International Journal of Production Research

1999 - 2025

Current editor(s): Professor A. Dolgui

From Taylor & Francis Journals
Bibliographic data for series maintained by Chris Longhurst ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 62, issue 24, 2024

Using graph neural network to conduct supplier recommendation based on large-scale supply chain pp. 8595-8608

Yuchun Tu, Wenxin Li, Xiao Song, Kaiqi Gong, Lu Liu, Yunhao Qin, Songsong Liu and Ming Liu

Optimizing LPG production under quality specifications by preprocessing MILP with Pareto dominance and DEA pp. 8609-8632

Pavlos Eirinakis, Gregory Koronakos and Stathis Plitsos

Appointment scheduling for logistics parks under truck heterogeneity and order fulfillment delay pp. 8633-8650

Yujiao Sun, Shirui Zeng, Wenhui Zhou, Yangguang Lu and Yuanguang Zhong

Resilience of interdependent supply chain networks design and protection under the ripple effect pp. 8651-8677

Lei Zhang, Xavier Brusset, Yizhong Ma, Fengxia Zhang and Peirui Qiao

Optimisation approaches for organising hospital infrastructure function pp. 8678-8700

Robert L. Burdett, Paul Corry, David Cook and Sean Birgan

A sensor-driven operations and maintenance planning approach for large-scale leased manufacturing systems pp. 8701-8718

Şakir Karakaya, Murat Yildirim, Nagi Gebraeel and Tangbin Xia

Model and heuristics for the multi-manned assembly line worker integration and balancing problem pp. 8719-8744

Adalberto Sato Michels and Alysson M. Costa

Implementing lean management in hospitals: a survey on social and technical outcomes of kaizen initiatives pp. 8745-8765

Pamela Danese, Pietro Romano and Hebert Alonso Medina Suni

Economic modelling and optimisation of SPRT-based quality control schemes for individual observations pp. 8766-8789

Chenglong Li and George Nenes

Optimal predictive selective maintenance for fleets of mission-oriented systems pp. 8790-8817

R. O'Neil, A. Khatab and C. Diallo

The effect of manufacturing overhead on policies for allocating production capacity pp. 8818-8834

Rajesh Srivastava and Elias Kirche

Performance estimation and operating policies in a truck-based autonomous mobile robot delivery system pp. 8835-8857

Yaohan Shen, Bipan Zou, René De Koster and T.C.E. Cheng

Increasing willingness to pay in the food supply chain: a blockchain-oriented trust approach pp. 8858-8879

Xavier Brusset, Aseem Kinra, Hussein Naseraldin and Rami Alkhudary

A systematic strategy for the architecture design of collaborative and reconfigurable assembly lines pp. 8880-8903

Andrea Monguzzi, Andrea Maria Zanchettin and Paolo Rocco

Rescheduling optimisation of sustainable multi-objective fuzzy flexible job shop under uncertain environment pp. 8904-8920

Ziqing Wang, Wenzhu Liao and Yaping Zhang

Design and management of energy-efficient and energy-resilient supply chains pp. 8921-8923

Alexandre Dolgui, Dmitry Ivanov, Alexandra Brintrup, Weiwei Chen, Bin Shen (Jerry) and Sanjoy Kumar Paul

Green supply chain management: a renewable energy planning and dynamic inventory operations for perishable products pp. 8924-8951

Jingsi Huang, Dongwei Xie, Yunzhe Qiu, Jianxiao Wang and Jie Song

Assessing the energy efficiency potential of a closed-loop supply chain for household durable metal products in China pp. 8952-8969

Xuhui Chen, Yong He and Li Zhou

Power production competition under different regulations: a social welfare perspective pp. 8970-8987

Guo Li, Mengqi Liu, Xiaochuan Li and Haifeng Li

A data-driven viable supply network for energy security and economic prosperity pp. 8988-9010

Kwon Gi Mun, Wenbo Cai, Mark Rodgers and Sungyong Choi

Resilient and sustainable energy supply chains: insights on sourcing and pricing strategies in a non-collaborative and collaborative environment pp. 9011-9042

Hamed Rajabzadeh and Marcus Wiens

Volume 62, issue 23, 2024

Transformation of supply chain resilience research through the COVID-19 pandemic pp. 8217-8238

Dmitry Ivanov

Eco-friendly lane reservation-based autonomous truck transportation network design pp. 8239-8259

Ling Xu, Peng Wu, Chengbin Chu and Andrea D'Ariano

An efficient and adaptive design of reinforcement learning environment to solve job shop scheduling problem with soft actor-critic algorithm pp. 8260-8275

Jinghua Si, Xinyu Li, Liang Gao and Peigen Li

Multi-objective optimization of production system with staggered production pp. 8276-8298

Chia-Huang Wu, Dong-Yuh Yang and Chung-Ling Huang

Combinatorial Benders' decomposition for the constrained two-dimensional non-guillotine cutting problem with defects pp. 8299-8325

Shaowen Yao, Hao Zhang, Qiang Liu, Jiewu Leng and Lijun Wei

Triple sampling X̄ control chart for gamma process pp. 8326-8351

Yasar Mahmood, Michael B. C. Khoo, Sin Yin Teh, Sajal Saha and W. L. Teoh

Energy-efficient scheduling for a hybrid flow shop problem while considering multi-renewable energy pp. 8352-8372

Weidong Chen, Junnan Wang and Guanyi Yu

Many-to-many locomotive routing problem for the steel industry pp. 8373-8396

Ohhyun Kweon and Byung-In Kim

Coupling simulation and machine learning for predictive analytics in supply chain management pp. 8397-8414

Tianyuan Zhang, Matthieu Lauras, Gregory Zacharewicz, Souad Rabah and Frederick Benaben

The value of backup supply for mitigating disruption risk with equity finance pp. 8415-8442

Jiajing Li, Shuhua Zhang and Pengwen Hou

L-PBF AM process failures causal chain: an FMEA-based monitoring approach for process control pp. 8443-8461

Nicolas Muller, Yann Quinsat and Christophe Tournier

To allow or not to allow tipping: tipping strategy choice for service platforms under competition pp. 8462-8484

Wenqian Zhang and Haiyan Wang

Mixed-model sequencing with reinsertion of failed vehicles: a case study for automobile industry pp. 8485-8504

I. Ozan Yilmazlar, Mary E. Kurz and Hamed Rahimian

Pixelation of time matrices for solving permutation flowshop scheduling problem pp. 8505-8517

Shahriar Farahmand Rad

Relationship between quality management and organizational performance in the healthcare industry pp. 8518-8536

Heng Xie, Xinyu Wei, Xianghui Peng and Victor Prybutok

Artificial intelligence and prescriptive analytics for supply chain resilience: a systematic literature review and research agenda pp. 8537-8561

Conn Smyth, Denis Dennehy, Samuel Fosso Wamba, Murray Scott and Antoine Harfouche

Current research and future challenges in parcel hub towards logistics 4.0: a systematic literature review from a decision-making perspective pp. 8562-8593

James C. Chen, Dewanti Anggrahini and Tzu-Li Chen

Volume 62, issue 22, 2024

Investments in Industry 4.0 technologies and supply chain finance: approaches, framework and strategies pp. 8049-8055

Angappa Gunasekaran, Sachin Kamble, Abhijeet Ghadge and Vikas Kumar

Financing manufacturers for investing in Industry 4.0 technologies: internal financing vs. External financing pp. 8056-8072

Majid Azadi, Zohreh Moghaddas, Reza Farzipoor Saen and Farookh Khadeer Hussain

Manufacturer’s decision-making model under carbon emission permits repurchase strategy and capital constraints pp. 8073-8091

Yuyan Wang, Lingxue Lv, Liang Shen and Rongyun Tang

Financial performance and supply chain dynamic capabilities: the Moderating Role of Industry 4.0 technologies pp. 8092-8109

Mohammad H. Eslami, Hamid Jafari, Leona Achtenhagen, John Carlbäck and Alex Wong

Evolutionary multiplayer game analysis of accounts receivable financing based on supply chain financing pp. 8110-8128

Bo Yan, Zhuo Chen, Chang Yan, Zhenyu Zhang and Hanwen Kang

A multi-period multi-product stochastic inventory problem with order-based loan* pp. 8129-8142

Zhen Chen and Ren-qian Zhang

Supporting a capital-constrained supplier with mixed pre-shipment financing facilities pp. 8143-8156

Andy Wu

Purchasing from multiple capital-constrained suppliers using order financing pp. 8157-8172

Andy Wu

Investigating the themes in supply chain finance: the emergence of blockchain as a disruptive technology pp. 8173-8192

Berk Kucukaltan, Rifat Kamasak, Baris Yalcinkaya and Zahir Irani

Blockchain adoption in logistics and supply chain: a literature review and research agenda pp. 8193-8216

Serkan Karakas, Avni Zafer Acar and Berk Kucukaltan

Volume 62, issue 21, 2024

A genetic algorithm for fuzzy identical parallel machine scheduling of minimising total weighted tardiness under resource constraint pp. 7619-7643

Kai Li, Liping Xu, Han Zhang and Jianfu Chen

A systematic energy-aware scheduling framework for manufacturing factories integrated with renewables pp. 7644-7659

Zhean Shao, Wen Li, Ying Tan and Kevin Otto

Global multi-sourcing network design with inventory planning under uncertainty pp. 7660-7686

Minke Wang, Mehdi Amiri-Aref, Walid Klibi and M. Zied Babai

Price distortion forced by recycling competition under trade-in collaboration pp. 7687-7703

Bowen Zhao, Wansheng Tang, Liqun Wei and Jianxiong Zhang

An adaptive shuffled frog-leaping algorithm for parallel batch processing machines scheduling with machine eligibility in fabric dyeing process pp. 7704-7721

Deming Lei and Tao Dai

Real-time AGV scheduling optimisation method with deep reinforcement learning for energy-efficiency in the container terminal yard pp. 7722-7742

Lin Gong, Zijie Huang, Xi Xiang and Xin Liu

Federated deep reinforcement learning for dynamic job scheduling in cloud-edge collaborative manufacturing systems pp. 7743-7762

Xiaohan Wang, Lin Zhang, Lihui Wang, Xi Vincent Wang and Yongkui Liu

A multi-skilled staff scheduling and team configuration optimisation model for artificial intelligence project portfolio considering competence development and innovation-driven pp. 7763-7792

