International Journal of Production Research

1999 - 2025

Current editor(s): Professor A. Dolgui

From Taylor & Francis Journals
Bibliographic data for series maintained by Chris Longhurst ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 46, issue 20, 2008

Manufacturing strategy, the business environment, and operations performance in small low-tech firms pp. 5491-5513

Lawrence M. Corbett

A due-date based production control policy using WIP balance for implementation in semiconductor fabrications pp. 5515-5529

B. Lee, Y. H. Lee, T. Yang and J. Ignisio

Toward identifying the source of mean shifts in multivariate SPC: a neural network approach pp. 5531-5559

H. B. Hwarng

A CAPP framework with optimized process parameters for rotational components pp. 5561-5587

R. Siva Sankar, P. Asokan, G. Prabhaharan and A. V. Phani

Capacity and material requirement planning modelling by comparing deterministic and fuzzy models pp. 5589-5606

J. Mula, R. Poler and J. P. Garcia-Sabater

Intelligent layout planning for rapid prototyping pp. 5607-5631

A. S. Gogate and S. S. Pande

Relationship building, lean strategy and firm performance: an exploratory study in the automotive supplier industry pp. 5633-5649

Jayanth Jayaram, S. Vickery and C. Droge

Availability and throughput of unreliable, unbuffered production lines with non-homogeneous deterministic processing times pp. 5651-5677

K. Dhouib, A. Gharbi and S. Ayed

EWMA control charts for monitoring high-yield processes based on non-transformed observations pp. 5679-5699

Arthur B. Yeh, Richard N. Mcgrath, Mark A. Sembower and Qi Shen

Scheduling continuous aluminium casting lines pp. 5701-5718

Ekrem Duman, Mehmet Bayram Yildirim and Ali Fuat Alkaya

Ant colony optimization system for a multi-quantitative and qualitative objective job-shop parallel-machine-scheduling problem pp. 5719-5759

P.-T. Chang, K.-P. Lin, P.-F. Pai, C.-Z. Zhong, C.-H. Lin and L.-T. Hung

Evaluation of maintenance policies for equipment subject to quality shifts and failures pp. 5761-5779

S. Panagiotidou and G. Tagaras

Capacitated production planning with outsourcing in an OKP company pp. 5781-5795

X. Liu and Y. L. Tu

Accessibility analysis for automatic inspection in CMMs by using bounding volume hierarchies pp. 5797-5826

B. J. Alvarez, P. Fernandez, J. C. Rico, S. Mateos and C. M. Suarez

A heuristic procedure for the automobile assembly-line sequencing problem considering multiple product options pp. 5827-5847

F.-Y. Ding and J. He

Volume 45, issue 1, 2007

Manufacturing process changes: myopic and long-term planning pp. 1-27

J. Vits, L. Gelders and L. Pintelon

Applying case-based reasoning in assembly sequence planning pp. 29-47

Q. Su

Estimating process yield based on Spk for multiple samples pp. 49-64

W. L. Pearn and YA Ching Cheng

Development of a regression-based method with case-based tuning to solve the due date assignment problem pp. 65-82

D. Y. Sha, R. L. Storch and C.-H. Liu

Optimizing 3PL service delivery using a cost-to-serve and action research framework pp. 83-101

Anthony Ross, Vaidyanathan Jayaraman and Powell Robinson

Enriched multi-process modelling in support of the life cycle engineering of Business Processes pp. 103-141

K. A. Chatha, J. O. Ajaefobi and R. H. Weston

Timed event graph-based cyclic reconfigurable flow shop modelling and optimization pp. 143-156

S. C. Ren, D. Xu, F. Wang and M. Tan

Development of a highly efficient and resistant robust design pp. 157-167

Seong Beom Lee, Chanseok Park and Byung-Rae Cho

Socio-technical perspective on manufacturing system synergies pp. 169-205

A. Das and Jayanth Jayaram

An H∞ control method of the bullwhip effect for a class of supply chain system pp. 207-226

Xiao-Yuan Huang, Ni-Na Yan and Hai-Feng Guo

An integrated approach for process monitoring using wavelet analysis and competitive neural network pp. 227-244

Chih-Hsuan Wang, Way Kuo and Hairong Qi

Volume 38, issue 1, 2000

Dynamic scheduling of FMS using a real-time genetic algorithm pp. 1-20

Andrea Rossi and Gino Dini

Nexus method for stack analysis of geometric dimensioning and tolerancing (GDT) problems pp. 21-37

B. K. A. Ngoi, B.H. Lim and P.S. Ang

Structured adaptive supervisory control model and software development for a flexible manufacturing system pp. 39-49

Robin G. Qiu and Sanjay B. Joshi

Tactical models for hierarchical capacitated lot-sizing problems with setups and changeovers pp. 51-67

