International Journal of Production Research

1999 - 2025

Current editor(s): Professor A. Dolgui

From Taylor & Francis Journals
Bibliographic data for series maintained by Chris Longhurst ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 58, issue 24, 2020

Special issue on sustainability with innovation for manufacturing and supply chain management pp. 7311-7313

Ray Y. Zhong, Xun Xu and Olga Battaïa

Sustainable innovation in the dairy supply chain: enabling factors for intermodal transportation pp. 7314-7333

Violetta Giada Cannas, Federica Ciccullo, Margherita Pero and Roberto Cigolini

An innovative decision-making framework for evaluating transportation service providers based on sustainable criteria pp. 7334-7352

Ananna Paul, Md. Abdul Moktadir and Sanjoy Kumar Paul

A multi-cut L-shaped method for resilient and responsive supply chain network design pp. 7353-7381

Fatemeh Sabouhi, Mohammad Saeed Jabalameli, Armin Jabbarzadeh and Behnam Fahimnia

Rule-based incentive mechanism design for a decentralised collaborative transport network pp. 7382-7398

Mariam Lafkihi, Shenle Pan and Eric Ballot

A sustainable production capability evaluation mechanism based on blockchain, LSTM, analytic hierarchy process for supply chain network pp. 7399-7419

Zhi Li, Hanyang Guo, Ali Vatankhah Barenji, W. M. Wang, Yijiang Guan and George Q. Huang

Optimising the configuration of green supply chains under mass personalisation pp. 7420-7438

Jianming Yao, Heyun Shi and Chang Liu

A joint economic lot-size model for sustainable industries of recycled content products pp. 7439-7470

Mostafa Parsa, Ali Shahandeh Nookabadi and Zümbül Atan

Decisions and coordination of green e-commerce supply chain considering green manufacturer's fairness concerns pp. 7471-7489

Yuyan Wang, Runjie Fan, Liang Shen and Mingzhou Jin

Logistics sustainability practices: an IoT-enabled smart indoor parking system for industrial hazardous chemical vehicles pp. 7490-7506

Zhiheng Zhao, Mengdi Zhang, Gangyan Xu, Dengyin Zhang and George Q. Huang

Short- and long-term repeated game behaviours of two parallel supply chains based on government subsidy in the vehicle market pp. 7507-7530

Binshuo Bao, Junhai Ma and Mark Goh

A simulation-based dynamic scheduling and dispatching system with multi-criteria performance evaluation for Industry 3.5 and an empirical study for sustainable TFT-LCD array manufacturing pp. 7531-7547

Tzu-Yen Hong and Chen-Fu Chien

Sustainable quality control mechanism of heavy truck production process for Plant-wide production process pp. 7548-7564

Hongfei Guo, Ru Zhang, Yingxin Zhu, Ting Qu, Min Zou, Xiangyue Chen, Yaping Ren and Zhihui He

Examining freight performance of third-party logistics providers within the automotive industry in India: an environmental sustainability perspective pp. 7565-7592

Mohit Goswami, Arijit De, Muhammad Khoirul Khakim Habibi and Yash Daultani

Volume 58, issue 23, 2020

An energy-aware cyber physical system for energy Big data analysis and recessive production anomalies detection in discrete manufacturing workshops pp. 7059-7077

Chaoyang Zhang, Zhengxu Wang, Kai Ding, Felix T.S. Chan and Weixi Ji

Modelling and analysis for processing energy consumption of mechanism and data integrated machine tool pp. 7078-7093

Lishu Lv, Zhaohui Deng, Can Yan, Tao Liu, Linlin Wan and Qianwei Gu

Cascade neural network algorithm with analytical connection weights determination for modelling operations and energy applications pp. 7094-7111

Zhengxu Wang, Waqar Ahmed Khan, Hoi-Lam Ma and Xin Wen

A fuzzy control system for assembly line balancing with a three-state degradation process in the era of Industry 4.0 pp. 7112-7129

Jiage Huo, Jianghua Zhang and Felix T. S. Chan

Reducing waste in manufacturing operations: bi-objective scheduling on a single-machine with coupled-tasks pp. 7130-7148

Corentin Le Hesran, Aayush Agarwal, Anne-Laure Ladier, Valérie Botta-Genoulaz and Valérie Laforest

Mixed-integer/linear and constraint programming approaches for activity scheduling in a nuclear research facility pp. 7149-7166

Oliver Polo-Mejía, Christian Artigues, Pierre Lopez and Virginie Basini

Competitive consignment matching: applications in supply chain pp. 7167-7180

Hui Yang, Ding Zhang, Bintong Chen and Baosheng Gu

Responsible & sustainable manufacturing pp. 7181-7182

Surendra M. Gupta, Aşkıner Güngör, Kannan Govindan, Eren Özceylan, Can Berk Kalaycı and Rajesh Piplani

Trade-in-to-upgrade as a marketing strategy in disassembly-to-order systems at the edge of blockchain technology pp. 7183-7200

Özden Tozanlı, Elif Kongar and Surendra M. Gupta

Pressure or premium: what works best where? Antecedents and outcomes of sustainable manufacturing practices pp. 7201-7217

Sirish Kumar Gouda and Haritha Saranga

Value depreciation factors for new and remanufactured high-technology products: a case study on iPhones and iPads pp. 7218-7249

Liangchuan Zhou and Surendra M. Gupta

Integrated disassembly line balancing and routing problem pp. 7250-7268

Zülal Diri Kenger, Çağrı Koç and Eren Özceylan

The organic joint point of new kinetic energy and green development in Chinese manufacturing SMEs pp. 7269-7291

Ying Luo, Xiaowen Jie and Xiaoping Li

Exploring the impacts and contributions of maintenance function for sustainable manufacturing pp. 7292-7310

Maria Holgado, Marco Macchi and Stephen Evans

Volume 58, issue 22, 2020

Advance booking pricing in O2O commerce with demand leakage using game theory for tourism supply chains pp. 6739-6774

Mahsa Noori-daryan, Ata Allah Taleizadeh and Masoud Rabbani

Information sharing format and carbon emission abatement in a supply chain with competition pp. 6775-6790

Man Yu and Erbao Cao

Optimal dynamic imperfect preventive maintenance of wind turbines based on general renewal processes pp. 6791-6810

Jinhe Wang, Xiaohong Zhang, Jianchao Zeng and Yunzheng Zhang

Two parallel identical machines scheduling to minimise the maximum inter-completion time pp. 6811-6825

Feifeng Zheng, Yang Sui, E Zhang, Yinfeng Xu and Ming Liu

A new unrelated parallel machine scheduling problem with tool changes to minimise the total energy consumption pp. 6826-6845

Like Zhang, Qianwang Deng, Guiliang Gong and Wenwu Han

A new method for solving buffer allocation problem in large unbalanced production lines pp. 6846-6867

Shaohui Xi, Qingxin Chen, James MacGregor Smith, Ning Mao, Ailin Yu and Huiyu Zhang

Keep it or give back? Optimal pricing strategy of reward-based crowdfunding with a hybrid mechanism in the sharing economy pp. 6868-6889

Lei Guan, Yongxue Mu, Xiaolin Xu, Lianmin Zhang and Jun Zhuang

Virtual commissioning for an Overhead Hoist Transporter in a semiconductor FAB pp. 6890-6898

Joo Y. Lee, Kwanwoo Lee and Sangchul Park

A multi-commodity location-inventory problem in a closed-loop supply chain with commercial product returns pp. 6899-6916

Hao Guo, Ying Zhang, Chunnan Zhang, Yidong Zhang and Zixin Han

An experimental analysis of deepest bottom-left-fill packing methods for additive manufacturing pp. 6917-6933

Luiz J.P. Araújo, Ajit Panesar, Ender Özcan, Jason Atkin, Martin Baumers and Ian Ashcroft

The impact of incomplete vessel arrival information on container stacking pp. 6934-6948

Yuyan He, Aihu Wang and Hailiang Su

Optimising the storage assignment and order-picking for the compact drive-in storage system pp. 6949-6969

David Revillot-Narváez, Francisco Pérez-Galarce and Eduardo Álvarez-Miranda

Simulation-based solution for a dynamic multi-crane-scheduling problem in a steelmaking shop pp. 6970-6984

Ji Li, Anjun Xu and Xuesong Zang

Promoting sustainability of the integrated production-inventory-distribution system through the Physical Internet pp. 6985-7004

Xiao-shuai Peng, Shou-feng Ji and Ting-ting Ji

Delegation vs. direct sourcing revisited: contract types under correlated supply risks and asymmetric cost information pp. 7005-7022

Jiguang Chen, He Xu and Pin Zhou

General enterprise performance measurement architecture pp. 7023-7043

Michel Stella Ravelomanantsoa, Yves Ducq and Bruno Vallespir

Cooperation performance of multi-organisations operating in a sharing economy: game theory with agent-based modelling pp. 7044-7057

Qingfeng Meng, Leilei Chu, Zhen Li, Jingxian Chen, Jianguo Du and Changzhi Wu

Volume 58, issue 21, 2020

An optimal integrated production and maintenance strategy for a multi-wind turbines system pp. 6417-6440

Zied Hajej, Rezg Nidhal, Chelbi Anis and Maryem Bouzoubaa

Reducing the total tardiness by Seru production: model, exact and cooperative coevolution solutions pp. 6441-6452