Rong Chen, Dongxiao Gu, Changyong Liang and Li Jiang

Fuzzy demand-driven material requirements planning: a comprehensive analysis of fuzzy logic implementation in DDMRP pp. 7793-7811

Ozlem Uzun Araz, Mehmet Ali Ilgin, Ozgur Eski and Ceyhun Araz

Resilience-oriented approach of dynamic production and maintenance scheduling optimisation considering operational uncertainty pp. 7812-7835

Yuqi Cai, Yihai He, Rui Shi, Tianyu Feng and Jiayang Li

Is it beneficial to invest in flexible capacity for hybrid remanufacturing? pp. 7836-7859

David Francas, Miray Öner-Közen and Stefan Minner

Forecasting spare part extractions from returned systems in a closed-loop supply chain pp. 7860-7876

Emna Turki, Oualid Jouini, Zied Jemai, Yazid Traiy, Adnane Lazrak, Patrick Valot and Robert Heidseick

Optimal pricing and capacity management in service systems with delay-sensitive mixed-risk customers pp. 7877-7903

Michalis Deligiannis, Myron Benioudakis, George Liberopoulos and Apostolos Burnetas

Decomposition-based multi-objective approach for a green hybrid flowshop rescheduling problem with consistent sublots pp. 7904-7932

Weiwei Wang, Biao Zhang, Xuchu Jiang, Baoxian Jia, Hongyan Sang and Leilei Meng

Supplier encroachment and pricing scheme choice in a supply chain with two-sided uncertainties pp. 7933-7951

Yi Huang, Wei Xing and Xuan Zhao

A self-adaptive Gaussian mutation-based arithmetic optimiser algorithm for integrated production scheduling and vehicle routing problem in the distributed manufacturing environment pp. 7952-7980

Kaiyuan Zhang and Binghai Zhou

A Benders decomposition algorithm for resource allocation with multi-resource operations pp. 7981-7997

Wuyan Weng, Chengbin Chu and Peng Wu

Towards vaccine lifecycle management (VLM): A systematic literature review of the issues and challenges pp. 7998-8021

Allam Sanae, Sekhari Seklouli Aicha, El Bouzekri El Idrissi Adiba and El Kinani Noredine

A review of digital assistants in production and logistics: applications, benefits, and challenges pp. 8022-8048

Ting Zheng, Eric H. Grosse, Stefan Morana and Christoph H. Glock

Volume 62, issue 20, 2024

Special issue on service-oriented manufacturing supply chain management in Industry 4.0 pp. 7301-7303

Zhong-Zhong Jiang, Hubert Pun, Yeming Gong and Xiaolong Guo

Conditions towards manufacturing upgrading in the era of Industry 4.0 pp. 7304-7323

Jiaguo Liu, Xiaowen Zhao, Jihong Chen and Junjin Wang

Product service supply chain network competition: an equilibrium with multiple tiers and members pp. 7324-7341

Xiaoyang Zhou, Chong Gao and Ding Zhang

Financing a service-oriented manufacturer when facing the risk of bankruptcy pp. 7342-7359

Zhong-Zhong Jiang, Guangqi Feng, Xiaolong Guo, Na He and Di Hu

A new procurement and supply contract for manufacturing technology standards’ diffusion from home to host countries pp. 7360-7381

Qing Zhou, Zhengyi Wu, Wenchong Chen and Wenqing Chen

Optimal homing policy of the manufacturer facing competing platforms: the effect of selling formats pp. 7382-7411

Xujin Pu, Zhenzhen Wang and Wen Zhang

Multi-period distribution network design with boundedly rational customers for the service-oriented manufacturing supply chain: a 4PL perspective pp. 7412-7431

Yuxin Zhang, Zheming Gao, Min Huang, Songchen Jiang, Mingqiang Yin and Shu-Cherng Fang

Smart services and privacy, can we have both? pp. 7432-7446

Sihua Chen, Weidong Wang, Xiang Wen, Han Qiu, Wei He, Mikko Siponen and Xiaoming Zhang

An intelligent matching recommendation algorithm for a manufacturing capacity sharing platform with fairness concerns pp. 7447-7465

Lei Xie, Jianghua Zhang, Qingchun Meng, Yan Jin and Weibo Liu

A variable neighborhood search and mixed-integer programming models for a distributed maintenance service network scheduling problem pp. 7466-7485

Baoyu Liao, Shaojun Lu, Tao Jiang and Xing Zhu

Collaborating product development and maintenance service: quality incentive with inspection and warranty strategies pp. 7486-7503

Zhiping Zhou, Jing Ren, Xinbao Liu and Panos M. Pardalos

Product co-design with consumer participation in a service-oriented manufacturing system pp. 7504-7524

Zerong Lyu, Zhaofu Hong, Yunrong Zhang and Chang Wang

Effects of shared farms on the agricultural supply chain pp. 7525-7539

Wen Diao, Lin Tian and Yifan Xu

Asset-light operation strategy for car-sharing model with vertical shareholding: financial leasing or instalment factoring pp. 7540-7558

Kai Kang, Letian Zhang, Mengyu He and Zhiying Zhang

The role of surcharge policy on a ride-hailing service platform with long-distance drivers pp. 7559-7580

Yuanguang Zhong, Jiazi Yang, Yong-Wu Zhou and Bin Cao

Delivery service for a service-oriented manufacturing supply chain with procurement and delivery time decisions pp. 7581-7597

Zhuolin Yang, Yuting Zheng, Jianbin Li, Stuart X. Zhu and Chao Yang

Coordinated production and delivery scheduling for service-oriented manufacturing systems with deterioration effect pp. 7598-7617

Ting Zhao, Shaojun Lu, Hao Cheng, Mingyu Ren and Xinbao Liu

Volume 62, issue 19, 2024

Model and solution approach to coordinate production-inventory strategies considering nonlinear price-sensitive demand: application to Canadian pulp and paper industry pp. 6903-6932

Elaheh Ghasemi, Nadia Lehoux and Mikael Rönnqvist

Scheduling on parallel dedicated machines with job rejection pp. 6933-6940

Baruch Mor and Gur Mosheiov

Integrated tactical continuous production planning of two blending systems sharing supply sources: the case of a phosphate supply chain pp. 6941-6960

Bassma Azzamouri, Vincent Hovelaque and Vincent Giard

A flexible planning approach for integrated lot sizing and rework planning with random proportion of defective products pp. 6961-6978

Pierre Kohlmann and Florian Sahling

Few-shot learning for defect detection in manufacturing pp. 6979-6998

Patrik Zajec, Jože M. Rožanec, Spyros Theodoropoulos, Mihail Fontul, Erik Koehorst, Blaž Fortuna and Dunja Mladenić

Traditional or drop-shipping? channel choice and product quality pp. 6999-7017

Qingyi Wu, Shuang Xie and Buqing Ma

Recycling and/or reusing: when product innovation meets the recast of WEEE direct pp. 7018-7029

Jiaxin He, Wei Yan, Youwei Li and Danli Lu

A branch-and-price-and-cut algorithm for the unmanned aerial vehicle delivery with battery swapping pp. 7030-7055

Zhi Pei, Wuhao Pan, Kebiao Weng and Tao Fang

Determining the I/O point policy in a robotic live-cube compact storage system pp. 7056-7072

Teh Khai Jen, Rong Wang and Peng Yang

Deep reinforcement learning on variable stiffness compliant control for programming-free robotic assembly in smart manufacturing pp. 7073-7095

Zhenrui Ji, Gang Liu, Wenjun Xu, Bitao Yao, Xuedong Liu and Zude Zhou

A dynamic condition-based maintenance policy for heterogeneous-wearing tools with considering product quality deterioration pp. 7096-7113

Biao Lu and Yumei Luo

Multi-source AdaBoost with cross-weight method for virtual metrology in semiconductor manufacturing pp. 7114-7129

Tianhui Wang, Jaeseung Baek, Myong-Kee Jeong, Seongho Seo and Jaekyung Choi

Autoencoder-based detector for distinguishing process anomaly and sensor failure pp. 7130-7145

Chia-Yen Lee, Kai Chang and Chien Ho

Effect of customer concentration on firms’ operating performance during the COVID-19 pandemic pp. 7146-7166

Young Soo Park, Jaeseog Na and Yun Shin Lee

Unified strategy of production, distribution and pricing in a dual-channel supply chain using leasing option pp. 7167-7185

Ahmed Farouk Hamzaoui, Sadok Turki and Nidhal Rezg

Constructing modified variable neighborhood search approaches to solve a nurse scheduling problem pp. 7186-7204

Ping-Shun Chen, Wen-Tso Huang, Gary Yu-Hsin Chen, Jr-Fong Dang and Erh-Chun Yeh

Financing an online newsvendor with considering the impact of advertising strategy pp. 7205-7225

Gongbing Bi, Yinghui Liu and Pingfan Wang

Consumer service level-oriented resilience optimisation for e-commerce supply chain considering hybrid strategies with blockchain adoption pp. 7226-7260

Wei Pu, Shuang Ma and Xiangbin Yan

Optimal pricing and inventory strategies for leased equipment considering lessees’ options pp. 7261-7278

Yanping Liu, Biyu Liu, Haidong Yang and Kai Luo

Exploring the shortcomings in formal criteria selection for multicriteria decision making based inventory classification models: a systematic review and future directions pp. 7279-7299

Frank Michael Theunissen, Carel Nicolaas Bezuidenhout and Shafiq Alam

Volume 62, issue 18, 2024

Production optimisation in carbon reduction engineering management pp. 6445-6448

Yi-Ming Wei, Zhimin Huang, D’Maris Coffman Dalton, Hua Liao and Ke Wang

A novel carbon reduction engineering method-based deep Q-learning algorithm for energy-efficient scheduling on a single batch-processing machine in semiconductor manufacturing pp. 6449-6472

Min Kong, Weizhong Wang, Muhammet Deveci, Yajing Zhang, Xuzhong Wu and D'Maris Coffman

Two-stage electricity production scheduling with energy storage and dynamic emission modelling pp. 6473-6492

Bi Fan, Fengjie Liao, Chao Yang and Quande Qin

A three-level meta-frontier directional distance function approach for carbon emission efficiency analysis in China: convexity versus non-convexity pp. 6493-6517

Ya Chen, Yongbin Pan, Tao Ding, Huaqing Wu and Guangwei Deng

Optimisation of carbon emission reduction in a competitive market with varying saturation and eco-conscious consumers pp. 6518-6541

