European Journal of Operational Research

1977 - 2026

Current editor(s): Roman Slowinski, Jesus Artalejo, Jean-Charles. Billaut, Robert Dyson and Lorenzo Peccati

From Elsevier
Bibliographic data for series maintained by Catherine Liu ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 69, issue 3, 1993

Editorial pp. 281-283

Nanua Singh

Design of cellular manufacturing systems: An invited review pp. 284-291

N. Singh

A work load-oriented heuristic methodology for manufacturing cell formation allowing reallocation of operations pp. 292-311

Sung-Lyong Kang and Urban Wemmerlov

Cell formation in PCB assembly based on production quantitative data pp. 312-329

Dino Luzzatto and Marco Perona

A mathematical model for cell formation considering investment and operational costs pp. 330-341

Gajendra K. Adil, Divakar Rajamani and Doug Strong

An improved neural network leader algorithm for part-machine grouping in group technology pp. 342-356

Shashidhar Kaparthi, Nallan C. Suresh and Robert P. Cerveny

A novel machine grouping and knowledge-based approach for cellular manufacturing pp. 357-372

Wing S. Chow and Ostap Hawaleshka

On cell size and machine requirements planning in group technology systems pp. 373-383

S. Sankaran and R. G. Kasilingam

Worst-case analysis of an algorithm for cellular manufacturing pp. 384-398

Shu Ming Ng

Optimization analysis of flexible cellular manufacturing: Route selection and determining the optimal production conditions for ordered products pp. 399-412

Sangjae Song and Junghee Choi

Setup time reduction and competitive advantage in a closed manufacturing cell pp. 413-423

Jiaqin Yang and Richard H. Deane

Manufacturing cell operating characteristics pp. 424-437

Li Lin and Francis Chiu

A comparison of scheduling philosophies for manufacturing cells pp. 438-449

Ronald G. Askin and Anand Iyer

A comparison of buffering strategies for the CMS routing/sequencing problem pp. 450-466

G. Don Taylor and Hamdy A. Taha

Two-machine group scheduling problem with blocking and anticipatory setups pp. 467-481

Rasaratnam Logendran and Chelliah Sriskandarajah

Dynamic sequencing of robot moves in a manufacturing cell pp. 482-497

Shu-Chu Liu and Li Lin

Cellular control of manufacturing systems pp. 498-509

F. Della Croce, G. Menga, R. Tadei, M. Cavalotto and L. Petri

Volume 69, issue 2, 1993

Optimal incentives and asymmetric distribution of information pp. 143-153

Thomas Hartmann-Wendels

On the (t, Sj) policy in an integrated production/inventory model with time-proportional demand pp. 154-165

Jae-Dong Hong, Tom M. Cavalier and Jack C. Hayya

Buffer levels and choice of material handling device in flexible manufacturing systems pp. 166-176

B. Mahadevan and T. T. Narendran

A duopoly model of pricing for inventory liquidation pp. 177-186

Sushil Bikhchandani and John W. Mamer

The job shop tardiness problem: A decomposition approach pp. 187-199

N. Raman and F. Brian Talbot

Preference simulation and preference programming: robustness issues in priority derivation pp. 200-209

Ami Arbel and Luis G. Vargas

A multicriteria evaluation of methods for obtaining weights from ratio-scale matrices pp. 210-220

B. Golany and M. Kress

The long-term elasticity of the milk supply with respect to the milk price in the Netherlands in the period 1969-1984 pp. 221-237

J. H. J. Roemen

Simulated annealing for the QAP -- Optimal tradeoff between simulation time and solution quality pp. 238-243

Per S. Laursen

A knapsack program generator of fractal curves with random stopping rule pp. 244-249

A. Bellacicco and L. Miccoli

Approximate techniques for general closed queueing networks with subnetworks having population constraints pp. 250-264

Bruno Baynat and Yves Dallery

Mean-variance criteria in an undiscounted Markov decision process pp. 265-276

Kun-Jen Chung

Volume 69, issue 1, 1993

Integrating production and quality control policies: A survey pp. 1-13

S. K. Goyal, A. Gunasekaran, T. Martikainen and P. Yli-Olli

The growth of exhaustion pp. 14-25

Kenyon B. De Greene

Energy use in Greek manufacturing, 1970-1989 pp. 26-37

G. Cosmetatos, J. Leon, A. Skaleou and G. Skourtias

A generalized model for determining optimal number of minimal repairs before replacement pp. 38-49

Shey-Huei Sheu

An optimal operation policy for real-time n-server stand-by systems involving preventive maintenance pp. 50-54

Joseph Kreimer and Abraham Mehrez

Multivalued continuum systems pp. 55-64

J. Montero, J. Tejada and J. Yanez

Heuristic testing procedures for general coherent systems pp. 65-74

Yuping Qiu and Louis Anthony Cox

A note on optimal replacement policy under general repair pp. 75-82

Viliam Makis and Andrew K. S. Jardine

Training neural networks with the GRG2 nonlinear optimizer pp. 83-91

Ming S. Hung and James W. Denton

Timetable construction with Markovian neural network pp. 92-96

Matevz Kovacic

An algorithm for the ranking of shortest paths pp. 97-106

JoseAugusto Azevedo, Maria Emilia O. Santos Costa, Joaquim Joao E. R. Silvestre Madeira and Ernesto Q. Vieira Martins