Aline Dumoulin and Carlo Vercellis

Adaptive direct slicing of the solid model for rapid prototyping pp. 69-83

Zhiwen Zhao and Luc Laperriere

Workshop scheduling using practical (inaccurate) data Part 3: A framework to integrate job releasing, routing and scheduling functions to create a robust predictive schedule pp. 85-99

R. Shafaei and P. Brunn

Optimal layout in low-level picker-to-part systems pp. 101-117

Franco Caron, Gino Marchet and Alessandro Perego

Prediction of die casting process parameters by using an artificial neural network model for zinc alloys pp. 119-139

Prasad K. D. V. Yarlagadda

The effect of push and pull lot splitting approaches on lot traceability and material handling costs in stochastic flow shop environments pp. 141-160

Hemant V. Kher, Manoj K. Malhotra and Daniel C. Steele

Machine learning based adaptive production control for a multi-cell flexible manufacturing system operating in a random environment pp. 161-185

Yohanan Arzi and Avi Herbon

Optimal design of the inspection buffer for an unreliable process pp. 187-205

Ilan Gilboa, Yale T. Herer, Haya Kaspi and Tzvi Raz

Efficient methods for scheduling make-to-order assemblies under resource, assembly area and part availability constraints pp. 207-228

R. Kolisch and K. Hess

New p-median approach to cell formation with alternative process plans pp. 229-240

Y. Won

Volume 37, issue 6, 1999

Obituary Emeritus Professor Roy Sury CEng PhD (1924-1999) Principal Editor of IJPR (1980-1998) pp. 1199-1200

The Editors

Optimal material release times in stochastic production environments pp. 1201-1216

C. N. Hasan and M. L. Spearman

Automatic visual inspection of surface mount solder joint defects pp. 1217-1242

O. Oyeleye

An options view of robot performance parameters in a dynamic environment pp. 1243-1257

M. J. Khouja

Automatic extraction of manufacturable features from CADD models using syntactic pattern recognition techniques pp. 1259-1281

B. S. Prabhu

Compliance based MIP model and heuristic for support layout optimization pp. 1283-1301

Q. A. Sayeed

Machine loading and part type selection in flexible manufacturing systems pp. 1303-1317

F. Guerrero, S. Lozano, Tamás Koltai and J. Larrañeta

Document viewpoint on one-of-a-kind delivery process pp. 1319-1336

A.-P. Hameri

Organizational factors and total quality management an empirical study pp. 1337-1352

I. Nelson Joseph

A closed-loop process analysis and control system for machining parts pp. 1353-1368

S. H. Cheraghi

Scheduling to minimize product design time using a genetic algorithm pp. 1369-1386

F. S. C. Lam

The construction of production performance prediction system for semiconductor manufacturing with artificial neural networks pp. 1387-1402

C.-L. Huang

An empirical examination of quality tool deployment patterns and their impact on performance pp. 1403-1426

R. Handfield, Jayanth Jayaram and S. Ghosh

Part dispatching and machine loading in flexible manufacturing systems using central queues pp. 1427-1435

J. N. D. Gupta

Book reviews pp. 1437-1438

The Editors

Volume 37, issue 4, 1999

ULINO: Optimally balancing U-shaped JIT assembly lines pp. 721-736

A. Scholl and R. Klein

Confirmation sample control charts pp. 737-748

S. H. Steiner

Development and validation of genetic algorithm-based facility layout a case study in the pharmaceutical industry pp. 749-768

S. Hamamoto, Y. Yih and G. Salvendy

A workload balancing model for determining set-up time and batch size reductions in GT flow line workcells pp. 769-791

R. R. Gung

On determination of sample size in form error evaluation using coordinate metrology pp. 793-804

V. N. Narayanan Namboothiri

Automatic PLC software generator with a natural interface pp. 805-819

O. Duran

Relating company performance to staff perceptions: The impact of concurrent engineering on time to market pp. 821-834

Vincent G. Duffy

An economic machining process model using fuzzy non-linear programming and neural network pp. 835-847

Y. H. Lee

The impact of new production technologies on the maintenance function: An empirical study pp. 849-869

Laura Swanson

Measuring the mix response flexibility of manufacturing systems pp. 871-880

N. Bateman

The effect of warehouse cross aisles on order picking efficiency pp. 881-897

T. S. Vaughan

Fuzzy outranking approach to prioritize design requirements in quality function deployment pp. 899-916

J. Wang

Optimal tool replacement and resetting strategies in automated manufacturing systems pp. 917-937

A. K. Sheikh

Manufacturing technology sourcing practices in the USA pp. 939-956

T. S. Baines

Book reviews pp. 957-960

The Editors