Baozhuang Niu, Nan Zhang, Fengfeng Xie and Hailun Zhang

Package-type strategies and packaging's carbon reduction decisions in the take-out industry pp. 6542-6572

Shaofu Du, Minjian Liu, Tengfei Nie and Yangguang Zhu

Sustainable supply chain operations driven by ‘remanufacturing + product sharing’: operation mode selection and decision optimisation pp. 6573-6597

Shuiye Niu, Yujuan Xi and Yongjian Li

Emission abatement in low-carbon supply chains with government subsidy and information asymmetry pp. 6598-6626

Longfei He, Huanhuan Wang and Fangtong Liu

Low-carbon supply chain coordination through dual contracts considering pareto-efficiency pp. 6627-6648

Shuyi Wang, S.H. Choi, Jianhua Xiao and George Q. Huang

The coordination strategies of coal supply chain considering carbon emissions reduction pp. 6649-6664

Lei Cheng, Lu-Tao Zhao, Feng-Rong Li and Ke-Xin Yang

Low-Carbon supply chain optimisation with carbon emission reduction level and warranty period: nash bargaining fairness concern pp. 6665-6687

Shuai Li, Shaojian Qu, M.I.M. Wahab and Ying Ji

Adoption of blockchain considering platform’s information sharing and service effort under the cap-and-trade scheme pp. 6688-6712

Xiaoping Xu, Xinyang Chen, Jiahao Chen, T. C. E. Cheng, Yugang Yu and Samuel Shuai Liu

Analyzing production optimization models across various carbon pricing policies pp. 6713-6731

Chu-Lun Hsieh, Wen-Hsien Tsai and Po-Yuan Chu

Collaborative management of the energy-water-carbon footprint: analysing the spatial network characteristics pp. 6732-6752

Xiuli Liu, Rui Xiong, Sandun C. Perera and Pibin Guo

Joint decisions on selling mode choice and emission reduction investment under cap-and-trade regulation pp. 6753-6780

Qiang Wang, Su Xiu Xu, Xiang Ji and Nenggui Zhao

Low carbon operation optimisation strategies for heating, ventilation and air conditioning systems in office buildings pp. 6781-6800

Meng Shen, Baojun Tang and Keai Zhang

Carbon reduction engineering through value chains intersection, product and process re-design, industrial processes’ scraps de-manufacturing pp. 6801-6822

Federica Cappelletti and Michele Germani

Production and decarbonisation of conventional gasoline vehicle automakers under subsidy and regulation policies pp. 6823-6841

Zhenyang Pi

Bi-objective carbon-efficient distributed flow-shop scheduling with multistep electricity pricing pp. 6842-6858

Xianyu Yu, Hengte Du, Dequn Zhou, Qunwei Wang and Guohui Lin

How will CBAM affect the decarbonisation of steel industry in China? A system dynamics approach pp. 6859-6880

Lu-Tao Zhao, Zhe-Yi Chen, Ya-Xuan Duan and Rui-Xiang Qiu

The newsvendor problem with GHG emissions from waste disposal under cap-and-trade regulation pp. 6881-6901

Jean-Philippe Gayon and Michael Hassoun

Volume 62, issue 17, 2024

Resilience to disruptions: a missing piece of contingency planning in projects pp. 6029-6045

Seyed Ashkan Zarghami

A hybrid LSTM method for forecasting demands of medical items in humanitarian operations pp. 6046-6063

Marwa Hasni, M. Zied Babai and Bahman Rostami-Tabar

Industry 5.0 use cases development framework pp. 6064-6089

Alexandre Goujon, Frédéric Rosin, Florian Magnani, Samir Lamouri, Robert Pellerin and Laurent Joblot

Efficient low-carbon manufacturing for CFRP composite machining based on deep networks pp. 6090-6101

Huang Shunhu, Ma Feng, Gong Qingshan and Zhang Hua

Project acceleration using temporary workers with heterogeneous efficiency: optimal and best recruitment policies pp. 6102-6119

Jully Jeunet

Generative artificial intelligence in supply chain and operations management: a capability-based framework for analysis and implementation pp. 6120-6145

Ilya Jackson, Dmitry Ivanov, Alexandre Dolgui and Jafar Namdar

Mitigating risky sourcing with a responsible supplier in a competitive environment: the implication of product line design and sourcing diversification pp. 6146-6166

Fei Lv and Zhe Yin

The capacity matching problem of the third-party shared manufacturing platform with capacity time windows and order splitting pp. 6167-6185

Xumei Zhang, Duanyang Cao, Bin Dan, Jianfeng Rui and Shengming Zhang

Value co-creation in group enterprises: an evolutionary game theory-based analysis pp. 6186-6210

Runliang Dou, Guofang Nan, Ziqian Wei and Chia-Yu Hsu

Performance of deep reinforcement learning algorithms in two-echelon inventory control systems pp. 6211-6226

Francesco Stranieri, Fabio Stella and Chaaben Kouki

Adaptive population-based simulated annealing for resource constrained job scheduling with uncertainty pp. 6227-6250

Dhananjay Thiruvady, Su Nguyen, Yuan Sun, Fatemeh Shiri, Nayyar Zaidi and Xiaodong Li

Quantitative insights into the integrated push and pull production problem for lean supply chain planning 4.0 pp. 6251-6275

John Reyes, Josefa Mula and Manuel Diaz-Madroñero

Innovative subsidy schemes under a limited budget: how and when do they matter pp. 6276-6291

Wenhui Zhou, Haiping Zhang and Weixiang Huang

A modified memetic algorithm with multi-operation precise joint movement neighbourhood structure for the assembly job shop scheduling problem pp. 6292-6324

Zhiyong Ba, Yiping Yuan and Jinduo Liu

Retailer- vs. Vendor-managed inventory in the presence of consumer response to retail stockouts pp. 6325-6343

Jun Ru

Multi-source adaptive thresholding adaboost with application to virtual metrology pp. 6344-6359

Yifan Xie, Tianhui Wang, Myong K. Jeong and Gyeong Taek Lee

Impact of bot return policies in van-and-bot delivery systems pp. 6360-6379

Mikele Gajda, Nils Boysen and Olivier Gallay

The customer order decoupling point in empirical operations and supply chain management research: a systematic literature review and framework pp. 6380-6399

Magnus Harfeldt-Berg and Jan Olhager

Implementation of digital twins in the food supply chain: a review and conceptual framework pp. 6400-6426

Ying Huang, Abhijeet Ghadge and Nicky Yates

Transient staffing at the beginning of work pp. 6427-6443

Benjamin Legros and Oualid Jouini

Volume 62, issue 16, 2024

Human work in the shift to Industry 4.0: a road map to the management of technological changes in manufacturing pp. 5613-5630

Arto Reiman, Jari Kaivo-oja, Elina Parviainen, Esa-Pekka Takala and Theresa Lauraeus

A surrogate-assisted dual-tree genetic programming framework for dynamic resource constrained multi-project scheduling problem pp. 5631-5653

HaoJie Chen, XinYu Li and Liang Gao

Robust job shop scheduling with machine unavailability due to random breakdowns and condition-based maintenance pp. 5654-5675

Md Hasan Ali, Ahmed Saif and Alireza Ghasemi

ChatGPT and generative artificial intelligence: an exploratory study of key benefits and challenges in operations and supply chain management pp. 5676-5696

Samuel Fosso Wamba, Cameron Guthrie, Maciel M. Queiroz and Stefan Minner

Real-time vehicle relocation and staff rebalancing problem for electric and shared vehicle systems pp. 5697-5719

Ting Wu, Min Xu and Abdelrahman E.E. Eltoukhy

Routing a mixed fleet of electric and conventional vehicles under regulations of carbon emissions pp. 5720-5736

Yuzhuo Qiu, Shu Ding and Panos M. Pardalos

Quantifying organisational resilience: an integrated resource efficiency view pp. 5737-5756

S.C. Lenny Koh, Karthik Suresh, Peter Ralph and Michelle Saccone

Managing inventory in customizable multi-echelon assembly systems pp. 5757-5771

Kartikeya S. Puranam and Kathleen M. Iacocca

A Bayesian sampling framework for constrained optimisation of build layouts in additive manufacturing pp. 5772-5790

Suh In Kim, Kaitlyn Gee and A. John Hart

Modeling help chains in health services as social networks: moving from linearity to complexity pp. 5791-5808

Bruno Miranda dos Santos, Flavio Sanson Fogliatto, Tarcisio Abreu Saurin and Guilherme Luz Tortorella

Energy-efficient production control of a make-to-stock system with buffer- and time-based policies pp. 5809-5827

Barış Tan, Oktay Karabağ and Siamak Khayyati

Examining the dynamics of bargaining power in buyer-supplier negotiations: insights from a case study in the German automotive industry pp. 5828-5849

Frank Bodendorf and Jörg Franke

A cooperative coevolutionary hyper-heuristic approach to solve lot-sizing and job shop scheduling problems using genetic programming pp. 5850-5877

Yannik Zeiträg, José Rui Figueira and Gonçalo Figueira

Strategic network design for recycling of EPS insulation material – insights from a German case study pp. 5878-5904

Julia Schleier and Grit Walther

Optimal planning and scheduling of information processes during interaction among mobile objects pp. 5905-5924

Sokolov Boris, Ushakov Vitaly and Zakharov Valerii

A robust LP-based approach for a dynamic surgical case scheduling problem with sterilisation constraints pp. 5925-5944

H. Al Hasan, C. Guéret, D. Lemoine and D. Rivreau

A graph-based approach for integrating massive data in container terminals with application to scheduling problem pp. 5945-5965

Suri Liu, Wenyuan Wang, Shaopeng Zhong, Yun Peng, Qi Tian, Ruoqi Li, Xubo Sun and Yi Yang

Multitasking scheduling with job switching allowed between alternate periods pp. 5966-5988

Yan Wang, Jun-Qiang Wang and Yumei Huo

Quantitative modelling approaches for lean manufacturing under uncertainty pp. 5989-6015

Tania Rojas, Josefa Mula and Raquel Sanchis

Two parallel-machine scheduling with maximum waiting time for an emergency job pp. 6016-6027

Yiwei Jiang, Haodong Yuan, Ping Zhou, T. C. E. Cheng and Min Ji

Volume 62, issue 15, 2024

The interplay between artificial intelligence, production systems, and operations management resilience pp. 5361-5366