Wei Sun, Yang Yu, Qi Lou, Junwei Wang and Yuechao Guan

Optimal job scheduling and inspection of a machine with delayed failure pp. 6453-6473

Samareh Azimpoor and Sharareh Taghipour

Robust scheduling of flexible manufacturing systems with unreliable operations and resources pp. 6474-6492

Gonzalo Mejía and Dimitri Lefebvre

Modelling supply chain network for procurement of food grains in India pp. 6493-6512

D. G. Mogale, Abhijeet Ghadge, Sri Krishna Kumar and Manoj Kumar Tiwari

Flexible flow line scheduling considering machine eligibility in a digital dental laboratory pp. 6513-6531

Siavash Valizadeh, Omid Fatahi Valilai and Mahmoud Houshmand

A fix-and-relax heuristic for the single-item lot-sizing problem with a flow-shop system and energy constraints pp. 6532-6552

Melek Rodoplu, Taha Arbaoui and Alice Yalaoui

Pharmaceutical quality control laboratory digital twin – A novel governance model for resource planning and scheduling pp. 6553-6567

Miguel R. Lopes, Andrea Costigliola, Rui Pinto, Susana Vieira and Joao M.C. Sousa

Scheduling flowline manufacturing cells with inter-cellular moves: non-permutation schedules and material flows in the cell scheduling problem pp. 6568-6584

J. S. Neufeld, F. F. Teucher and U. Buscher

Semiconductor wafer fabrication production planning using multi-fidelity simulation optimisation pp. 6585-6600

Fan Zhang, Jie Song, Yingzhuo Dai and Jie Xu

The impact of build orientation policies on the completion time in two-dimensional irregular packing for additive manufacturing pp. 6601-6615

Yosep Oh, Chi Zhou and Sara Behdad

Maintenance on leasing sales strategies for manufacturing/remanufacturing system with increasing failure rate and carbon emission pp. 6616-6637

Zied Hajej, Nidhal Rezg and Ali Gharbi

Modelling and solving mixed-model two-sided assembly line balancing problem with sequence-dependent setup time pp. 6638-6659

Wucheng Yang and Wenming Cheng

Game theory applications in production research in the sharing and circular economy era pp. 6660-6669

Tsan-Ming Choi, Ata Allah Taleizadeh and Xiaohang Yue

Research on supply network resilience considering random and targeted disruptions simultaneously pp. 6670-6688

Xiao-qiu Shi, Wei Long, Yan-yan Li, Ding-shan Deng, Yong-lai Wei and Hua-guo Liu

A population-based metaheuristic for the capacitated lot-sizing problem with unrelated parallel machines pp. 6689-6706

Benjamin Vincent, Christophe Duhamel, Libo Ren and Nikolay Tchernev

A new approach to the analysis of homogeneous transfer lines with unreliable buffers subject to time-dependent failure pp. 6707-6723

Beixin Xia, Chen Wang, Ya Gao, Yunfang Peng and Lei Liu

Lot synchronization in make-to-order shops with order release control: an assessment by simulation pp. 6724-6738

Nuno O. Fernandes, Matthias Thürer, Mark Stevenson and Sílvio Carmo-Silva

Volume 58, issue 20, 2020

DC programming and DCA for supply chain and production management: state-of-the-art models and methods pp. 6078-6114

Hoai An Le Thi

Modelling the effects of employee injury risks on injury, productivity and production quality using system dynamics pp. 6115-6129

Mashal Farid and W. Patrick Neumann

Incorporation of resource reliability into critical chain project management buffer sizing pp. 6130-6144

Seyed Ashkan Zarghami, Indra Gunawan, Graciela Corral de Zubielqui and Bassam Baroudi

A dynamic synchronous optimisation method of tool sequence selection and multi-state process models depth distribution for high efficiency machining pp. 6145-6158

Feiyan Han, Chuanwei Zhang, Wu Zhang, Wei Guo and Bin Feng

NP-completeness of cell formation problem with grouping efficacy objective pp. 6159-6169

Mikhail V. Batsyn, Ekaterina K. Batsyna and Ilya S. Bychkov

Research and development spending and technical efficiency: evidence from biotechnology and pharmaceutical sector pp. 6170-6184

Kevin Grant, Roman Matousek, Martin Meyer and Nickolaos G. Tzeremes

Integrated product-process modelling for platform-based co-development pp. 6185-6201

Thomas Ditlev Brunoe, Ann-Louise Andersen, Daniel G.H. Sorensen, Kjeld Nielsen and Mads Bejlegaard

Smart sewing work measurement system using IoT-based power monitoring device and approximation algorithm pp. 6202-6216

Woo-Kyun Jung, Hyungjung Kim, Young-Chul Park, Jae-Won Lee and Sung-Hoon Ahn

The effects of competition on management practices in New Zealand – a study of manufacturing firms pp. 6217-6234

Renu Agarwal, Paul J. Brown, Christopher Bajada, Philip Stevens and Roy Green

Process capability analysis for manufacturing processes based on the truncated data from supplier products pp. 6235-6251

Jun Yang, Fanbing Meng, Shuo Huang and Yanhe Cui

Hybrid spider monkey optimisation algorithm for multi-level planning and scheduling problems of assembly lines pp. 6252-6267

Jabir Mumtaz, Zailin Guan, Lei Yue, Li Zhang and Cong He

Backshoring and improved key manufacturing resources in firms’ home location pp. 6268-6282

Jesús Lampón and Javier González-Benito

Joint optimization of spare parts ordering and age-based preventive replacement pp. 6283-6299

Sofia Panagiotidou

Anticipated rationing policy for inventory systems with two demand classes and backlogging costs pp. 6300-6314

Yi Wang, Sheng Hao Zhang, Sean X. Zhou and Yong Zhang

Metamodel-based simulation optimisation for bed allocation pp. 6315-6335

Xiuxian Wang, Xuran Gong, Na Geng, Zhibin Jiang and Liping Zhou

Worker assignment in dual resource constrained assembly job shops with worker heterogeneity: an assessment by simulation pp. 6336-6349

Matthias Thürer, Haiwen Zhang, Mark Stevenson, Federica Costa and Lin Ma

Impact analysis of setup carryover and crossover on lot sizing problems pp. 6350-6369

Diego Jacinto Fiorotto, Jackeline del Carmen Huaccha Neyra and Silvio Alexandre de Araujo

Fuzzy cognitive maps approach for analysing the domino effect of factors affecting supply chain resilience: a fashion industry case study pp. 6370-6398

Maurizio Bevilacqua, Filippo Emanuele Ciarapica, Giulio Marcucci and Giovanni Mazzuto

Enriching analytics models with domain knowledge for smart manufacturing data analysis pp. 6399-6415

Heng Zhang, Utpal Roy and Yung-Tsun Tina Lee

Volume 58, issue 19, 2020

Technical attribute prioritisation in QFD based on cloud model and grey relational analysis pp. 5751-5768

Xu Wang, Hong Fang and Wenyan Song

An inventory management approximation for estimating aggregated regional food stock levels pp. 5769-5785

Ole Hansen, Hanno Friedrich and Sandra Transchel

Integrated decision-making in reverse logistics: an optimisation of interacting acquisition, grading and disposition processes pp. 5786-5805

Gernot Lechner and Marc Reimann

Robust disassembly line balancing with ambiguous task processing times pp. 5806-5835

Ming Liu, Xin Liu, Feng Chu, Feifeng Zheng and Chengbin Chu

Collaborative mechanisms for sustainability-oriented supply chain initiatives: state of the art, role assessment and research opportunities pp. 5836-5850

Caroline Cloutier, Parnian Oktaei and Nadia Lehoux

Age replacement policy in the case of no data: the effect of Weibull parameter estimation pp. 5851-5869

Fabio Sgarbossa, Ilenia Zennaro, Eleonora Florian and Martina Calzavara

Implications of product upgrading confronting supplier remanufacturing pp. 5870-5892

Zhifeng Qian, Junwu Chai, Hengyu Li, Wei Yan and Hong Chen

Sustainable supply chain flexibility and its relationship to circular economy-target performance pp. 5893-5910

Chunguang Bai, Joseph Sarkis, Fengfu Yin and Yijie Dou

A framework for understanding institutional factors affecting the success and failure of offshoring models in India pp. 5911-5928

Manish Shukla, Kristian Pal and Manoj Kumar Tiwari

The dynamics of reshoring decisions and the role of purchasing pp. 5929-5944

Antonella Moretto, Andrea Stefano Patrucco and Christine Mary Harland

Quantum-inspired ant colony optimisation algorithm for a two-stage permutation flow shop with batch processing machines pp. 5945-5963

Zhen Chen, Xu Zheng, Shengchao Zhou, Chuang Liu and Huaping Chen

Competition and cooperation in a supply chain with an offline showroom under asymmetric information pp. 5964-5979

Mengli Li, Xumei Zhang and Bin Dan

Design and realisation of an efficient environmental assessment method for 3R systems: a case study on engine remanufacturing pp. 5980-6003

Haolan Liao, Neng Shen and Yanzhen Wang

A new medical staff allocation via simulation optimisation for an emergency department in Hong Kong pp. 6004-6023

