European Journal of Operational Research
1977 - 2025
Current editor(s): Roman Slowinski, Jesus Artalejo, Jean-Charles. Billaut, Robert Dyson and Lorenzo Peccati From Elsevier Bibliographic data for series maintained by Catherine Liu (). Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.
Volume 168, issue 3, 2006
- Balancing Assembly and Transfer Lines pp. 663-665

- Alexandre Dolgui
- State-of-the-art exact and heuristic solution procedures for simple assembly line balancing pp. 666-693

- Armin Scholl and Christian Becker
- A survey on problems and methods in generalized assembly line balancing pp. 694-715

- Christian Becker and Armin Scholl
- An linear programming based lower bound for the simple assembly line balancing problem pp. 716-731

- Marc Peeters and Zeger Degraeve
- A special case of transfer lines balancing by graph approach pp. 732-746

- Alexandre Dolgui, Nikolai Guschinsky and Genrikh Levin
- Cost-oriented assembly line balancing: Model formulations, solution difficulty, upper and lower bounds pp. 747-770

- Matthias Amen
- An optimal piecewise-linear program for the U-line balancing problem with stochastic task times pp. 771-782

- Timothy L. Urban and Wen-Chyuan Chiang
- Stability analysis of an optimal balance for an assembly line with fixed cycle time pp. 783-797

- Yuri N. Sotskov, Alexandre Dolgui and Marie-Claude Portmann
- A heuristic solution for fuzzy mixed-model line balancing problem pp. 798-810

- Nguyen Van Hop
- A genetic algorithm for robotic assembly line balancing pp. 811-825

- Gregory Levitin, Jacob Rubinovitz and Boris Shnits
- Balancing assembly lines with tabu search pp. 826-837

- Sophie D. Lapierre, Angel Ruiz and Patrick Soriano
- An endosymbiotic evolutionary algorithm for the integration of balancing and sequencing in mixed-model U-lines pp. 838-852

- Yeo Keun Kim, Jae Yun Kim and Yeongho Kim
- Dynamic task assignment for throughput maximization with worksharing pp. 853-869

- Ronald G. Askin and Jiaqiong Chen
- Bucket brigades on in-tree assembly networks pp. 870-879

- John J. Bartholdi , Donald D. Eisenstein and Yun Fong Lim
- Controlling mixed-model assembly lines in real-time by using distributed systems pp. 880-904

- Stefan Bock, Otto Rosenberg and Thomas van Brackel
- Sequencing and loading of products on a flowline pp. 905-921

- Subhash C. Sarin, Michael P. Greco and Ezey M. Dar-El
- Optimal allocation of work in assembly lines for lots with homogenous learning pp. 922-931

- Yuval Cohen, Gad Vitner and Subhash C. Sarin
- Generation of assembly graphs by systematic analysis of assembly structures pp. 932-951

- Alfred J.D. Lambert
- Three-dimensional packing of items with limited load bearing strength pp. 952-966

- E.E. Bischoff
- Cutting plane method for multiple objective stochastic integer linear programming pp. 967-984

- Moncef Abbas and Fatima Bellahcene
- Flexible flow shop scheduling with uniform parallel machines pp. 985-997

- George J. Kyparisis and Christos Koulamas
- A tandem clustering process for multimodal datasets pp. 998-1008

- Catherine Cho, Sooyoung Kim, Jaewook Lee and Dae-Won Lee
- Knowledge discovery using a neural network simultaneous optimization algorithm on a real world classification problem pp. 1009-1018

- Randall S. Sexton, Shannon McMurtrey and Dean Cleavenger
- Characterizing solutions of rough programming problems pp. 1019-1029

- Ebrahim A. Youness
- Branch-and-bound algorithms for solving hard instances of the one-machine sequencing problem pp. 1030-1039

- Yunpeng Pan and Leyuan Shi
Volume 168, issue 2, 2006
- Mathematical Finance and Risk Assessment pp. 279-280

- Tadashi Dohi, Shunji Osaki and Nikolaos Limnios
- Price limits and capital requirements of futures clearinghouses pp. 281-290

- Latha Shanker and Narayanaswamy Balakrishnan
- The comparative statics on asset prices based on bull and bear market measure pp. 291-300

- Masamitsu Ohnishi and Yusuke Osaki
- Monte Carlo analysis of convertible bonds with reset clauses pp. 301-310

- Toshikazu Kimura and Toshio Shinohara
- An impulse control of a geometric Brownian motion with quadratic costs pp. 311-321

- Masamitsu Ohnishi and Motoh Tsujimura
- Bounds for the price of a European-style Asian option in a binary tree model pp. 322-332

- Huguette Reynaerts, Michele Vanmaele, Jan Dhaene and Griselda Deelstra
- Some results on symmetric duality of multiobjective programmes with generalized (F,[rho]) invexity pp. 333-339

- D.B. Ojha and R.N. Mukherjee
- A linear programming framework for free disposal hull technologies and cost functions: Primal and dual models pp. 340-344

- Hervé Leleu
- Posynomial geometric programming with parametric uncertainty pp. 345-353