Samuel Fosso Wamba, Maciel M. Queiroz, Eric W. T. Ngai, Fred Riggins and Ygal Bendavid

AI and emerging technology adoption: a research agenda for operations management pp. 5367-5377

Viswanath Venkatesh, Raji Raman and Frederico Cruz-Jesus

AI-readiness and production resilience: empirical evidence from German manufacturing in times of the Covid-19 pandemic pp. 5378-5399

Christian M. Lerch, Heidi Heimberger, Angela Jäger, Djerdj Horvat and Frank Schultmann

Artificial intelligence in service industries: customers’ assessment of service production and resilient service operations pp. 5400-5416

Marcello M. Mariani and Matteo Borghi

Artificial intelligence-driven supply chain resilience in Vietnamese manufacturing small- and medium-sized enterprises pp. 5417-5456

Prasanta Kumar Dey, Soumyadeb Chowdhury, Amelie Abadie, Emilia Vann Yaroson and Sobhan Sarkar

Enablers of artificial intelligence adoption and implementation in production systems pp. 5457-5471

Mohammad I. Merhi and Antoine Harfouche

Exploring the role of artificial intelligence in building production resilience: learnings from the COVID-19 pandemic pp. 5472-5488

Vishwas Dohale, Milind Akarte, Angappa Gunasekaran and Priyanka Verma

Food products pricing theory with application of machine learning and game theory approach pp. 5489-5509

Mobina Mousapour Mamoudan, Zahra Mohammadnazari, Ali Ostadi and Ali Esfahbodi

How to use no-code artificial intelligence to predict and minimize the inventory distortions for resilient supply chains pp. 5510-5534

Sunil Kumar Jauhar, Shashank Mayurkumar Jani, Sachin S. Kamble, Saurabh Pratap, Amine Belhadi and Shivam Gupta

Artificial intelligence-driven risk management for enhancing supply chain agility: A deep-learning-based dual-stage PLS-SEM-ANN analysis pp. 5535-5555

Lai-Wan Wong, Garry Wei-Han Tan, Keng-Boon Ooi, Binshan Lin and Yogesh K. Dwivedi

Building resilience into smart mobility for urban cities: an emerging economy perspective pp. 5556-5573

Joash Mageto, Hossana Twinomurinzi, Rose Luke, Siyabonga Mhlongo, Kelvin Bwalya and Stella Bvuma

Smart and flexible manufacturing systems using Autonomous Guided Vehicles (AGVs) and the Internet of Things (IoT) pp. 5574-5595

Ilias Vlachos, Rodrigo Martinez Pascazzi, Miltiadis Ntotis, Konstantina Spanaki, Stella Despoudi and Panagiotis Repoussis

Towards knowledge graph reasoning for supply chain risk management using graph neural networks pp. 5596-5612

Edward Elson Kosasih, Fabrizio Margaroli, Simone Gelli, Ajmal Aziz, Nick Wildgoose and Alexandra Brintrup

Volume 62, issue 14, 2024

An analysis of blockchain versus relational databases for digitalising information flows in global supply chains using the analytic network process pp. 5016-5035

Dieter E. Wolf, Louis Louw and Daniel Palm

Sustainable collaborative strategy in pharmaceutical refrigerated logistics routing problem pp. 5036-5060

Tingting Chen, Feng Chu, Jiantong Zhang and Jiaqing Sun

Line balancing and task scheduling to minimise power peak of reconfigurable manufacturing systems pp. 5061-5086

Xavier Delorme and Paolo Gianessi

Optimal allocation of fast charging stations for large-scale transportation systems pp. 5087-5107

Caio dos Santos, José C. G. Andrade, Washington A. Oliveira and Christiano Lyra

Rolling horizon policies for multi-stage stochastic assemble-to-order problems pp. 5108-5126

Daniele Giovanni Gioia, Edoardo Fadda and Paolo Brandimarte

Digital enabled agility: Industry 4.0 unlocking real-time information processing, traceability, and visibility to unleash the next extent of agility pp. 5127-5148

Vivek Roy, Tobias Schoenherr and Jayanth Jayaram

Decentralised collaborative job reassignments in additive manufacturing pp. 5149-5167

Dominik Zehetner and Margaretha Gansterer

Analytical models for flow time estimation of additive manufacturing machines pp. 5168-5184

Erica Pastore, Arianna Alfieri, Andrea Matta and Barbara Previtali

Behaviour-based pricing for multi-version information goods pp. 5185-5210

Jingyan Li, Xiang Ji and Sandun C. Perera

An inventory rotation mechanism for relief supplies considering recycling and remanufacturing pp. 5211-5235

Xihui Wang, Anqi Zhu, Yu Fan and Liang Liang

Operational policies and performance analysis for overhead robotic compact warehousing systems with bin reshuffling pp. 5236-5251

Rong Wang, Peng Yang, Yeming Gong and Cheng Chen

The impacts of gray products and counterfeits in the luxury industry pp. 5252-5268

Fengmei Xu, Feifei Shan, Feng Yang and Ting Chen

Integer and constraint programming models for the straight and U-shaped assembly line balancing with hierarchical worker assignment problem pp. 5269-5292

Eyüp Ensar Işık and Seyda Topaloglu Yildiz

Deep learning and sequence mining for manufacturing process and sequence selection pp. 5293-5314

Changxuan Zhao, Mahmoud Dinar and Shreyes N. Melkote

Assessing perceived assembly complexity in human-robot collaboration processes: a proposal based on Thurstone’s law of comparative judgement pp. 5315-5335

Matteo Capponi, Riccardo Gervasi, Luca Mastrogiacomo and Fiorenzo Franceschini

An overview on human-centred technologies, measurements and optimisation in assembly systems pp. 5336-5358

Rim Slama, Ilhem Slama, Houda Tlahig, Pierre Slangen and Oussama Ben-Ammar

Correction pp. 5359-5359

The Editors

Volume 62, issue 13, 2024

Estimation-based production control of manufacturing–remanufacturing systems with uncertain seasonal return and imprecise demand and inventory pp. 4595-4622

Vladmir Polotski, Jean-Pierre Kenné and Ali Gharbi

AI-based forecasting for optimised solar energy management and smart grid efficiency pp. 4623-4644

Pierre Bouquet, Ilya Jackson, Mostafa Nick and Amin Kaboli

A matheuristic approach for the multi-level capacitated lot-sizing problem with substitution and backorder pp. 4645-4673

Hu Qin, Haocheng Zhuang, Chunlong Yu and Jiliu Li

Digital supply chain surveillance using artificial intelligence: definitions, opportunities and risks pp. 4674-4695

Alexandra Brintrup, Edward Kosasih, Philipp Schaffer, Ge Zheng, Guven Demirel and Bart L. MacCarthy

Data driven design optimisation: an empirical study of demand discovery combining theory of planned behaviour and Bayesian networks pp. 4696-4716

Yitian Liu, Kang Hu, Ruifeng Zhou, Xianfeng Ai and Yunqing Chen

Graph-enabled cognitive digital twins for causal inference in maintenance processes pp. 4717-4734

Kendrik Lim, Theresia Stefanny Yosal, Chun-Hsien Chen, Pai Zheng, Lihui Wang and Xun Xu

A dynamic and reactive routing protocol for the physical internet network pp. 4735-4753

Fatima Ezzahra Achamrah, Mariam Lafkihi and Eric Ballot

A novel approach for predicting Lockout/Tagout safety procedures for smart maintenance strategies pp. 4754-4775

Victor Delpla, Kevin Chapron, Jean-Pierre Kenné and Lucas A. Hof

A policy-based Monte Carlo tree search method for container pre-marshalling pp. 4776-4792

Ziliang Wang, Chenhao Zhou, Ada Che and Jingkun Gao

An adaptive artificial bee colony for hybrid flow shop scheduling with batch processing machines in casting process pp. 4793-4808

Jing Wang, Deming Lei and Hongtao Tang

A Pareto-based hybrid genetic simulated annealing algorithm for multi-objective hybrid production line balancing problem considering disassembly and assembly pp. 4809-4830

Xiang Sun, Shunsheng Guo, Jun Guo, Baigang Du, Zhijie Yang and Kaipu Wang

Condition-based maintenance optimisation for multi-component systems using mean residual life pp. 4831-4855

Rebaiaia Mohamed-Larbi and Ait-Kadi Daoud

A multi-agent resource bidding algorithm for order acceptance and assembly job shop scheduling pp. 4856-4883

Omar Abbaas and Jose A. Ventura

Cascaded adaptive global localisation network for steel defect detection pp. 4884-4901

Jianbo Yu, Yanshu Wang, Qingfeng Li, Hao Li, Mingyan Ma and Peilun Liu

Simulation and process mining in a cross-docking system: a case study pp. 4902-4925

Sadaf Shams-Shemirani, Reza Tavakkoli-Moghaddam, Alireza Amjadian and Bahar Motamedi-Vafa

Dual cycle time modelling and design optimisation for the bidirectional flow-rack AS/RS pp. 4926-4956

Hamzaoui Mohammed Adel, Sari Zaki and Belghoul Leila

Robust design and reconfiguration planning of mixed-model assembly lines under uncertain evolutions of product family pp. 4957-4979

Yosra Mezghani, S. Ehsan Hashemi-Petroodi, Simon Thevenin and Alexandre Dolgui

A critical review of selective maintenance for mission-oriented systems: challenges and a roadmap for novel contributions pp. 4980-5015

Hamzea Al-Jabouri, Ahmed Saif, Abdelhakim Khatab, Claver Diallo and Uday Venkatadri

Volume 62, issue 12, 2024

A sequential cross-product knowledge accumulation, extraction and transfer framework for machine learning-based production process modelling pp. 4181-4201

Jiarui Xie, Chonghui Zhang, Manuel Sage, Mutahar Safdar and Yaoyao Fiona Zhao

Optimal designs of the omnibus SPRT control chart for joint monitoring of process mean and dispersion pp. 4202-4225

Jing Wei Teoh, Wei Lin Teoh, Michael B.C. Khoo, Giovanni Celano and Zhi Lin Chong

A multi-objective discrete differential evolution algorithm for energy-efficient distributed blocking flow shop scheduling problem pp. 4226-4244

Fuqing Zhao, Hui Zhang, Ling Wang, Tianpeng Xu, Ningning Zhu and Jonrinaldi Jonrinaldi

A cooperative iterated greedy algorithm for the serial distributed permutation flowshop scheduling problem pp. 4245-4272

