHP-based comparison between automated and manual material handling systems in FMS environment pp. 256-277

Vimlesh Kumar Ojha, Sandhya Dixit and Sanjeev Goyal

Volume 28, issue 1, 2019

Literature review: continuous improvement through Lean Six Sigma pp. 3-27

Yadav Narottam, K. Mathiyazhagan and Krishan Kumar

Inventory reduction using the optimal policy curve approach: a case study pp. 28-39

Omkar Kaushik, Saket Jha, Shikha Kashyap and Ravindra Ojha

A framework for analysis of the supplier selection in green supply chain pp. 40-67

Blanka Tundys, Andrzej Rzeczycki and Yudi Fernando

Optimal autonomous mobile robot motion planning for green logistics pp. 68-89

V. Sathiya and M. Chinnadurai

Qualitative and quantitative analysis of discomfort glare due to artificial indoor lighting pp. 90-102

Deevesh Sharma, Awadhesh Bhardwaj, Monica Sharma and Ashraf Mirza

Determinants of green supply chain practices of manufacturing companies in Sri Lanka pp. 103-127

B.C.P. Jayarathna and C.N. Wickramasinghe

Exploring the relationship between dimensions of quality management practices and business performance pp. 128-142

Deepinder Singh, Harwinder Singh, Jagwinder Singh and Raman Kumar