Wenjie Chen, Hainan Guo and Kwok-Leung Tsui

Cloud manufacturing service composition and optimal selection with sustainability considerations: a multi-objective integer bi-level multi-follower programming approach pp. 6024-6042

Yanxia Wu, Guozhu Jia and Yang Cheng

A two-period model for selection of resilient multi-tier supply portfolio pp. 6043-6060

Tadeusz Sawik

Soft constraint handling for a real-world multiobjective energy distribution problem pp. 6061-6077

Yanyan Zhang, Gary G. Yen and Lixin Tang

Volume 58, issue 18, 2020

Travel time models for a three-dimensional compact AS/RS considering different I/O point policies pp. 5432-5455

Xianhao Xu, Xiaozhen Zhao, Bipan Zou, Yeming (Yale) Gong and Hongwei Wang

Big data analytics business value and firm performance: linking with environmental context pp. 5456-5476

Claudio Vitari and Elisabetta Raguseo

Proposal of a multi-agent model for the sustainable truck scheduling and containers grouping problem in a Road-Rail physical internet hub pp. 5477-5501

Tarik Chargui, Abdelghani Bekrar, Mohamed Reghioui and Damien Trentesaux

DSS approach for heterogeneous parallel machines scheduling considering proximate supply chain constraints pp. 5502-5520

Ahlam Azzamouri, Najat Bara, Selwa Elfirdoussi, Imane Essaadi, Frédéric Fontane and Vincent Giard

Modelling of sustainable food grain supply chain distribution system: a bi-objective approach pp. 5521-5544

D. G. Mogale, Naoufel Cheikhrouhou and Manoj Kumar Tiwari

Multilevel spatial randomness approach for monitoring changes in 3D topographic surfaces pp. 5545-5558

Mejdal A. Alqahtani, Myong K. Jeong and Elsayed A. Elsayed

Ripple effect quantification by supplier risk exposure assessment pp. 5559-5578

Aseem Kinra, Dmitry Ivanov, Ajay Das and Alexandre Dolgui

Single-period assortment and stock-level decisions for dual sales channels with capacity limits and uncertain demand pp. 5579-5600

Joseph Geunes and Yiqiang Su

Leagile supply chain: design drivers and business performance implications pp. 5601-5623

Masih Fadaki, Shams Rahman and Caroline Chan

Multistage risk assessment of direct delivery business from local oil refineries in Sinopec Group based on normal cloud model pp. 5624-5650

Wen Song, Jianjun Zhu, Hehua Wang and Anlin Chang

Robust optimisation of sustainable food grain transportation with uncertain supply and intentional disruptions pp. 5651-5675

Lohithaksha M. Maiyar and Jitesh J. Thakkar

Product line optimisation based on semiparametric choice model pp. 5676-5692

Wei Qi, Xinggang Luo, Yang Yu and Jiafu Tang

Optimum life test plan for Type-I hybrid censored Weibull distributed products sold under general rebate warranty pp. 5693-5706

Jimut Bahan Chakrabarty, Shovan Chowdhury and Soumya Roy

Solving the grocery backroom sizing problem pp. 5707-5720

Maria Pires, Ana Camanho and Pedro Amorim

A multi-objective distribution-free model and method for stochastic disassembly line balancing problem pp. 5721-5737

Junkai He, Feng Chu, Feifeng Zheng, Ming Liu and Chengbin Chu

About tooling capacity for the vulcanising planning decision problem to improve strategic business profit pp. 5738-5749

Federico Trigos and Eduardo Manuel López

Volume 58, issue 17, 2020

Iot based laundry services: an application of big data analytics, intelligent logistics management, and machine learning techniques pp. 5113-5131

Chang Liu, Yongfu Feng, Dongtao Lin, Liang Wu and Min Guo

A robust optimization approach for integrated steel production and batch delivery scheduling with uncertain rolling times and deterioration effect pp. 5132-5154

Min Kong, Jun Pei, Jin Xu, Xinbao Liu, Xiaoyu Yu and Panos M. Pardalos

Multi-objective particle swarm optimisation based integrated production inventory routing planning for efficient perishable food logistics operations pp. 5155-5174

Felix T.S. Chan, Z.X. Wang, A. Goswami, A. Singhania and M.K. Tiwari

Structural-aware simulation analysis of supply chain resilience pp. 5175-5195

Wen Jun Tan, Wentong Cai and Allan N. Zhang

Service profit chain and throughput orientation: a manager-employee-customer triad perspective in services pp. 5196-5217

Pankaj C. Patel, Gurjeet Kaur Sahi, Mahesh Gupta and Jayanth Jayaram

Optimisation of the broiler production supply chain pp. 5218-5237

Elisabeth Brevik, Anna Ø. Lauen, Maria C. B. Rolke, Kjetil Fagerholt and Jone R. Hansen

Digital twin of composite assembly manufacturing process pp. 5238-5252

Wilma Polini and Andrea Corrado

Using simulation-based system dynamics and genetic algorithms to reduce the cash flow bullwhip in the supply chain pp. 5253-5279

Ehsan Badakhshan, Paul Humphreys, Liam Maguire and Ronan McIvor

A novel cloud manufacturing service composition platform enabled by Blockchain technology pp. 5280-5298

Ehsan Aghamohammadzadeh and Omid Fatahi Valilai

Modelling and solving spare parts supply chain network design problems pp. 5299-5319

Francisco J. Tapia-Ubeda, Pablo A. Miranda, Irene Roda, Marco Macchi and Orlando Durán

Extracting supply chain maps from news articles using deep neural networks pp. 5320-5336

Pascal Wichmann, Alexandra Brintrup, Simon Baker, Philip Woodall and Duncan McFarlane

Optimal order picker routing in a conventional warehouse with two blocks and arbitrary starting and ending points of a tour pp. 5337-5358

Makusee Masae, Christoph H. Glock and Panupong Vichitkunakorn

Automated digital cause-and-effect diagrams to assist causal analysis in problem-solving: a data-driven approach pp. 5359-5379

Zhaoguang Xu and Yanzhong Dang

The impact of supply chain disruption on the closed-loop supply chain configuration profit: a study of sourcing policies pp. 5380-5400

Jighyasu Gaur, Mehdi Amini and Arza Keshava Rao

Production scheduling in the context of Industry 4.0: review and trends pp. 5401-5431

Manuel Parente, Gonçalo Figueira, Pedro Amorim and Alexandra Marques

Volume 58, issue 16, 2020

Modelling and design for a shuttle-based storage and retrieval system pp. 4808-4828

Yingying Wu, Chen Zhou, Wenkai Ma and Xiang T. R. Kong

Flexible strategies under supply disruption: the interplay between contingent sourcing and responsive pricing pp. 4829-4850

Yanjun Wang and Yugang Yu

Risk analysis of the agri-food supply chain: A multi-method approach pp. 4851-4876

Guoqing Zhao, Shaofeng Liu, Carmen Lopez, Huilan Chen, Haiyan Lu, Sachin Kumar Mangla and Sebastian Elgueta

Credit guarantee mechanism with information asymmetry: a single sourcing model pp. 4877-4893

Cheng-Feng Wu, Mahdi Fathi, David M. Chiang and Panagote M. Pardalos

Empirical examination of critical failure factors of continuous improvement deployments: stage-wise results and a contingency theory perspective pp. 4894-4915

Vijaya Sunder M and Anupama Prashar

Interactive AR-assisted product disassembly sequence planning (ARDIS) pp. 4916-4931

M. M. L. Chang, A. Y. C. Nee and S. K. Ong

The choice of the government green subsidy scheme: innovation subsidy vs. product subsidy pp. 4932-4946

Yina Li, Yang Tong, Fei Ye and Jiajia Song

Towards data-driven approaches in manufacturing: an architecture to collect sequences of operations pp. 4947-4963

Ashfaq Farooqui, Kristofer Bengtsson, Petter Falkman and Martin Fabian

Deep learning with long short-term memory networks and random forests for demand forecasting in multi-channel retail pp. 4964-4979

Sushil Punia, Konstantinos Nikolopoulos, Surya Prakash Singh, Jitendra K. Madaan and Konstantia Litsiou

A linearisation approach to the stochastic dynamic capacitated lotsizing problem with sequence-dependent changeovers pp. 4980-5005

Niels De Smet, Stefan Minner, El-Houssaine Aghezzaf and Bram Desmet

Industry 4.0 and resilience in the supply chain: a driver of capability enhancement or capability loss? pp. 5006-5019

Peter Ralston and Jennifer Blackhurst

Designing lean value streams in the fourth industrial revolution era: proposition of technology-integrated guidelines pp. 5020-5033

Guilherme Luz Tortorella, Ninad Pradhan, Enrique Macias de Anda, Samuel Trevino Martinez, Rupy Sawhney and Maneesh Kumar

Information and digital technologies of Industry 4.0 and Lean supply chain management: a systematic literature review pp. 5034-5061

Miguel Núñez-Merino, Juan Manuel Maqueira-Marín, José Moyano-Fuentes and Pedro José Martínez-Jurado

Spatial arrangement using deep reinforcement learning to minimise rearrangement in ship block stockyards pp. 5062-5076

Byeongseop Kim, Yongkuk Jeong and Jong Gye Shin

A traveling salesman problem with time windows for the last mile delivery in online shopping pp. 5077-5088