Biao Han, Quan-Ke Pan and Liang Gao

Knowledge graph driven credit risk assessment for micro, small and medium-sized enterprises pp. 4273-4289

Rony Mitra, Ayush Dongre, Piyush Dangare, Adrijit Goswami and Manoj Kumar Tiwari

Environmental aspects in supplier networks-a bi-objective just-in-time truck routing problem pp. 4290-4313

Julian Baals

An approximate dynamic programming approach to network-based scheduling of chemotherapy treatment sessions pp. 4314-4330

Arturo Wenzel, Antoine Sauré, Alejandro Cataldo, Pablo A. Rey and César Sánchez

Digital twin-enabled process control in the food industry: proposal of a framework based on two case studies pp. 4331-4348

Giovanni Paolo Carlo Tancredi, Eleonora Bottani and Giuseppe Vignali

Use statistical analysis to approximate integrated order batching problem pp. 4349-4371

Sen Xue and Chuanhou Gao

A machine learning study to improve the reliability of project cost estimates pp. 4372-4388

Timur Narbaev, Öncü Hazir, Balzhan Khamitova and Sayazhan Talgat

Optimal vehicle fleet planning and collaboration under carbon neutrality: a game-theoretic perspective pp. 4389-4406

Su Xiu Xu, Yu Ning, Huibing Cheng, Abraham Zhang, Yuan Gao and George Q. Huang

Quality design based on kernel trick and Bayesian semiparametric model for multi-response processes with complex correlations pp. 4407-4426

Shijuan Yang, Jianjun Wang, Xiaoying Cheng, Jiawei Wu and Jinpei Liu

Multi-population genetic algorithm with greedy job insertion inter-factory neighbourhoods for multi-objective distributed hybrid flow-shop scheduling with unrelated-parallel machines considering tardiness pp. 4427-4445

Hanghao Cui, Xinyu Li, Liang Gao and Chunjiang Zhang

The time-window strategy in the online order batching problem pp. 4446-4469

Sergio Gil-Borrás, Eduardo G. Pardo, Ernesto Jiménez and Kenneth Sörensen

Batch scheduling in a multi-purpose system with machine downtime and a multi-skilled workforce pp. 4470-4493

Ai Zhao and Jonathan F. Bard

Integrating production, replenishment and fulfillment decisions for supply chains: a target-based robust optimisation approach pp. 4494-4529

Daoheng Zhang, Hasan Hüseyin Turan, Ruhul Sarker and Daryl Essam

Employing disabled workers in production: simulating the impact on performance and service level pp. 4530-4545

Paweł Litwin, Dario Antonelli and Dorota Stadnicka

The impact of incentive-based programmes on job-shop scheduling with variable machine speeds pp. 4546-4564

Marc Füchtenhans and Christoph H. Glock

A comprehensive literature review of the flowshop group scheduling problems: systematic and bibliometric reviews pp. 4565-4594

Nilgün İnce, Derya Deliktaş and İhsan Hakan Selvi

Volume 62, issue 11, 2024

An efficient system of incentivizing truck drivers to accept night loads pp. 3819-3834

Yoshinori Suzuki and Meltem Denizel

Investigating make-or-buy decisions and the impact of learning-by-doing in the semiconductor industry pp. 3835-3852

Dóra Longauer, Tamás Vasvári and Zsuzsanna Hauck

Rooting out the root causes of order fulfilment errors: a multiple case study pp. 3853-3871

Max Helm, Alexandra Malikova and Joakim Kembro

Multi-objective multi-fidelity optimisation for position-constrained human-robot collaborative disassembly planning pp. 3872-3889

Yilin Fang, Zhiyao Li, Siwei Wang and Xinwei Lu

Analysis of factors influencing Circular-Lean-Six Sigma 4.0 implementation considering sustainability implications: an exploratory study pp. 3890-3917

Dounia Skalli, Abdelkabir Charkaoui, Anass Cherrafi, Alireza Shokri, Jose Arturo Garza-Reyes and Jiju Antony

Transportation scheduling for modules used in modular integrated construction pp. 3918-3931

Huiwen Wang, Liang Liao, Wen Yi and Lu Zhen

Digital-twin deep dynamic camera position optimisation for the V-STARS photogrammetry system based on 3D reconstruction pp. 3932-3951

Likun Wang, Zi Wang, Peter Kendall, Kevin Gumma, Alison Turner and Svetan Ratchev

A reinforcement learning driven two-stage evolutionary optimisation for hybrid seru system scheduling with worker transfer pp. 3952-3971

Yuting Wu, Ling Wang, Jing-fang Chen, Jie Zheng and Zixiao Pan

A context-aware real-time human-robot collaborating reinforcement learning-based disassembly planning model under uncertainty pp. 3972-3993

Ashkan Amirnia and Samira Keivanpour

An integrated lot-sizing and scheduling problem in a reconfigurable manufacturing system under workforce constraints pp. 3994-4013

Mohammad Rohaninejad, Behdin Vahedi-Nouri, Zdeněk Hanzálek and Reza Tavakkoli-Moghaddam

An improved deep reinforcement learning-based scheduling approach for dynamic task scheduling in cloud manufacturing pp. 4014-4030

Xiaohan Wang, Lin Zhang, Yongkui Liu and Yuanjun Laili

Two views of supply chain resilience pp. 4031-4045

Dmitry Ivanov

Load prediction of parcel pick-up points: model-driven vs data-driven approaches pp. 4046-4075

Thi-Thu-Tam Nguyen, Adnane Cabani, Iyadh Cabani, Koen De Turck and Michel Kieffer

A novel collaborative iterative greedy algorithm for hybrid flowshop scheduling problem with batch processing machines and variable sublots pp. 4076-4096

Chengshuai Li, Yuyan Han, Biao Zhang, Yuting Wang, Junqing Li and Kaizhou Gao

Delivery network design of a locker-drone delivery system pp. 4097-4121

Bipan Zou, Siqing Wu, Yeming Gong, Zhe Yuan and Yuqian Shi

Multiobjective analytical evolutionary algorithm for train stowage planning problem of steel industry pp. 4122-4142

Yun Dong and Xiangling Zhao

A new integrated strategy for optimising the maintenance cost of complex systems using reliability importance measures pp. 4143-4164

Mohamed-Larbi Rebaiaia and Daoud Ait-Kadi

Optimal and simple approximate solutions to a production-inventory system with two production rates pp. 4165-4180

Julia Miyaoka and Katy S. Azoury

Volume 62, issue 10, 2024

A viable supply chain model for managing panic-buying related challenges: lessons learned from the COVID-19 pandemic pp. 3415-3434

Towfique Rahman, Sanjoy Kumar Paul, Renu Agarwal, Nagesh Shukla and Firouzeh Taghikhah

A heuristic approach for multi-echelon inventory optimisation in a closed-loop supply chain pp. 3435-3459

Rodrigue Fokouop, Evren Sahin, Zied Jemai and Yves Dallery

Multi-objective reinforcement learning-based framework for solving selective maintenance problems in reconfigurable cyber-physical manufacturing systems pp. 3460-3482

Fatima Ezzahra Achamrah and Ali Attajer

Integrated lot-sizing and energy supply planning with onsite generation of intermittent renewable energy pp. 3483-3503

Ruiwen Liao and Céline Gicquel

Optimising production, maintenance, and quality control for imperfect manufacturing systems considering timely replenishment pp. 3504-3525

Liangxing Shi, Xiaolei Lv, Yingdong He and Zhen He

Computer-aided process planning system for laser forming: from CAD to part pp. 3526-3543

G. N. Nikolov, A. N. Thomsen, A. F. Mikkelstrup and Morten Kristiansen

Development and analysis of digital twins of production systems pp. 3544-3558

Leonard Overbeck, Stephen C. Graves and Gisela Lanza

An MBD-driven order remaining completion time prediction method based on SSA-BiLSTM in the IoT-enabled manufacturing workshop pp. 3559-3584

Haihua Zhu, Jianjie Wang, Changchun Liu, Wei Shi and Qixiang Cai

Multi-class pilot dispatching problem with stochastic pilotage duration pp. 3585-3605

Liyang Xiao, Peng Sun, Li Wang and Mengyu He

Deploying hybrid modelling to support the development of a digital twin for supply chain master planning under disruptions pp. 3606-3637

Ehsan Badakhshan and Peter Ball

A spatial-temporal feature fusion network for order remaining completion time prediction in discrete manufacturing workshop pp. 3638-3653

Shengbo Wang, Yu Guo, Shaohua Huang, Daoyuan Liu, Pengzhou Tang and Litong Zhang

Makespan estimation in a flexible job-shop scheduling environment using machine learning pp. 3654-3670

David Tremblet, Simon Thevenin and Alexandre Dolgui

A multi-level modelling and fidelity evaluation method of digital twins for creating smart production equipment in Industry 4.0 pp. 3671-3689

Chao Zhang, Jingjing Li, Guanghui Zhou, Qian Huang, Min Zhang, Yifan Zhi and Zhibo Wei

A prediction-based iterative Kuhn-Munkres approach for service vehicle reallocation in ride-hailing pp. 3690-3715

Yuhan Guo, Wenhua Li, Linfan Xiao and Hamid Allaoui

Fragility-based lot-sizing in veterinary pharmaceutical plants under demand uncertainty pp. 3716-3752

Rafael A. Campos, Aakil M. Caunhye, Douglas Alem and Pedro Munari

Mediating governance goals with patients and nurses satisfaction: a multi-actor multi-objective problem including fairness pp. 3753-3780

Valentina Bonomi, Renata Mansini and Roberto Zanotti

A sand cone model of sustainability performance: an empirical analysis pp. 3781-3799

Margherita Molinaro, Guido Orzes, Marco Sartor and Guido Nassimbeni

The influence of Industry 4.0 enabling technologies on social, economic and environmental sustainability of the food sector pp. 3800-3817

R. Stefanini and G. Vignali

Volume 62, issue 9, 2024

An inventory data-driven model for predictive-reactive production scheduling pp. 3059-3083

Satie L. Takeda-Berger and Enzo M. Frazzon

Stochastic modelling and analysis of a deteriorating serial production–inventory network pp. 3084-3098

Spyros I. Vlastos, A. S. Xanthopoulos and D. E. Koulouriotis

Unified modelling for continuous–discrete hybrid adaptive machining CPS of large thin-walled parts pp. 3099-3119