Small and large TSP: Two polynomially solvable cases of the traveling salesman problem pp. 107-120

Rene van Dal, Jack A. A. van der Veen and Gerard Sierksma

A cutting-plane approach to the edge-weighted maximal clique problem pp. 121-130

G. Dijkhuizen and Ulrich Faigle

Generating the best K sequences in relocation problems pp. 131-137

Bertrand Miao-Tsong Lin and Shian-Shyong Tseng

OR Software pp. 138-139

Herve Thiriez

Volume 68, issue 3, 1993

Forecasting with scenarios pp. 291-303

Derek W. Bunn and Ahti A. Salo

Stock index futures arbitrage in Finland: Theory and evidence in a new market pp. 304-317

Vesa Puttonen

On the individual and incremental information content of accrual earnings, cash flows and cash dividends in the Finnish stock market pp. 318-333

Teppo Martikainen, Timo Rothovius and Paavo Yli-Olli

Cost analysis in the time domain pp. 334-343

Jeffrey D. Camm, Thomas R. Gulledge and Norman Womer

An interactive procedure for multiple objective integer linear programming problems pp. 344-351

Jasmina N. Karaivanova, Subhash C. Narula and Vassil Vassilev

A restricted class of multiobjective linear fractional programming problems pp. 352-355

D. Dutta, J. R. Rao and R. N. Tiwari

Approximating the noninferior set in multiobjective linear programming problems pp. 356-373

Rajendra S. Solanki, Perry A. Appino and Jared L. Cohon

Use of reference points for MOLP problems analysis pp. 374-378

Boyan Metev and Irena Yordanova

Duality theory for infinite-dimensional multiobjective linear programming pp. 379-388

Alejandro Balbas and Antonio Heras

Some experiments with simulated annealing techniques for packing problems pp. 389-399

Kathryn A. Dowsland

An algorithm for the 2D guillotine cutting stock problem pp. 400-412

Bruce MacLeod, Robert Moll, Mahesh Girkar and Nassim Hanifi

An exact search for the solution of the surrogate dual of the 0-1 bidimensional knapsack problem pp. 413-421

Arnaud Freville and Gerard Plateau

A variation of the assignment problem pp. 422-426

S. Geetha and K. P. K. Nair

On geometric programming problems having negative degrees of difficulty pp. 427-430

Dennis L. Bricker, Jae Chul Choi and Jayant Rajgopal

Volume 68, issue 2, 1993

Chaos in nonlinear dynamical systems exemplified by an R & D model pp. 145-159

Gustav Feichtinger and Michael Kopel

An integrated multiobjective planning model: A case study of the Zambian copper mining industry pp. 160-172

Ike C. Ehie and Colin O. Benjamin

A multiobjective approach to vendor selection pp. 173-184

Charles A. Weber and John R. Current

Optimal scheduling of purchasing orders for large projects pp. 185-195

Boaz Ronen and Dan Trietsch

Application of the scenario aggregation approach to a two-stage, stochastic, common component, inventory problem with a budget constraint pp. 196-211

Henrik Jonsson, Kurt Jörnsten and Edward A. Silver

Due date assignment procedures with dynamically updated coefficients for multi-level assembly job shops pp. 212-227

Nabil R. Adam, J. Will M. Bertrand, Diane C. Morehead and Julius Surkis

The analysis of an unreliable two-machine production line with random processing times pp. 228-235

Yushin Hong and Deokhyun Seong

Inspection interval for maximum future reliability using the delay time model pp. 236-250

P. Cerone

Sequencing of inspection operations subject to errors pp. 251-264

Tzvi Raz and Dennis Bricker

Algorithms for computerized inspection of rectangular and square shapes pp. 265-277

Jose A. Ventura and Zung-An Dung

Expert systems applications development research in business: A selected bibliography (1975-1989) pp. 278-290

Sean Eom, Sang M. Lee and Ahmed Ayaz

Volume 68, issue 1, 1993

Developments in implementable retailing research pp. 1-8

Alan Mercer

A methodology for competitiveness analysis and strategy formulation in glass industry pp. 9-22

Muhittin Oral

Performance characteristics of stochastic integrated production-distribution systems pp. 23-48

David F. Pyke and Morris A. Cohen

Models for evaluating the performance of serial and assembly MRP systems pp. 49-68

A. G. Lagodimos

The throughput rate of multistation unreliable production lines pp. 69-89

C. Heavey, H. T. Papadopoulos and J. Browne

Stochastic analysis of a dependent parallel system pp. 90-104

M. Pijnenburg, N. Ravichandran and G. Regterschot

Composing batches with yield uncertainty pp. 105-119

Christopher S. Tang

Optimal ordering policies with two suppliers when lead times and demands are all stochastic pp. 120-133

Hon-Shiang Lau and Long-Geng Zhao

Efficient post-optimization analysis procedure for the dynamic lot-sizing problem pp. 134-138

Moustapha Diaby

A conditional effect of autocorrelated demand on safety stock determination pp. 139-142

Howard Marmorstein and Walter Zinn

OR software pp. 143-144

Herve Thiriez