Li Jiang, Mohamed Dhiaf, Junfeng Dong, Changyong Liang and Shuping Zhao

Towards augmenting cyber-physical-human collaborative cognition for human-automation interaction in complex manufacturing and operational environments pp. 5089-5111

Jianxin (Roger) Jiao, Feng Zhou, Nagi Z. Gebraeel and Vincent Duffy

Volume 58, issue 15, 2020

Automated order picking systems and the links between design and performance: a systematic literature review pp. 4489-4505

Yasmeen Jaghbeer, Robin Hanson and Mats Ingemar Johansson

Status of engineering change management in the engineer-to-order production environment: insights from a multiple case study pp. 4506-4528

Natalia Iakymenko, Anita Romsdal, Erlend Alfnes, Marco Semini and Jan Ola Strandhagen

Co-procurement: making the most of collaborative procurement pp. 4529-4540

Jafar Rezaei, Nadia Pourmohammadzia, Charalampos Dimitropoulos, Lori Tavasszy and Mark Duinkerken

A systematic literature review of the capabilities and performance metrics of supply chain resilience pp. 4541-4566

Yu Han, Woon Kian Chong and Dong Li

A paler shade of green: implications of green product deletion on supply chains pp. 4567-4588

Qingyun Zhu, Purvi Shah and Joseph Sarkis

Effects of green supply chain integration and green innovation on environmental and cost performance pp. 4589-4609

Chee Yew Wong, Christina W.Y. Wong and Sakun Boon-itt

The potential of emergent disruptive technologies for humanitarian supply chains: the integration of blockchain, Artificial Intelligence and 3D printing pp. 4610-4630

Oscar Rodríguez-Espíndola, Soumyadeb Chowdhury, Ahmad Beltagui and Pavel Albores

A roadmap for Assembly 4.0: self-configuration of fixed-position assembly islands under Graduation Intelligent Manufacturing System pp. 4631-4646

Daqiang Guo, Ray Y. Zhong, Shiquan Ling, Yiming Rong and George Q. Huang

Open manufacturing: a design-for-resilience approach pp. 4647-4658

Andrew Kusiak

Hybrid make-to-stock and make-to-order systems: a taxonomic review pp. 4659-4688

Kay Peeters and Henny van Ooijen

Nature inspired supply chain solutions: definitions, analogies, and future research directions pp. 4689-4715

Nazli Turken, Vincent Cannataro, Avinash Geda and Ashutosh Dixit

Ageing and human-system errors in manufacturing: a scoping review pp. 4716-4740

Valentina Di Pasquale, Salvatore Miranda and W. Patrick Neumann

Order allocation in purchasing management: a review of state-of-the-art studies from a supply chain perspective pp. 4741-4766

Valentina Di Pasquale, Maria Elena Nenni and Stefano Riemma

Inspection procedures in manufacturing processes: recent studies and research perspectives pp. 4767-4788

Gianfranco Genta, Maurizio Galetto and Fiorenzo Franceschini

A systematic literature review to explore traceability and lifecycle relationship pp. 4789-4807

Angelo Corallo, Maria Elena Latino, Marta Menegoli and Pierpaolo Pontrandolfo

Volume 58, issue 14, 2020

Energy-efficient frozen food transports: the Refrigerated Routing Problem pp. 4164-4181

Antonella Meneghetti and Sara Ceschia

Environmental issue in an integrated production and maintenance control of unreliable manufacturing/remanufacturing systems pp. 4182-4200

Nadia Ndhaief, Rezg Nidhal, Adnène Hajji and Olivier Bistorin

Optimisation of the multi-depots pick-up and delivery problems with time windows and multi-vehicles using PSO algorithm pp. 4201-4214

Imen Harbaoui Dridi, Essia Ben Alaïa, Pierre Borne and Hanen Bouchriha

Option contracts for online celebrities as retailers in supply chains pp. 4215-4232

Zijie Tang, Desheng Dash Wu and Alexandre Dolgui

Applicability of Demand-Driven MRP in a complex manufacturing environment pp. 4233-4245

Angela Patricia Velasco Acosta, Christian Mascle and Pierre Baptiste

Sustainable disassembly line balancing model based on triple bottom line pp. 4246-4266

Yigit Kazancoglu and Yesim Deniz Ozkan-Ozen

Horizontal collaboration: opportunities for improved logistics planning pp. 4267-4284

William Ferrell, Kimberly Ellis, Phil Kaminsky and Chase Rainwater

The moderating role of temporary work on the performance of lean manufacturing systems pp. 4285-4305

Cristina Sancha, Frank Wiengarten, Annachiara Longoni and Mark Pagell

Design methodology for production systems retrofit in SMEs pp. 4306-4324

Marcos Pueo, Jorge Santolaria, Raquel Acero and Jorge Sierra-Pérez

Development of a decision support framework for sustainable freight transport system evaluation using rough numbers pp. 4325-4351

Morteza Yazdani, Dragan Pamucar, Prasenjit Chatterjee and Shankar Chakraborty

How to design a dynamic feed-in tariffs mechanism for renewables – a real options approach pp. 4352-4366

Li Li, Junqi Liu, Lei Zhu and Xiao-Bing Zhang

Travel time models for the rack-moving mobile robot system pp. 4367-4385

Kun Wang, Yiming Yang and Ruixue Li

The impact of human consideration, schedule types and product mix on scheduling objectives for unpaced mixed-model assembly lines pp. 4386-4405

Frederik Ferid Ostermeier

A hybrid artificial bee colony algorithm for flexible job shop scheduling with worker flexibility pp. 4406-4420

Guiliang Gong, Raymond Chiong, Qianwang Deng and Xuran Gong

Theory of constraints based mafia offer for supply chains of deteriorating products pp. 4421-4449

Harshal Lowalekar and Sumanta Basu

An optimal integrated lot sizing and maintenance strategy for multi-machines system with energy consumption pp. 4450-4470

Zied Hajej and Nidhal Rezg

Design of delayed reconfigurable manufacturing system based on part family grouping and machine selection pp. 4471-4488

Sihan Huang and Yan Yan

Volume 58, issue 13, 2020

Flexible work-in-process production system in supply chain management under quality improvement pp. 3821-3838

Mitali Sarkar and Byung Do Chung

The integration of resource allocation and time buffering for bi-objective robust project scheduling pp. 3839-3854

Yangyang Liang, Nanfang Cui, Xuejun Hu and Erik Demeulemeester

A general corridor method-based approach for capacitated facility location pp. 3855-3880

Marco Caserta and Stefan Voß

Performance evaluation of flow lines with non-identical and unreliable parallel machines and finite buffers pp. 3881-3904

Alexandros Diamantidis, Jun-Ho Lee, Chrissoleon T. Papadopoulos, Jingshan Li and Cathal Heavey

More MILP models for hybrid flow shop scheduling problem and its extended problems pp. 3905-3930

Leilei Meng, Chaoyong Zhang, Xinyu Shao, Biao Zhang, Yaping Ren and Wenwen Lin

Performance degradation assessment of rolling bearing based on convolutional neural network and deep long-short term memory network pp. 3931-3943

Zheng Wang, Hongzhan Ma, Hansi Chen, Bo Yan and Xuening Chu

The scheduler’s balancing act of sensing and reacting: a behavioural perspective on scheduling pp. 3944-3955

José Antonio Larco Martinelli, Jan Fransoo, Amir Gharehgozli and Vincent Wiers

On tandem stochastic networks with time-deteriorating product quality pp. 3956-3964

Yael Perlman and Uri Yechiali

Non-approximability of the single crane container transhipment problem pp. 3965-3975

Erwin Pesch and Katarzyna Anna Kuzmicz

Dynamic pricing for remanufacturing within socially environmental incentives pp. 3976-3997

Zhaofu Hong, Yunrong Zhang, Yugang Yu and Chengbin Chu

Rolling Kanban: a new visual tool to schedule family batch manufacturing processes with kanban pp. 3998-4014

Marcello Braglia, Roberto Gabbrielli and Leonardo Marrazzini

Long-term predictive opportunistic replacement optimisation for a small multi-component system using partial condition monitoring data to date pp. 4015-4032

Lei Xiao, Tangbin Xia, Ershun Pan and Xinghui Zhang

Multi-objective imperfect preventive maintenance optimisation with NSGA-II pp. 4033-4049

Chun Su and Yang Liu

Logistics optimisation of slab pre-marshalling problem in steel industry pp. 4050-4070

Peixin Ge, Ying Meng, Jiyin Liu, Lixin Tang and Ren Zhao

Joint decision-making of production and maintenance in mixed model assembly systems with delayed differentiation configurations pp. 4071-4085

Weihong Guo and Xi Gu

A method combining rules with genetic algorithm for minimizing makespan on a batch processing machine with preventive maintenance pp. 4086-4102

Jingying Huang, Liya Wang and Zhibin Jiang

Energy-efficient scheduling for multi-objective two-stage flow shop using a hybrid ant colony optimisation algorithm pp. 4103-4120

Xu Zheng, Shengchao Zhou, Rui Xu and Huaping Chen

Effectiveness of nervousness reduction policies when capacity is constrained pp. 4121-4137