Xiong Zhao, Lianyu Zheng, Maoyuan Shi, Xuexin Zhang and Yuehong Zhang

The impact of IoT on manufacturing firm performance: the moderating role of firm-level IoT commitment and expertise pp. 3120-3145

Aishwarya Dash, Pushpesh Pant, S. P. Sarmah and M. K. Tiwari

Multi-objective optimisation for sustainable few-to-many pickup and delivery vehicle routing problem pp. 3146-3175

Francesco Pilati and Riccardo Tronconi

Inventory management for stockout-based substitutable products under centralised and competitive settings pp. 3176-3192

Michal Koren, Yael Perlman and Matan Shnaiderman

Waste reduction via image classification algorithms: beyond the human eye with an AI-based vision pp. 3193-3211

Mohammad Shahin, F. Frank Chen, Ali Hosseinzadeh, Hamed Bouzary and Awni Shahin

A constraint programming approach to a real-world workforce scheduling problem for multi-manned assembly lines with sequence-dependent setup times pp. 3212-3229

Funda Güner, Abdül K. Görür, Benhür Satır, Levent Kandiller and John. H. Drake

Deciding on when to change – a benchmark of metaheuristic algorithms for timing engineering changes pp. 3230-3250

Peter Burggräf, Fabian Steinberg, Tim Weißer and Ognjen Radisic-Aberger

Trend and seasonality features extraction with pre-trained CNN and recurrence plot pp. 3251-3262

Fernanda Strozzi and Rossella Pozzi

Dynamic cloud manufacturing service composition with re-entrant services: an online policy perspective pp. 3263-3287

Yang Hu, Yu Yang and Feng Wu

Integrated job-shop scheduling in an FMS with heterogeneous transporters: MILP formulation, constraint programming, and branch-and-bound pp. 3288-3304

Amir Ahmadi-Javid, Maryam Haghi and Pedram Hooshangi-Tabrizi

Discovery of fault-introducing tool groups with a numerical association rule mining method in a printed circuit board production line pp. 3305-3319

Yeonju Lee, Youngju Kim, Bogyeong Lee and Chang Ouk Kim

Sales forecasting of a food and beverage company using deep clustering frameworks pp. 3320-3332

Rony Mitra, Priyam Saha and Manoj Kumar Tiwari

Artificial intelligence in supply chain and operations management: a multiple case study research pp. 3333-3360

Violetta Giada Cannas, Maria Pia Ciano, Mattia Saltalamacchia and Raffaele Secchi

Unmanned Aerial Vehicle (UAV) path planning and control assisted by Augmented Reality (AR): the case of indoor drones pp. 3361-3382

Dimitris Mourtzis, John Angelopoulos and Nikos Panopoulos

Orthogonal binary singular value decomposition method for automated windshield wiper fault detection pp. 3383-3397

Taha J. Alhindi, Jaeseung Baek, Young-Seon Jeong and Myong K. Jeong

An ontology-guided approach to process formation and coordination of demand-driven collaborations pp. 3398-3414

Nikolai Kazantsev, Michael DeBellis, Qudamah Quboa, Pedro Sampaio, Nikolay Mehandjiev and Iain Duncan Stalker

Volume 62, issue 8, 2024

Towards greener trade and global supply chain environmental accounting. An embodied environmental resources blockchain design pp. 2705-2724

Xu Tian and Joseph Sarkis

Realisation of responsive and sustainable reconfigurable manufacturing systems pp. 2725-2746

Jelena Milisavljevic-Syed, Jiahong Li and Hanbing Xia

A deep reinforcement learning based hyper-heuristic for modular production control pp. 2747-2768

Marcel Panzer, Benedict Bender and Norbert Gronau

The sand-casting process: a meta-heuristic approach for an environment-friendly and profitable scheduling pp. 2769-2791

Lorenzo Tiacci and Andrea Rossi

Pursuing supply chain ecosystem health under environmental turbulence: a supply chain learning approach pp. 2792-2811

Liukai Wang, Xinyi Kong, Weiqing Wang and Yu Gong

Exploring servitization and digital transformation of manufacturing enterprises: evidence from an industrial internet platform in China pp. 2812-2831

Yi Liu, Justin Zuopeng Zhang, Sajjad Jasimuddin and M. Zied Babai

Modelling and application of joint maintenance grouping and workload smoothing for an automotive plant pp. 2832-2852

Minh-Tuan Truong, Hai-Canh Vu, Phuc Do, Benoit Iung and Alexandre Voisin

Risk-averse decision-making to maintain supply chain viability under propagated disruptions pp. 2853-2867

Tadeusz Sawik and Bartosz Sawik

Reformulations to improve the Lagrangian relaxation approach for the capacitated multi-product dynamic lot sizing problem with batch ordering pp. 2868-2887

Kevin A. Bunn and José A. Ventura

Genetic algorithms for planning and scheduling engineer-to-order production: a systematic review pp. 2888-2917

Anas Neumann, Adnene Hajji, Monia Rekik and Robert Pellerin

Supply chain digitisation and management pp. 2918-2926

Manoj Kumar Tiwari, Bopaya Bidanda, Joseph Geunes, Kiran Fernandes and Alexandre Dolgui

Supply chain visibility: A Delphi study on managerial perspectives and priorities pp. 2927-2942

Tarun Kumar Agrawal, Ravi Kalaiarasan, Jan Olhager and Magnus Wiktorsson

Universal point scheme with a platform and multiple retailers pp. 2943-2962

Xuehao Feng, Baolin Wen, Wenming Shi and Ilkyeong Moon

Modelling driver's reactive strategies in e-hailing platforms: an agent-based simulation model and an approximate analytical model pp. 2963-2981

Arulanantha Prabu Ponnachiyur Maruthasalam, Debjit Roy and Prahalad Venkateshan

Blockchain-driven operation strategy of financial supply chain under uncertain environment pp. 2982-3002

Huida Zhao, Jiaguo Liu and Guoqing Zhang

Disaster supply chain with information and digital technology integrated in its institutional framework pp. 3003-3022

Bishnu Prasad Dash and Vijaya Dixit

A decision support system for configuring spare parts supply chains considering different manufacturing technologies pp. 3023-3043

Alessandra Cantini, Mirco Peron, Filippo De Carlo and Fabio Sgarbossa

A multi-agent framework for container booking and slot allocation in maritime shipping pp. 3044-3058

Jasashwi Mandal, Adrijit Goswami, Sushma Kumari and Nishikant Mishra

Volume 62, issue 7, 2024

Circular economy and circularity supplier selection: a fuzzy group decision approach pp. 2307-2330

Chunguang Bai, Qingyun Zhu and Joseph Sarkis

Stochastic dynamic production planning in hybrid manufacturing and remanufacturing system with random usage durations pp. 2331-2349

Zhenxia Cheng

Leasing, trade-in for new, or the mixed of both: an analysis of new recycling modes driven by industry 4.0 technologies pp. 2350-2369

Kun Wang, Yongjian Li, Xiaohang Yue and Chunxing Fan

Monitoring aggregate warranty claims with dynamically designed CUSUM and EWMA charts pp. 2370-2397

Chenglong Li, Junjie Wang and Xiao-Lin Wang

Digital Twin simulation models: a validation method based on machine learning and control charts pp. 2398-2414

Carlos Henrique dos Santos, Afonso Teberga Campos, José Arnaldo Barra Montevechi, Rafael de Carvalho Miranda and Antonio Fernando Branco Costa

Order release optimisation for time-dependent and stochastic manufacturing systems pp. 2415-2434

Hubert Missbauer, Raik Stolletz and Manuel Schneckenreither

Bi-objective robust optimisation on relief collaborative distribution considering secondary disasters pp. 2435-2454

Dezhi Zhang, Yarui Zhang, Shuanglin Li, Shuangyan Li and Wanru Chen

Geographical relevance-based multi-period optimization for e-commerce supply chain resilience strategies under disruption risks pp. 2455-2482

Wei Pu, Shuang Ma and Xiangbin Yan

Production scheduling problem with assembly flow shop systems: mathematical optimisation models pp. 2483-2498

José Renatho da Silva Santana and Helio Yochihiro Fuchigami

Refurbishment and remanufacturing planning model for pre-owned consumer electronics pp. 2499-2521

Xavier Schepler, Nabil Absi and Antoine Jeanjean

How to effectively use distributed ledger technology in supply chain management? pp. 2522-2547

Amandine Herbe, Zarah Estermann, Valentin Holzwarth and Jan vom Brocke

Anticipatory shipping versus emergency shipment: data-driven optimal inventory models for online retailers pp. 2548-2565

Xinxin Ren, Yeming Gong, Yacine Rekik and Xianhao Xu

Classification of materials in cylindrical workpieces using image processing and machine learning techniques pp. 2566-2583

Chayan Maiti and Sreekumar Muthuswamy

A design method for edge–cloud collaborative product service system: a dynamic event-state knowledge graph-based approach with real case study pp. 2584-2605

Maolin Yang, Yuqian Yang and Pingyu Jiang

Travel time model for multiple-deep shuttle-based storage and retrieval systems pp. 2606-2639

Nenad Kosanić, Jakob Marolt, Nenad Zrnić and Tone Lerher

Contracts for biopharmaceutical manufacturing based on production cost and capabilities pp. 2640-2662

Yasemin Limon, Tugce Martagan and Ananth Krishnamurthy

Inventory replenishment decisions with uncertain price and demand pp. 2663-2682

Xiaoyue Zhang, Wenqiang Dai and Xiaoqiang Cai

Modelling and solving approaches for scheduling problems in reconfigurable manufacturing systems pp. 2683-2704

Xavier Delorme, Gérard Fleury, Philippe Lacomme and Damien Lamy

Volume 62, issue 6, 2024

Service-level-driven procurement and production lot-sizing problem with demand fulfilment pp. 1977-1998

Caio Paziani Tomazella, Maristela Oliveira Santos, Douglas Alem and Raf Jans

Impact of learning effect modelling in flowshop scheduling with makespan minimisation based on the Nawaz-Enscore-Ham algorithm pp. 1999-2014

Yenny Alexandra Paredes-Astudillo, Valérie Botta-Genoulaz and Jairo R. Montoya-Torres

The research landscape around the physical internet – a bibliometric analysis pp. 2015-2033

Christopher Münch, Manuel Wehrle, Tobias Kuhn and Evi Hartmann

Supply chain cybersecurity investments with interdependent risks under different information exchange modes pp. 2034-2059