- Shiang-Tai Liu
- An evolutionary programming algorithm for continuous global optimization pp. 354-369

- Yao Wen Yang, Jian Feng Xu and Chee Kiong Soh
- Scheduling orders for multiple product types with due date related objectives pp. 370-389

- Joseph Y.-T. Leung, Haibing Li and Michael Pinedo
- Using tree search bounds to enhance a genetic algorithm approach to two rectangle packing problems pp. 390-402

- Kathryn A. Dowsland, Edward A. Herbert, Graham Kendall and Edmund Burke
- On solving multi-type railway line planning problems pp. 403-424

- Jan-Willem Goossens, Stan van Hoesel and Leo Kroon
- One-sided elasticities and technical efficiency in multi-output production: A theoretical framework pp. 425-449

- Petros Hadjicostas and Andreas C. Soteriou
- Allocative efficiency of technically inefficient production units pp. 450-462

- Peter Bogetoft, Rolf Fare and Borge Obel
- An inventory model for deteriorating items with stock-dependent consumption rate and shortages under inflation and time discounting pp. 463-474

- Kuo-Lung Hou
- The application of prediction capability and adaptive target control to the newspaper business pp. 475-491

- Michael Pearson
- Cost analysis on renewable full-service warranties for multi-component systems pp. 492-508

- Jun Bai and Hoang Pham
- Dynamic load balancing in parallel queueing systems: Stability and optimal control pp. 509-519

- Douglas G. Down and Mark E. Lewis
- Quantile and tolerance-interval estimation in simulation pp. 520-540

- E. Jack Chen and W. David Kelton
- A [delta]-shock maintenance model for a deteriorating system pp. 541-556

- Ya-yong Tang and Yeh Lam
- Rank from comparisons and from ratings in the analytic hierarchy/network processes pp. 557-570

- Thomas L. Saaty
- A rational approach to handling fuzzy perceptions in route choice pp. 571-583

- Turan Arslan and Jotin Khisty
- Nonessential objectives within network approaches for MCDM pp. 584-592

- Tomas Gal and Thomas Hanne
- Establish standards of standard costing with the application of convergent gray zone test pp. 593-611

- Tzy-yih Hsiao
- An efficient linear model and optimisation algorithm for multi-site combined heat and power production pp. 612-632

- Aiying Rong, Henri Hakonen and Risto Lahdelma
- Passenger grouping under constant threat probability in an airport security system pp. 633-644

- Suresh Babu, Rajan Batta and Li Lin
- The impact of energy function structure on solving generalized assignment problem using Hopfield neural network pp. 645-654

- M.A.S. Monfared and M. Etemadi
Volume 168, issue 1, 2006
- Single item lot sizing problems pp. 1-16

- Nadjib Brahimi, Stephane Dauzere-Peres, Najib M. Najid and Atle Nordli
- Integration of pricing and capacity allocation for perishable products pp. 17-34

- Youyi Feng and Baichun Xiao
- The relationship between organization strategy, total quality management (TQM), and organization performance--the mediating role of TQM pp. 35-50

- Daniel I. Prajogo and Amrik S. Sohal
- Retailer's optimal pricing and lot-sizing policies for deteriorating items with partial backlogging pp. 51-64

- Horng-Jinh Chang, Jinn-Tsair Teng, Liang-Yuh Ouyang and Chung-Yuan Dye
- Coordination of cooperative advertising in a two-level supply chain when manufacturer offers discount pp. 65-85

- Jinfeng Yue, Jill Austin, Min-Chiang Wang and Zhimin Huang
- Optimal preventive maintenance of a production system with an intermediate buffer pp. 86-99

- E.G. Kyriakidis and T.D. Dimitrakos
- A geometric process model for M/M/1 queueing system with a repairable service station pp. 100-121

- Yeh Lam, Yuan Lin Zhang and Qun Liu
- Joint statistical design of double sampling and s charts pp. 122-142

- David He and Arsen Grigoryan
- A flexible stochastic differential equation model in distributed development environment pp. 143-152

- Yoshinobu Tamura and Shigeru Yamada
- A two threshold vacation policy in multiserver queueing systems pp. 153-163

- Naishuo Tian and Zhe George Zhang
- Knowledge acquisition in incomplete information systems: A rough set approach pp. 164-180

- Yee Leung, Wei-Zhi Wu and Wen-Xiu Zhang
- Mathematical programming based heuristics for improving LP-generated classifiers for the multiclass supervised classification problem pp. 181-199

- Jan Adem and Willy Gochet
- Heuristics for selecting robust database structures with dynamic query patterns pp. 200-220

- Andrew N.K. Chen, Paulo B. Goes, Alok Gupta and James R. Marsden
- A game-theoretic formulation of joint implementation of environmental projects pp. 221-239

- Michele Breton, Georges Zaccour and Mehdi Zahaf
- How real option disinvestment flexibility augments project NPV pp. 240-252

- Aneel Keswani and Mark Shackleton
- Do bank mergers have hidden or foregone value? Realized and unrealized operating synergies in one bank merger pp. 253-268

- H. David Sherman and Timothy J. Rupert
| |