Sukran N. Atadeniz and Sri V. Sridharan

Reconfigurable supply chain: the X-network pp. 4138-4163

Alexandre Dolgui, Dmitry Ivanov and Boris Sokolov

Volume 58, issue 12, 2020

The use of finite loading to guide short-term capacity adjustments in make-to-order job shops: an assessment by simulation pp. 3554-3569

Matthias Thürer and Mark Stevenson

Production and subcontracting control for an unreliable manufacturing system with setups pp. 3570-3588

M. Assid, A. Gharbi and A. Hajji

Improved imperialist competitive algorithms for rebalancing multi-objective two-sided assembly lines with space and resource constraints pp. 3589-3617

Yahui Zhang, Xiaofeng Hu and Chuanxun Wu

Mitigating supply disruption with a backup supplier under uncertain demand: competition vs. cooperation pp. 3618-3649

Tulika Chakraborty, Satyaveer S. Chauhan and Mustapha Ouhimmou

Learning organisation and lean production: an empirical research on their relationship pp. 3650-3666

Guilherme Luz Tortorella, Diego Fettermann, Paulo A. Cauchick Miguel and Rapinder Sawhney

Methodology for integrated management system improvement: combining costs deployment and value stream mapping pp. 3667-3685

Jaouad Abisourour, Mohsine Hachkar, Badia Mounir and Abdelmajid Farchi

A new DEA common-weight multi-criteria decision-making approach for technology selection pp. 3686-3700

Junfei Chu, Jie Wu, Chengbin Chu and Ming Liu

Progressive modelling of feature-centred product family development pp. 3701-3723

Haizhu Zhang, Shengfeng Qin, Rong Li, Yisheng Zou and Guofu Ding

Comparison between rule- and optimization-based workload control concepts: a simulation optimization approach pp. 3724-3743

Stefan Haeussler and Pia Netzer

On two-tier healthcare system under capacity constraint pp. 3744-3764

Wuhua Chen, Zhe George Zhang and Xiaohong Chen

An architecture for IoT-enabled intelligent process-aware cloud production platform: a case study in a networked cloud clinical laboratory pp. 3765-3780

Mohammad Reza Rasouli

Remanufacturing-oriented process planning and scheduling: mathematical modelling and evolutionary optimisation pp. 3781-3799

Guiliang Gong, Qianwang Deng, Raymond Chiong, Xuran Gong, Hezhiyuan Huang and Wenwu Han

A rolling horizon simulation approach for managing demand with lead time variability pp. 3800-3820

Francisco Campuzano-Bolarín, Josefa Mula, Manuel Díaz-Madroñero and Álvar-Ginés Legaz-Aparicio

Volume 58, issue 11, 2020

Operational strategies for seru production system: a bi-objective optimisation model and solution methods pp. 3195-3219

Ömer Faruk Yılmaz

A fast branch, bound and remember algorithm for disassembly line balancing problem pp. 3220-3234

Zixiang Li, Zeynel Abidin Çil, Süleyman Mete and Ibrahim Kucukkoc

Trade-off balancing between maximum and total completion times for no-wait flow shop production pp. 3235-3251

Honghan Ye, Wei Li and Barrie R. Nault

‘A blessing in disguise’ or ‘as if it wasn’t hard enough already’: reciprocal and aggravate vulnerabilities in the supply chain pp. 3252-3262

Dmitry Ivanov

An energy-efficient scheduling and rescheduling method for production and logistics systems† pp. 3263-3283

Maroua Nouiri, Abdelghani Bekrar and Damien Trentesaux

Ripple effect modelling of supplier disruption: integrated Markov chain and dynamic Bayesian network approach pp. 3284-3303

Seyedmohsen Hosseini, Dmitry Ivanov and Alexandre Dolgui

Influence of logistic service level on multichannel decision of a two-echelon supply chain pp. 3304-3329

Bo Yan, Zhuo Chen, Xinni Wang and Zijie Jin

Supply chain data analytics for predicting supplier disruptions: a case study in complex asset manufacturing pp. 3330-3341

Alexandra Brintrup, Johnson Pak, David Ratiney, Tim Pearce, Pascal Wichmann, Philip Woodall and Duncan McFarlane

What is the role of value-added service in a remanufacturing closed-loop supply chain? pp. 3342-3361

Xianpei Hong, Lan Wang, Yeming Gong and Wanying (Amanda) Chen

Intelligent scheduling of discrete automated production line via deep reinforcement learning pp. 3362-3380

Daming Shi, Wenhui Fan, Yingying Xiao, Tingyu Lin and Chi Xing

Blockchain technology for enhancing swift-trust, collaboration and resilience within a humanitarian supply chain setting pp. 3381-3398

Rameshwar Dubey, Angappa Gunasekaran, David J. Bryde, Yogesh K. Dwivedi and Thanos Papadopoulos

Why corporate groups care about company standards pp. 3399-3414

Knut Blind and Jo-Ann Müller

Transition to the circular economy: the story of four case companies pp. 3415-3422

Patricia van Loon and Luk N. Van Wassenhove

Investigating the link between transaction and computational costs in a blockchain environment pp. 3423-3436

Abdul Jabbar and Samir Dani

The economic lot scheduling problem: a content analysis pp. 3437-3454

Fabian G. Beck and Christoph H. Glock

Review of supplier diversification and pricing strategies under random supply and demand pp. 3455-3487

Amirmohsen Golmohammadi and Elkafi Hassini

Supply chain collaboration in the presence of disruptions: a literature review pp. 3488-3507

Linh Nguyen Khanh Duong and Josephine Chong

Disruption risks in supply chain management: a literature review based on bibliometric analysis pp. 3508-3526

Song Xu, Xiaotong Zhang, Lipan Feng and Wenting Yang

Quantitative approaches for the integration of production and distribution planning in the supply chain: a systematic literature review pp. 3527-3553

Ramesh Kumar, L. Ganapathy, Ravindra Gokhale and Manoj Kumar Tiwari

Volume 58, issue 10, 2020

Viability of intertwined supply networks: extending the supply chain resilience angles towards survivability. A position paper motivated by COVID-19 outbreak pp. 2904-2915

Dmitry Ivanov and Alexandre Dolgui

Combination of Lean value-oriented conception and facility layout design for even more significant efficiency improvement and cost reduction pp. 2916-2936

György Kovács

Optimal cost design of flow lines with reconfigurable machines for batch production pp. 2937-2952

Olga Battaïa, Alexandre Dolgui and Nikolai Guschinsky

The relevance of Industry 4.0 and its relationship with moving manufacturing out, back and staying at home pp. 2953-2973

Jan Stentoft and Christopher Rajkumar

Configuration design of scalable reconfigurable manufacturing systems for part family pp. 2974-2996

Shokraneh K. Moghaddam, Mahmoud Houshmand, Kazuhiro Saitou and Omid Fatahi Valilai

A practical framework for supplier selection decisions with an application to the automotive sector pp. 2997-3014

Hengameh Hadian, S. Chahardoli, Amir-Mohammad Golmohammadi and Ali Mostafaeipour

Machine diagnostic service centre design under imperfect diagnosis with uncertain error cost consideration pp. 3015-3035

Mingyao Sun, Feng Wu and Sisi Zhao

Modelling and optimisation of a two-server queue with multiple vacations and working breakdowns pp. 3036-3048

Dong-Yuh Yang, Yi-Hsuan Chen and Chia-Huang Wu

Optimal service parts contract with multiple response times and on-site spare parts pp. 3049-3065

Daniel Y. Mo, Yue Wang, Lawrence C. Leung and Mitchell M. Tseng

A supplier performance evaluation framework using single and bi-objective DEA efficiency modelling approach: individual and cross-efficiency perspective pp. 3066-3089

Mohit Goswami and Abhijeet Ghadge

Modelling, analysis and improvement of an integrated chance-constrained model for level of repair analysis and spare parts supply control pp. 3090-3109

Weimiao Liu, Kanglin Liu and Tianhu Deng

Construction and fuzzy hypothesis testing of Taguchi Six Sigma quality index pp. 3110-3125

Kuen-Suan Chen and Tsang-Chuan Chang

Topological rationality of supply chain networks pp. 3126-3149

Supun Perera, Dharshana Kasthurirathna, Michael Bell and Michiel Bliemer

A Bayesian approach to set the tolerance limits for a statistical project control method pp. 3150-3163

Zhi Chen, Erik Demeulemeester, Sijun Bai and Yuntao Guo

A framework for modelling, control and supervision of poultry farming pp. 3164-3179

Mainara Cristina Lorencena, Luiz Fernando Puttow Southier, Dalcimar Casanova, Richardson Ribeiro and Marcelo Teixeira

Workload control and optimised order release: an assessment by simulation pp. 3180-3193

Nuno O. Fernandes, Matthias Thürer, Tatiana M. Pinho, Pedro Torres and Sílvio Carmo-Silva

Volume 58, issue 9, 2020

Automatic design of scheduling policies for dynamic flexible job shop scheduling via surrogate-assisted cooperative co-evolution genetic programming pp. 2561-2580

Yong Zhou, Jian-jun Yang and Zhuang Huang

A practical assessment of risk-averse approaches in production lot-sizing problems pp. 2581-2603