Lu Xu, Yanhui Li, Yanwei Lin, Chaofeng Tang and Qi Yao

Investigation of scheduling integration of flexible manufacturing systems for mass customisation pp. 2060-2082

Yumin He and Milton L. Smith

A common due-date assignment problem with job rejection on parallel uniform machines pp. 2083-2092

Gur Mosheiov and Assaf Sarig

Integrating physiological and mental aspects in employee scheduling: an overview for practitioners in production management pp. 2093-2106

Barbara Tropschuh, Julien Cegarra and Olga Battaïa

A branch-and-bound approach to minimise the value-at-risk of the makespan in a stochastic two-machine flow shop pp. 2107-2123

Lei Liu and Marcello Urgo

Joint scheduling of spare parts production and service engineers based on progressive Pareto algorithm pp. 2124-2141

Bingxin Miao, Qianwang Deng, Like Zhang, Zhangwen Huo and Weifeng Han

True sparse PCA for reducing the number of essential sensors in virtual metrology pp. 2142-2157

Yifan Xie, Tianhui Wang, Young-Seon Jeong, Ali Tosyali and Myong K. Jeong

Do the US president's tweets better predict oil prices? An empirical examination using long short-term memory networks pp. 2158-2175

Stephanie Beyer Díaz, Kristof Coussement, Arno De Caigny, Luis Fernando Pérez and Stefan Creemers

Business model selection for durable products based on price optimisation with a two-dimensional description of customers’ usage patterns pp. 2176-2201

Tianzhu Ye, Liping Zhou, Shan Jiang and Zhibin Jiang

Supply chain delivery performance improvement: a white-box perspective pp. 2202-2219

Liangyan Tao, Ailin Liang and Maxim A. Bushuev

Conceptualisation of a 7-element digital twin framework in supply chain and operations management pp. 2220-2232

Dmitry Ivanov

Blockchain-based credible manufacturing data sharing for a collaborative manufacturing supply chain pp. 2233-2254

Kangqian Zheng, Kai Ding, Jizhuang Hui, Fuqiang Zhang, Jingxiang Lv and Felix T.S. Chan

Development of a flexible data management system, to implement predictive maintenance in the Industry 4.0 context pp. 2255-2271

Vincent Ciancio, Lazhar Homri, Jean-Yves Dantan and Ali Siadat

Minimising total weighted completion time for semi-online single machine scheduling with known arrivals and bounded processing times pp. 2272-2285

Hajar Nouinou, Taha Arbaoui and Alice Yalaoui

An Ontology-based Engineering methodology applied to aerospace Reconfigurable Manufacturing Systems design pp. 2286-2304

Rebeca Arista, Fernando Mas, Domingo Morales-Palma and Carpoforo Vallellano

Correction pp. 2305-2305

The Editors

Volume 62, issue 5, 2024

Correction pp. (I)-(I)

The Editors

Will the presence of ‘fashion knockoffs’ benefit the original-designer-label product supply chain? pp. 1541-1566

Yingjia Wang, Xiaoyan Xu, Tsan-Ming Choi and Bin Shen

Joint quality and maintenance decisions under servitization business model pp. 1567-1585

Kangzhou Wang, Hui Jing, Dong-dong Wang and Feng Jiang

Optimal warranty option and post-warranty maintenance strategy under a warranty menu: from a consumer perspective pp. 1586-1608

Peirui Qiao, Ming Luo, Yizhong Ma and Abdul Jabbar

Optimising location, inventory and transportation in a sustainable closed-loop supply chain pp. 1609-1632

Pablo Becerra, Josefa Mula and Raquel Sanchis

Evaluating usability, functionality, and usefulness of the warehousing error prevention tool pp. 1633-1647

Azin Setayesh, Eric H. Grosse, Michael A. Greig, Christoph H. Glock and W. Patrick Neumann

Cost and performance comparison of tier-captive SBS/RS with a novel AVS/RS/ML pp. 1648-1662

Banu Yetkin Ekren, Tone Lerher, Melis Küçükyaşar and Boris Jerman

Intermittent demand, inventory obsolescence, and temporal aggregation forecasts pp. 1663-1685

Kamal Sanguri, Sabyasachi Patra, Konstantinos Nikolopoulos and Sushil Punia

Industrial processes and the smart grid: overcoming the variability of renewables by using built-in process storage and intelligent control strategies pp. 1686-1698

Yunzhi Chen, Blake W. Billings and Kody M. Powell

Hierarchical RNN-based framework for throughput prediction in automotive production systems pp. 1699-1714

Mengfei Chen, Richard Furness, Rajesh Gupta, Saumuy Puchala and Weihong (Grace) Guo

Integrated optimization of order splitting and distribution routing for the front warehouse mode e-retailing pp. 1715-1736

Jianqiang Tang, Chao Qi and Hongwei Wang

Dynamic distributed decision-making for resilient resource reallocation in disrupted manufacturing systems pp. 1737-1757

Mingjie Bi, Ilya Kovalenko, Dawn M. Tilbury and Kira Barton

Mixed-integer programming model and hybrid local search genetic algorithm for human–robot collaborative disassembly line balancing problem pp. 1758-1782

Tengfei Wu, Zeqiang Zhang, Yanqing Zeng and Yu Zhang

The physics of decision approach: a physics-based vision to manage supply chain resilience pp. 1783-1802

Thibaut Cerabona, Frederick Benaben, Benoit Montreuil, Matthieu Lauras, Louis Faugère, Miguel R. Campos and Julien Jeany

Machine learning based prediction of melt pool morphology in a laser-based powder bed fusion additive manufacturing process pp. 1803-1817

Zhibo Zhang, Chandan Kumar Sahu, Shubhendu Kumar Singh, Rahul Rai, Zhuo Yang and Yan Lu

A data-driven methodology for the periodic review of spare parts supply chain configurations pp. 1818-1845

Alessandra Cantini, Mirco Peron, Filippo De Carlo and Fabio Sgarbossa

Maintenance modelling for work rolls in hot finishing mill group with constraint of thermal character pp. 1846-1861

Xiaojun Zhou and Xurui Ben

Opportunistic maintenance optimisation for offshore wind farm with considering random wind speed pp. 1862-1878

Chun Su and Lin Wu

Responding to epidemic-driven demand: the role of supply channels pp. 1879-1900

Jaeseok Lee, Min Kyung Lee, Seongkyoon Jeong, Brandon Lee and Minseok Park

E-commerce supply chain network design using on-demand warehousing system under uncertainty pp. 1901-1927

Junhyeok Lee, Changseong Ko and Ilkyeong Moon

The applications of Internet of Things (IoT) in industrial management: a science mapping review pp. 1928-1952

Xiaoshao Mu and Maxwell Fordjour Antwi-Afari

The impacts of digital technologies on coping with the COVID-19 pandemic in the manufacturing industry: a systematic literature review pp. 1953-1976

Marco Ardolino, Andrea Bacchetti, Alexandre Dolgui, Guglielmo Franchini, Dmitry Ivanov and Anand Nair

Volume 62, issue 4, 2024

Correction Notice pp. (i)-(ii)

The Editors

Using an incentive-compatibility due-date quotation to improve the performance for one-of-a-kind production shop floors controlled by load-based pull systems pp. 1072-1091

Guodong Huang and Yacob Khojasteh

Variational AutoEncoders-LSTM based fault detection of time-dependent high dimensional processes pp. 1092-1107

Ahmed Maged, Chun Fai Lui, Salah Haridy and Min Xie

Catastrophe insurance and flexible planning for supply chain disruption management: a stochastic simulation case study pp. 1108-1125

Yingjie Fan, Frank Schwartz, Stefan Voß and David L. Woodruff

Improved milling stability analysis for chatter-free machining parameters planning using a multi-fidelity surrogate model and transfer learning with limited experimental data pp. 1126-1143

Congying Deng, Jielin Tang, Sheng Lu, Ying Ma, Lijun Lin and Jianguo Miao

A two-stage stochastic programming model and parallel Master–Slave adaptive GA for flexible Seru system formation pp. 1144-1161

Yuhong Ren, Jiafu Tang, Yang Yu and Xiaolong Li

Effects of adaptive cooperation among heterogeneous manufacturers on supply chain viability under fluctuating demand in post-COVID-19 era: an agent-based simulation pp. 1162-1188

Anding Zhu, Yunyan Han and Hong Liu

Optimal joint decisions of production and emission reduction considering firms’ risk aversion and carbon tax rate pp. 1189-1205

Qi Qi, Shanling Li and Ren-Qian Zhang

Due date quoting and rescheduling in a fixed production sequence pp. 1206-1220

Herbert Jodlbauer and Shailesh Tripathi

Data-driven risk-averse newsvendor problems: developing the CVaR criteria and support vector machines pp. 1221-1238

Zhen-Yu Chen

Assigning rest times to workers in assembly lines with ergonomically hazardous tasks: an approach to defend companies’ profitability pp. 1239-1261

Lorenzo Tiacci

On solving the cross-dock door assignment problem pp. 1262-1276

Laureano F. Escudero, M. Araceli Garín and Aitziber Unzueta

Making electric vehicle batteries safer through better inspection using artificial intelligence and cobots pp. 1277-1296

Ajit Sharma

Flow shop scheduling with human–robot collaboration: a joint chance-constrained programming approach pp. 1297-1317

Duo Wang and Junlong Zhang

An analytical method for investigating multi-tier sustainable supply chains: simplifying the complex pp. 1318-1335

Chunguang Bai, Joseph Sarkis and Sherwat Ibrahim

Improving reliability of assembly supply chains with disruption risk: stakeholders' subsidy interplay pp. 1336-1357

Chen Wang, Mengchu Li and Nanfang Cui

Due-date assignment scheduling with only mean and support of processing times pp. 1358-1381

Qing Yue, Shenghai Zhou and Haiyan Yan

The interplay of manufacturer encroachment and blockchain adoption to combat counterfeits in a platform supply chain pp. 1382-1398

Pengwen Hou, Chi Zhang and Yating Li

A systematic literature review exploring and linking circular economy and sustainable development goals in the past three decades (1991–2022) pp. 1399-1433

Emilia Vann Yaroson, Soumyadeb Chowdhury, Sachin Kumar Mangla, Prasanta Dey, Felix T. S. Chan and Melanie Roux

From natural language to simulations: applying AI to automate simulation modelling of logistics systems pp. 1434-1457