Douglas Alem, Fabricio Oliveira and Miguel Carrión Ruiz Peinado

Hybrid algorithm based on improved extended shifting bottleneck procedure and GA for assembly job shop scheduling problem pp. 2604-2625

Fei Shi, Shikui Zhao and Yue Meng

Hybrid simulated annealing and reduced variable neighbourhood search for an aircraft scheduling and parking problem pp. 2626-2646

Shuang Zheng, Zhen Yang, Zhengwen He, Nengmin Wang, Chengbin Chu and Haiyang Yu

Scheduling the operations of a double-load crane in slab yards pp. 2647-2657

Guodong Zhao, Jiyin Liu and Yun Dong

Optimisation of the aggregation and execution rates for intersecting operation sets: an example of machining process design pp. 2658-2676

Alexandre Dolgui, Genrikh Levin and Boris Rozin

Multi-product continuous plant scheduling: combination of decomposition, genetic algorithm, and constructive heuristic pp. 2677-2695

Pavel Borisovsky, Anton Eremeev and Josef Kallrath

Large neighbourhood search based on mixed integer programming and ant colony optimisation for car sequencing pp. 2696-2711

Dhananjay Thiruvady, Kerri Morgan, Amiza Amir and Andreas T. Ernst

The constrained two-dimensional guillotine cutting problem with defects: an ILP formulation, a Benders decomposition and a CP-based algorithm pp. 2712-2729

Mateus Martin, Pedro H.D.B. Hokama, Reinaldo Morabito and Pedro Munari

Artificial intelligence in manufacturing and logistics systems: algorithms, applications, and case studies pp. 2730-2731

Chen-Fu Chien, Stéphane Dauzère-Pérès, Woonghee Tim Huh, Young Jae Jang and James R. Morrison

Reliability analysis of chatter stability for milling process system with uncertainties based on neural network and fourth moment method pp. 2732-2750

Congying Deng, Jianguo Miao, Ying Ma, Bo Wei and Yi Feng

Big data driven jobs remaining time prediction in discrete manufacturing system: a deep learning-based approach pp. 2751-2766

Weiguang Fang, Yu Guo, Wenhe Liao, Karthik Ramani and Shaohua Huang

Bi-objective mathematical model and improved algorithm for optimisation of welding shop scheduling problem pp. 2767-2783

Yunqing Rao, Ronghua Meng, Jing Zha and Xiaofei Xu

Deep reinforcement learning for selecting demand forecast models to empower Industry 3.5 and an empirical study for a semiconductor component distributor pp. 2784-2804

Chen-Fu Chien, Yun-Siang Lin and Sheng-Kai Lin

A generalised uncertain decision tree for defect classification of multiple wafer maps pp. 2805-2821

Byunghoon Kim, Young-Seon Jeong, Seung Hoon Tong and Myong K. Jeong

A deep learning approach for the dynamic dispatching of unreliable machines in re-entrant production systems pp. 2822-2840

Cheng-Hung Wu, Fang-Yi Zhou, Chi-Kang Tsai, Cheng-Juei Yu and Stéphane Dauzère-Pérès

Cyber-based design for additive manufacturing using artificial neural networks for Industry 4.0 pp. 2841-2861

Hietam Elhoone, Tianyang Zhang, Mohd Anwar and Salil Desai

Detection of interferences in an additive manufacturing process: an experimental study integrating methods of feature selection and machine learning pp. 2862-2884

Darko Stanisavljevic, David Cemernek, Heimo Gursch, Günter Urak and Gernot Lechner

Fuzzy belief propagation in constrained Bayesian networks with application to maintenance decisions pp. 2885-2903

Ke Wang, Yan Yang, Jian Zhou and Mark Goh

Volume 58, issue 8, 2020

Improved evolutionary algorithm for parallel batch processing machine scheduling in additive manufacturing pp. 2263-2282

Jianming Zhang, Xifan Yao and Yun Li

An energy-efficient two-stage hybrid flow shop scheduling problem in a glass production pp. 2283-2314

Shijin Wang, Xiaodong Wang, Feng Chu and Jianbo Yu

Manufacturing strategies for the ecosystem-based manufacturing system in the context of 3D printing pp. 2315-2334

Ke Rong, Yong Lin, Jiang Yu and Yue Zhang

A radius compensation method of barrel tool based on macro variables in five-axis flank machining of sculptured surfaces pp. 2335-2351

Rufeng Xu, Xun Li, Guangming Zheng, Xiang Cheng and Yebing Tian

Enhancing smart shop floor management with ubiquitous augmented reality pp. 2352-2367

X. Wang, A.W.W. Yew, S.K. Ong and A.Y.C. Nee

Determinants of consumers’ remanufactured products purchase intentions: Evidence from China pp. 2368-2383

Shanyong Wang, Jing Wang, Feng Yang, Jun Li and Jian Song

Determinants of information and digital technology implementation for smart manufacturing pp. 2384-2405

Morteza Ghobakhloo

Modelling of carbon utilisation efficiency and its application in milling parameters optimisation pp. 2406-2420

Zhaohui Deng, Lishu Lv, Wenliang Huang, Linlin Wan and Shichun Li

A framework for operator – workstation interaction in Industry 4.0 pp. 2421-2432

Maya Golan, Yuval Cohen and Gonen Singer

Special issue on present and future of production in Asia Pacific countries pp. 2433-2435

Katsuhiko Takahashi, Kazuyoshi Ishii, Chin-Yin Huang, Ilkyeong Moon, Bhaskar Bhandarkar, The Jin Ai and Tak Nam Wong

A systematic review of China’s belt and road initiative: implications for global supply chain management pp. 2436-2453

Matthias Thürer, Ivan Tomašević, Mark Stevenson, Constantin Blome, Steven Melnyk, Hing Kai Chan and George Q. Huang

An integrated DEMATEL-MMDE-ISM based approach for analysing the barriers of IoT implementation in the manufacturing industry pp. 2454-2476

Rajdeep Singh and Neeraj Bhanot

Relational analysis model of weather conditions and sales patterns based on nonnegative tensor factorization pp. 2477-2489

Sei Okayama, Haruka Yamashita, Kenta Mikawa, Masayuki Goto and Tomohiro Yoshikai

Integrated decision support framework for distribution network design pp. 2490-2509

Giuseppe Timperio, Sunil Tiwari, José Manuel Gaspar Sánchez, Rafael Adrián García Martín and Robert de Souza

Moral hazard problem and collaborative coordination in supply chain with capacity reservation contract pp. 2510-2526

Yasuhiko Takemoto and Ikuo Arizono

Profit-oriented distributionally robust chance constrained flowshop scheduling considering credit risk pp. 2527-2549

Ming Liu, Xin Liu, Feng Chu, Feifeng Zheng and Chengbin Chu

Variable stage-independent double sampling plan with screening for acceptance quality loss limit inspection scheme pp. 2550-2559

Ikuo Arizono, Kazunori Yoshimoto and Ryosuke Tomohiro

Volume 58, issue 7, 2020

Simulation in the design and operation of manufacturing systems: state of the art and new trends pp. 1927-1949

Dimitris Mourtzis

Incorporating risk aversion and fairness considerations into procurement and distribution decisions in a supply chain pp. 1950-1967

Jin Tao, Lusheng Shao, Zhimin Guan, William Ho and Srinivas Talluri

Distribution planning for multi-echelon networks considering multiple sourcing and lateral transshipments pp. 1968-1986

Mehdi Firoozi, M. Zied Babai, Walid Klibi and Yves Ducq

A novel model for optimisation of logistics and manufacturing operation service composition in Cloud manufacturing system focusing on cloud-entropy pp. 1987-2015

Ehsan Aghamohammadzadeh, Mahsa Malek and Omid Fatahi Valilai

Optimal advertising outsourcing strategy with different effort levels and uncertain demand pp. 2016-2035

Yue Xie, Wanhua He, Wai-Ki Ching, Allen H. Tai, Wai-Hung Ip, Kai-Leung Yung and Na Song

Absorptive and desorptive capacity configurations in supply chains: An inverted U-shaped relationship pp. 2036-2053

María Isabel Roldán Bravo, Mark Stevenson, Antonia Ruiz Moreno and Francisco Javier Lloréns Montes

Blockchain in transport and logistics – paradigms and transitions pp. 2054-2062

Lenny Koh, Alexandre Dolgui and Joseph Sarkis

Blockchain applications in supply chains, transport and logistics: a systematic review of the literature pp. 2063-2081

Mehrdokht Pournader, Yangyan Shi, Stefan Seuring and S.C. Lenny Koh

Blockchain in global supply chains and cross border trade: a critical synthesis of the state-of-the-art, challenges and opportunities pp. 2082-2099

Yanling Chang, Eleftherios Iakovou and Weidong Shi

Unearthing the determinants of Blockchain adoption in supply chain management pp. 2100-2123

Lai-Wan Wong, Garry Wei-Han Tan, Voon-Hsien Lee, Keng-Boon Ooi and Amrik Sohal

Distributed ledger technology in supply chains: a transaction cost perspective pp. 2124-2141

Dominik Roeck, Henrik Sternberg and Erik Hofmann

A supply chain transparency and sustainability technology appraisal model for blockchain technology pp. 2142-2162

Chunguang Bai and Joseph Sarkis

The value of Blockchain technology implementation in international trades under demand volatility risk pp. 2163-2183