Ilya Jackson, Maria Jesus Saenz and Dmitry Ivanov

Assessing supply chain responsiveness, resilience and robustness (Triple-R) by computer simulation: a systematic review of the literature pp. 1458-1488

Pranesh Saisridhar, Matthias Thürer and Balram Avittathur

Big data analytics in supply chain decarbonisation: a systematic literature review and future research directions pp. 1489-1509

Devinder Kumar, Rajesh Kr Singh, Ruchi Mishra and Ilias Vlachos

A review of explainable artificial intelligence in supply chain management using neurosymbolic approaches pp. 1510-1540

Edward Elson Kosasih, Emmanuel Papadakis, George Baryannis and Alexandra Brintrup

Volume 62, issue 3, 2024

An iterated local search for customer order scheduling in additive manufacturing pp. 605-625

Benedikt Zipfel, Janis Neufeld and Udo Buscher

A bottom-up multi-objective optimisation approach to dynamic facility layout planning pp. 626-643

Pablo Pérez-Gosende, Josefa Mula and Manuel Díaz-Madroñero

Simultaneous allocation of buffer capacities and service times in unreliable production lines pp. 644-664

Khelil Kassoul, Naoufel Cheikhrouhou and Nicolas Zufferey

Improving the decision-making process by considering supply uncertainty – a case study in the forest value chain pp. 665-684

Vanessa Simard, Mikael Rönnqvist, Luc LeBel and Nadia Lehoux

Application of supportive and substitutive technologies in manual warehouse order picking: a content analysis pp. 685-704

Eric H. Grosse

Reinforcement learning and stochastic dynamic programming for jointly scheduling jobs and preventive maintenance on a single machine to minimise earliness-tardiness pp. 705-719

Abderrazzak Sabri, Hamid Allaoui and Omar Souissi

Online monitoring of high-dimensional asynchronous and heterogeneous data streams for shifts in location and scale pp. 720-736

Honghan Ye, Ziqian Zheng, Jing-Ru C. Cheng, Brock Hable and Kaibo Liu

Food inspector scheduling with outcome and daily-schedule effects pp. 737-766

Ming Liu, Hao Tang, Feng Chu, Zhanguo Zhu and Chengbin Chu

Production scheduling in a reconfigurable manufacturing system benefiting from human-robot collaboration pp. 767-783

Behdin Vahedi-Nouri, Reza Tavakkoli-Moghaddam, Zdeněk Hanzálek and Alexandre Dolgui

An efficient adaptive r-MD multivariate single control chart for nonlinear multiple quality characteristics pp. 784-822

Arijit Maji and Indrajit Mukherjee

Financial ripple effect in complex adaptive supply networks: an agent-based model pp. 823-845

Yaniv Proselkov, Jie Zhang, Liming Xu, Erik Hofmann, Thomas Y. Choi, Dale Rogers and Alexandra Brintrup

An elitist cuckoo search algorithm for combined heat and power economic dispatch pp. 846-866

Qiangda Yang, Hongbo Gao, Ning Dong and Peng Liu

Energy-efficient job shop scheduling problem with transport resources considering speed adjustable resources pp. 867-890

Dalila B.M.M. Fontes, Seyed Mahdi Homayouni and João Chaves Fernandes

The influence of carbon emission reduction instruments on blockchain technology adoption in recycling batteries of the new energy vehicles pp. 891-908

Zhangwei Feng, Na Luo, Timofey Shalpegin and Huan Cui

On the dynamics of return collection in closed-loop supply chains pp. 909-932

Shupeng Huang, Haiyan Lu, Junyi Lin and Borja Ponte

Simultaneous control of multiple machines for energy efficiency: a simulation-based approach pp. 933-948

Nicla Frigerio, Barış Tan and Andrea Matta

Linking the digital and sustainable transformation with supply chain practices pp. 949-973

Lara Schilling and Stefan Seuring

A scoping review of human robot interaction research towards Industry 5.0 human-centric workplaces pp. 974-990

Sotirios Panagou, W. Patrick Neumann and Fabio Fruggiero

Systematic review of adopting blockchain in supply chain management: bibliometric analysis and theme discussion pp. 991-1016

Yanhu Han and Xiao Fang

Plant capacity notions: review, new definitions, and existence results at firm and industry levels pp. 1017-1040

Kristiaan Kerstens and Jafar Sadeghi

Security in modern manufacturing systems: integrating blockchain in artificial intelligence-assisted manufacturing pp. 1041-1071

Dhruv Patel, Chandan Kumar Sahu and Rahul Rai

Volume 62, issue 1-2, 2024

Special issue in memory of Dr. Jean-Marie Proth (7.12.1938–17.06.2021) pp. 1-6

Chengbin Chu, Feng Chu, Alexandre Dolgui, Rakesh Nagi and Xiaolan Xie

Optimal placement of multiple finite-size rectangular facilities in an existing layout pp. 7-23

Ketan Date and Rakesh Nagi

Optimal and heuristic solutions for placing multiple finite-size rectangular facilities in an existing layout pp. 24-44

Ketan Date and Rakesh Nagi

Distributionally robust multi-period humanitarian relief network design integrating facility location, supply inventory and allocation, and evacuation planning pp. 45-70

Yunqiang Yin, Jie Wang, Feng Chu and Dujuan Wang

An exact method for machining lines design with equipment selection and line balancing pp. 71-91

Olga Battaïa, Alexandre Dolgui and Nikolai Guschinsky

A multi-objective joint optimisation method for simultaneous part family formation and configuration design in delayed reconfigurable manufacturing system (D-RMS) pp. 92-109

Sihan Huang, Jiaxin Tan, Yuqian Lu, Shokraneh K. Moghaddam, Guoxin Wang and Yan Yan

A new MIP approach for balancing and scheduling of mixed model assembly lines with alternative precedence relations pp. 110-121

Tadeusz Sawik

Impact of limiting the ergonomic risk on the economic and productive efficiency of an assembly line pp. 122-140

Rocío Alfaro-Pozo and Joaquín Bautista-Valhondo

Automated model generation framework for material flow simulations of production systems pp. 141-156

Marvin Carl May, Christian Nestroy, Leonard Overbeck and Gisela Lanza

Production planning with flexible manufacturing systems under demand uncertainty pp. 157-170

Milad Elyasi, Başak Altan, Ali Ekici, Okan Örsan Özener, İhsan Yanıkoğlu and Alexandre Dolgui

Federated explainable artificial intelligence (fXAI): a digital manufacturing perspective pp. 171-182

Andrew Kusiak

Modeling and analysis of a new production methodology for achieving mass customization pp. 183-203

Sanchit Singh and Subhash C. Sarin

Designing distributed decision-making authorities for smart factories – understanding the role of manufacturing network architecture pp. 204-222

Oliver Antons and Julia C. Arlinghaus

A single-vendor, multiple-buyer coordinated supply chain model with unequal-sized batch shipments and cycle-dependent safety stocks pp. 223-244

Davide Castellano, Mosè Gallo and Christoph H. Glock

Forecast and decision horizons in a commodity trading model pp. 245-259

Suresh P. Sethi and Anshuman Chutani

Warehousing and distribution network design from a third-party logistics (3PL) company perspective pp. 260-270

Georgios Karagiannis, Ioannis Minis, Christina Arampantzi and Georgios Dikas

A methodological framework for the design of efficient resilience in supply networks pp. 271-290

Riccardo Aldrighetti, Martina Calzavara, Michele Martignago, Ilenia Zennaro, Daria Battini and Dmitry Ivanov

Scheduling in Industrial environment toward future: insights from Jean-Marie Proth pp. 291-317

Marzieh Khakifirooz, Michel Fathi, Alexandre Dolgui and Panos M. Pardalos

Distributed appointment assignment and scheduling under uncertainty pp. 318-335

Li Xue, Yantong Li, Zheng Wang, Sai-Ho Chung and Xin Wen

Multi-criteria scheduling of realistic flexible job shop: a novel approach for integrating simulation modelling and multi-criteria decision making pp. 336-358

M. Thenarasu, K. Rameshkumar, M. Di Mascolo and S.P. Anbuudayasankar

Weighted tardiness minimisation for unrelated machines with sequence-dependent and resource-constrained setups pp. 359-379

Ioannis Avgerinos, Ioannis Mourtos, Stavros Vatikiotis and Georgios Zois

Robust identical parallel machine scheduling with two-stage time-of-use tariff and not-all-machine option pp. 380-403

Xin Feng and Hongjun Peng

Deep reinforcement learning for solving steelmaking-continuous casting scheduling problems under time-of-use tariffs pp. 404-420

Ruilin Pan, Qiong Wang, Jianhua Cao and Chunliu Zhou

Scheduling a multi-agent flow shop with two scenarios and release dates pp. 421-443

Xinyue Wang, Tao Ren, Danyu Bai, Feng Chu, Yaodong Yu, Fanchun Meng and Chin-Chia Wu

Scheduling on identical machines with preemption and setup times pp. 444-459

Amina Haned, Abida Kerdali and Mourad Boudhar

A hybrid discrete differential evolution – genetic algorithm approach with a new batch formation mechanism for parallel batch scheduling considering batch delivery pp. 460-482

Ibrahim Kucukkoc, Gulsen Aydin Keskin, Aslan Deniz Karaoglan and Sevgi Karadag

A 2-dimensional guillotine cutting stock problem with variable-sized stock for the honeycomb cardboard industry pp. 483-500

Paula Terán-Viadero, Antonio Alonso-Ayuso and F. Javier Martín-Campo

Closed-loop inventory routing problem for perishable food with returnable transport items selection pp. 501-521

Yipei Zhang, Feng Chu, Ada Che and Yantong Li

Voluntary environmental effort under (s,S) inventory policy* pp. 522-535

Alain Bensoussan and Fouad El Ouardighi

IoT-based milk-run routing for manufacturing system: an application case in an automotive company pp. 536-555

Francesco Facchini, Giorgio Mossa, Claudio Sassanelli and Salvatore Digiesi

A decomposition and coordination method for optimising (Q, S) policies in a two-echelon distribution system with joint replenishment pp. 556-573

Lei Wang and Haoxun Chen

Valid inequalities for the non-unit demand capacitated minimum spanning tree problem with arc time windows and flow costs pp. 574-585

Manolis N. Kritikos and George Ioannou

Inventory stacking with partial information pp. 586-604

Daqin Wang, Ou Tang and Lihua Zhang