Jiho Yoon, Srinivas Talluri, Hakan Yildiz and Chwen Sheu

Blockchain-oriented dynamic modelling of smart contract design and execution in the supply chain pp. 2184-2199

Alexandre Dolgui, Dmitry Ivanov, Semyon Potryasaev, Boris Sokolov, Marina Ivanova and Frank Werner

Blockchain-based ubiquitous manufacturing: a secure and reliable cyber-physical system pp. 2200-2221

Ali Vatankhah Barenji, Zhi Li, W. M. Wang, George Q. Huang and David A. Guerra-Zubiaga

A blockchain-based approach for a multi-echelon sustainable supply chain pp. 2222-2241

V. K. Manupati, Tobias Schoenherr, M. Ramkumar, Stephan M. Wagner, Sai Krishna Pabba and R. Inder Raj Singh

Integrated innovative product design and supply chain tactical planning within a blockchain platform pp. 2242-2262

Sajjad Rahmanzadeh, Mir Saman Pishvaee and Mohammad Reza Rasouli

Volume 58, issue 6, 2020

Scopus scientific mapping production in industry 4.0 (2011–2018): a bibliometric analysis pp. 1605-1627

Liane Mahlmann Kipper, Leonardo Bertolin Furstenau, Daniel Hoppe, Rejane Frozza and Sandra Iepsen

Minimising total tardiness for the identical parallel machine scheduling problem with splitting jobs and sequence-dependent setup times pp. 1628-1643

Jae-Gon Kim, Seokwoo Song and BongJoo Jeong

Impacts of Industry 4.0 technologies on Lean principles pp. 1644-1661

Frédéric Rosin, Pascal Forget, Samir Lamouri and Robert Pellerin

Assessing relations between Circular Economy and Industry 4.0: a systematic literature review pp. 1662-1687

Paolo Rosa, Claudio Sassanelli, Andrea Urbinati, Davide Chiaroni and Sergio Terzi

Pricing and warranty decisions in a two-period closed-loop supply chain pp. 1688-1704

Juan Tang, Bang-Yi Li, Kevin W. Li, Zhi Liu and Jun Huang

A GIS-based green supply chain model for assessing the effects of carbon price uncertainty on plastic recycling pp. 1705-1723

Hongtao Ren, Wenji Zhou, Ying Guo, Lizhen Huang, Yongping Liu, Yadong Yu, Liyun Hong and Tieju Ma

Supply chain network design under the risk of uncertain disruptions pp. 1724-1740

Sen Yan and Xiaoyu Ji

Mathematical formulation and heuristic algorithms for optimisation of auto-part milk-run logistics network considering forward and reverse flow of pallets pp. 1741-1775

Farivar Ranjbaran, Ali Husseinzadeh Kashan and Abolfazl Kazemi

The price-setting newsvendor: review and extensions pp. 1776-1804

Gregory D. DeYong

Supply chain coordination under information asymmetry: a review pp. 1805-1834

Mohammadali Vosooghidizaji, Atour Taghipour and Béatrice Canel-Depitre

Methods for mitigating disruptions in complex supply chain structures: a systematic literature review pp. 1835-1856

Tobias Bier, Anne Lange and Christoph H. Glock

After-sales services and aftermarket support: a systematic review, theory and future research directions pp. 1857-1892

Christopher M. Durugbo

Social media in operations and supply chain management: State-of-the-Art and research directions pp. 1893-1925

Shupeng Huang, Andrew Potter and Daniel Eyers

Volume 58, issue 5, 2020

Does the ripple effect influence the bullwhip effect? An integrated analysis of structural and operational dynamics in the supply chain pp. 1285-1301

Alexandre Dolgui, Dmitry Ivanov and Maxim Rozhkov

Data-driven process redesign: anticipatory shipping in agro-food supply chains pp. 1302-1318

Nguyen Quoc Viet, Behzad Behdani and Jacqueline Bloemhof-Ruwaard

Industry 4.0 and lean manufacturing practices for sustainable organisational performance in Indian manufacturing companies pp. 1319-1337

Sachin Kamble, Angappa Gunasekaran and Neelkanth C. Dhone

A multi-objective model for risk mitigating in supply chain design pp. 1338-1361

Vahid Nooraie, Mahdi Fathi, Masoud Narenji, Mahour M. Parast, Panagote M. Pardalos and P. M. Stanfield

Procurement decisions and information sharing under multi-tier disruption risk in a supply chain pp. 1362-1383

Jiho Yoon, Srinivas Talluri and Claudia Rosales

Identification of critical success factors, risks and opportunities of Industry 4.0 in SMEs pp. 1384-1400

Alexandre Moeuf, Samir Lamouri, Robert Pellerin, Simon Tamayo-Giraldo, Estefania Tobon-Valencia and Romain Eburdy

Design of balanced energy savings performance contracts pp. 1401-1424

Barış Tan

Industry 4.0: a supply chain innovation perspective pp. 1425-1441

Gerd J. Hahn

A review of operations management literature: a data-driven approach pp. 1442-1461

Andrew Manikas, Lynn Boyd, Jian (Jeff) Guan and Kyle Hoskins

Sustainable manufacturing in Industry 4.0: an emerging research agenda pp. 1462-1484

Carla Gonçalves Machado, Mats Peter Winroth and Elias Hans Dener Ribeiro da Silva

Green supply chain contracts with eco-labels issued by the sales platform: profitability and environmental implications pp. 1485-1504

Xiaolong Guo, Lihong Cheng and Jie Liu

Industry 4.0 as an enabler of sustainability diffusion in supply chain: an analysis of influential strength of drivers in an emerging economy pp. 1505-1521

Sunil Luthra, Anil Kumar, Edmundas Kazimieras Zavadskas, Sachin Kumar Mangla and Jose Arturo Garza-Reyes

The critical success factors of using social media for supply chain social sustainability in the freight logistics industry pp. 1522-1539

Ifeyinwa Juliet Orji, Simonov Kusi-Sarpong and Himanshu Gupta

How will the diffusion of additive manufacturing impact the raw material supply chain process? pp. 1540-1554

Maximilian Kunovjanek and Gerald Reiner

A smart manufacturing adoption framework for SMEs pp. 1555-1573

Sameer Mittal, Muztoba Ahmad Khan, Jayant Kishor Purohit, Karan Menon, David Romero and Thorsten Wuest

A study on investments in the big data-driven supply chain, performance measures and organisational performance in Indian retail 4.0 context pp. 1574-1593

Shradha A. Gawankar, Angappa Gunasekaran and Sachin Kamble

Convolutional and generative adversarial neural networks in manufacturing pp. 1594-1604

Andrew Kusiak

Volume 58, issue 4, 2020

In search for classification and selection of spare parts suitable for additive manufacturing: a literature review pp. 970-996

Casper Selmer Frandsen, Martin Mathias Nielsen, Atanu Chaudhuri, Jayanth Jayaram and Kannan Govindan

Establishment of critical success factors for implementation of product lifecycle management systems pp. 997-1016

Shikha Singh, Subhas Chandra Misra and Felix T. S. Chan

Optimal strategies of improving energy efficiency for an energy-intensive manufacturer considering consumer environmental awareness pp. 1017-1033

Jianjun Ouyang and Jie Fu

Knowledge-driven digital twin manufacturing cell towards intelligent manufacturing pp. 1034-1051

Guanghui Zhou, Chao Zhang, Zhi Li, Kai Ding and Chuang Wang

Rolling horizon production scheduling of multi-model PCBs for several assembly lines pp. 1052-1073

Jani Koskinen, Csaba Raduly-Baka, Mika Johnsson and Olli S. Nevalainen

A framework for System Excellence assessment of production systems, based on lean thinking, business excellence, and factory physics pp. 1074-1091

Norman Roth, Jochen Deuse and Hubert Biedermann

Leasing or buying white goods: comparing manufacturer profitability versus cost to consumer pp. 1092-1106

Patricia van Loon, Charles Delagarde, Luk N. Van Wassenhove and Aleš Mihelič

The optimal sales format for green products considering downstream investment pp. 1107-1126

Jing Wang, Yingchen Yan, Huibin Du and Ruiqing Zhao

Real-time scheduling of semi-urgent patients under waiting time targets pp. 1127-1143

Jing Wen, Na Geng and Xiaolan Xie

Integrated production planning and quality control for linear production systems under uncertainties of cycle time and finished product quality pp. 1144-1160

Oussama Ben-Ammar, Belgacem Bettayeb and Alexandre Dolgui

Research on rush order insertion rescheduling problem under hybrid flow shop based on NSGA-III pp. 1161-1177

Xiaomei He, Shaohua Dong and Ning Zhao

Battle damage-oriented spare parts forecasting method based on wartime influencing factors analysis and ε-support vector regression pp. 1178-1198

Xiong Li, Xiaodong Zhao and Wei Pu

Q(λ) learning-based dynamic route guidance algorithm for overhead hoist transport systems in semiconductor fabs pp. 1199-1221

Illhoe Hwang and Young Jae Jang

A Lagrangian heuristic for minimising risk using multiple heterogeneous metrology tools pp. 1222-1238

Stéphane Dauzère-Pérès, Michael Hassoun and Alejandro Sendon

Replenishment policy for a purchase-to-order seller: a tradeoff between ordering cost and delay cost pp. 1239-1254

Guanqun Ni

Workers’ rest allowance and smoothing of the workload in assembly lines pp. 1255-1270

Serena Finco, Daria Battini, Xavier Delorme, Alessandro Persona and Fabio Sgarbossa

Value-based contract for smart operation and maintenance service based on equitable entropy pp. 1271-1284

Fang Huang, Juhong Chen, Linhui Sun, Yaqi Zhang and Shujun Yao

Volume 58, issue 3, 2020

Disassembly line design with multi-manned workstations: a novel heuristic optimisation approach pp. 649-670

Emre Cevikcan, Dicle Aslan and Fatma Betul Yeni

Formulations and solution algorithms for dynamic assembly routing problem pp. 671-688

H. Murat Afsar and Faicel Hnaien

Work-break scheduling with real-time fatigue effect and recovery pp. 689-702

Kai Li, Shuling Xu and Hong Fu

Ex post demand information sharing between differentiated suppliers and a common retailer pp. 703-728

Hui Lei, Jingru Wang, Lusheng Shao and Honglin Yang

Ageing workforce management in manufacturing systems: state of the art and future research agenda pp. 729-747

Martina Calzavara, Daria Battini, David Bogataj, Fabio Sgarbossa and Ilenia Zennaro

Research on optimal decision-making of cloud manufacturing service provider based on grey correlation analysis and TOPSIS pp. 748-757

Yanjuan Hu, Lizhe Wu, Chao Shi, Yilin Wang and Feifan Zhu

Real-time procurement policy with yield and price uncertainty pp. 758-782

Wenqiang Dai, Zhuolin Yang, Yi Feng and Meng Zheng

Risk management in the automotive supply chain: an exploratory study in Brazil pp. 783-799

Rosangela Maria Vanalle, W.C. Lucato, G.M.D. Ganga and A.G. Alves Filho

Parallel machine, capacitated lot-sizing and scheduling for the pipe-insulation industry pp. 800-817

Jésica de Armas and Manuel Laguna

State-space ARIMA for supply-chain forecasting pp. 818-827

Ivan Svetunkov and John E. Boylan

Smart production systems: automating decision-making in manufacturing environment pp. 828-845

Pooya Alavian, Yongsoon Eun, Semyon M. Meerkov and Liang Zhang

Multi-objective evolutionary simulated annealing optimisation for mixed-model multi-robotic disassembly line balancing with interval processing time pp. 846-862

Yilin Fang, Hao Ming, Miqing Li, Quan Liu and Duc Truong Pham

Batching and scheduling for a single-machine flexible machining cell with multi-fixturing pallets and controllable processing times pp. 863-877

Jeong-Hoon Shin, Jae-Min Yu, Hyoung-Ho Doh, Hyung-Won Kim and Dong-Ho Lee

A quasi-optimal inspection strategy for leased equipment pp. 878-892

Amel Ben Mabrouk, Anis Chelbi, Lazher Tlili and Mehdi Radhoui

Product platforms design, selection and customisation in high-variety manufacturing pp. 893-911

Francesco Gabriele Galizia, Hoda ElMaraghy, Marco Bortolini and Cristina Mora

The consignment stock of inventories under buyer's warehouse space limitation pp. 912-930

Stanisław Bylka

An improved design of exponentially weighted moving average scheme for monitoring attributes pp. 931-946

Salah Haridy, Mohammad Shamsuzzaman, Imad Alsyouf and Amitava Mukherjee

Big data in lean six sigma: a review and further research directions pp. 947-969

Shivam Gupta, Sachin Modgil and Angappa Gunasekaran

Volume 58, issue 2, 2020

The collaborative multi-level lot-sizing problem with cost synergies pp. 332-349

Margaretha Gansterer and Richard F. Hartl

The reduction of product and process complexity based on the quantification of product complexity costs pp. 350-366

Lars Hvam, Christian Lindschou Hansen, Cipriano Forza, Niels Henrik Mortensen and Anders Haug

A comparative analysis between different resource allocation and operating strategy implementation mechanisms using a system dynamics approach pp. 367-391

Xu Li and Xun Xu

Sustainable operations of industrial symbiosis: an enterprise input-output model integrated by agent-based simulation pp. 392-414

Devrim Murat Yazan and Luca Fraccascia

Empirical study to explore the impact of ergonomics on workforce scheduling pp. 415-433

Matteo M. Savino, Carlo Riccio and Marialuisa Menanno

Wafer delay analysis and control of dual-armed cluster tools with chamber cleaning operations pp. 434-447

Tae-Sun Yu and Tae-Eog Lee

Integration of supply chain management and quality management within a quality focused organizational framework pp. 448-466

Xianghui Peng, Victor Prybutok and Heng Xie

Scenario-based robust dominance criteria for multi-objective automated flexible transfer line balancing problem under uncertainty pp. 467-486

Cong He, Zailin Guan, Guangyan Xu, Lei Yue and Saif Ullah

A column generation-based approach for proportionate flexible two-stage no-wait job shop scheduling pp. 487-508

Zhi Pei, Xuefang Zhang, Li Zheng and Mingzhong Wan

Cooperative coevolution of expressions for (r,Q) inventory management policies using genetic programming pp. 509-525

Rui L. Lopes, Gonçalo Figueira, Pedro Amorim and Bernardo Almada-Lobo

A bi-objective multi-period facility location problem for household e-waste collection pp. 526-545

Jianmai Shi, Wenyi Chen, Zhongbao Zhou and Guoqing Zhang

Dynamic pricing in the presence of reference price effect and consumer strategic behaviour pp. 546-561

Kehong Chen, Yong Zha, Layth C. Alwan and Lu Zhang

Hybrid electric vehicle routing problem with mode selection pp. 562-576

Lu Zhen, Ziheng Xu, Chengle Ma and Liyang Xiao

Using structural equation modeling to analyze patient value, satisfaction, and loyalty: a case study of healthcare in China pp. 577-596

Rui Miao, Hui Zhang, Qi Wu, Jie Zhang and Zhibin Jiang

An imperialist competitive algorithm with memory for distributed unrelated parallel machines scheduling pp. 597-614

Deming Lei, Yue Yuan, Jingcao Cai and Danyu Bai

An iterative decomposition for asynchronous mixed-model assembly lines: combining balancing, sequencing, and buffer allocation pp. 615-630

Thiago Cantos Lopes, Celso Gustavo Stall Sikora, Adalberto Sato Michels and Leandro Magatão

Optimisation of the concurrent product and process configuration: an approach to reduce computation time with an experimental evaluation pp. 631-647

Paul Pitiot, Luis Garces Monge, Michel Aldanondo, Elise Vareilles and Paul Gaborit

Volume 58, issue 1, 2020

Zero defect manufacturing: state-of-the-art review, shortcomings and future directions in research pp. 1-17

Foivos Psarommatis, Gökan May, Paul-Arthur Dreyfus and Dimitris Kiritsis

Logistics 4.0: a systematic review towards a new logistics system pp. 18-43

Sven Winkelhaus and Eric H. Grosse

Managing climate change risks in global supply chains: a review and research agenda pp. 44-64

Abhijeet Ghadge, Hendrik Wurtmann and Stefan Seuring

Big data-driven supply chain performance measurement system: a review and framework for implementation pp. 65-86

Sachin S. Kamble and Angappa Gunasekaran

Bringing together Lean and simulation: a comprehensive review pp. 87-117

Ainhoa Goienetxea Uriarte, Amos H.C. Ng and Matías Urenda Moris

Game theory applications in production research in the sharing and circular economy era pp. 118-127

Tsan-Ming Choi, Ata Allah Taleizadeh and Xiaohang Yue

The production decisions and cap setting with wholesale price and revenue sharing contracts under cap-and-trade regulation pp. 128-147

Ting Ji, Xiaoping Xu, Xiaoming Yan and Yugang Yu

Product line design and quality differentiation for green and non-green products in a supply chain pp. 148-164

Bin Shen, Yifan Cao and Xiaoyan Xu

Green product design with competition and fairness concerns in the circular economy era pp. 165-179

Qingying Li, Xiaotong Guan, Tianqin Shi and Wen Jiao

Optimal trade-in and warranty period strategies for new and remanufactured products under carbon tax policy pp. 180-199

Kaiying Cao, Bing Xu and Jia Wang

The value of advance payment financing to carbon emission reduction and production in a supply chain with game theory analysis pp. 200-219

Juanjuan Qin, Yuqing Han, Guangming Wei and Liangjie Xia

A local seller's app channel strategy concerning delivery pp. 220-255

Zhiying Tao, Qinglong Gou and Juzhi Zhang

Game theoretic analysis for advertising models in dual-channel supply chains pp. 256-270

Ningning Wang, Ting Zhang, Xiaojun Fan and Xiaoxuan Zhu

Omnichannel retail operations with refurbished consumer returns pp. 271-290

Yi He, Qingyun Xu and Pengkun Wu

Dual sourcing under supply disruption with risk-averse suppliers in the sharing economy pp. 291-307

Varun Gupta and Dmitry Ivanov

Gray market's product quality in the circular economy era pp. 308-331

Qingning Cao and Jianqiang Zhang