European Journal of Operational Research
1977 - 2025
Current editor(s): Roman Slowinski, Jesus Artalejo, Jean-Charles. Billaut, Robert Dyson and Lorenzo Peccati From Elsevier Bibliographic data for series maintained by Catherine Liu (). Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.
Volume 69, issue 3, 1993
- Editorial pp. 281-283

- Nanua Singh
- Design of cellular manufacturing systems: An invited review pp. 284-291

- N. Singh
- A work load-oriented heuristic methodology for manufacturing cell formation allowing reallocation of operations pp. 292-311

- Sung-Lyong Kang and Urban Wemmerlov
- Cell formation in PCB assembly based on production quantitative data pp. 312-329

- Dino Luzzatto and Marco Perona
- A mathematical model for cell formation considering investment and operational costs pp. 330-341

- Gajendra K. Adil, Divakar Rajamani and Doug Strong
- An improved neural network leader algorithm for part-machine grouping in group technology pp. 342-356

- Shashidhar Kaparthi, Nallan C. Suresh and Robert P. Cerveny
- A novel machine grouping and knowledge-based approach for cellular manufacturing pp. 357-372

- Wing S. Chow and Ostap Hawaleshka
- On cell size and machine requirements planning in group technology systems pp. 373-383

- S. Sankaran and R. G. Kasilingam
- Worst-case analysis of an algorithm for cellular manufacturing pp. 384-398

- Shu Ming Ng
- Optimization analysis of flexible cellular manufacturing: Route selection and determining the optimal production conditions for ordered products pp. 399-412

- Sangjae Song and Junghee Choi
- Setup time reduction and competitive advantage in a closed manufacturing cell pp. 413-423

- Jiaqin Yang and Richard H. Deane
- Manufacturing cell operating characteristics pp. 424-437

- Li Lin and Francis Chiu
- A comparison of scheduling philosophies for manufacturing cells pp. 438-449

- Ronald G. Askin and Anand Iyer
- A comparison of buffering strategies for the CMS routing/sequencing problem pp. 450-466

- G. Don Taylor and Hamdy A. Taha
- Two-machine group scheduling problem with blocking and anticipatory setups pp. 467-481

- Rasaratnam Logendran and Chelliah Sriskandarajah
- Dynamic sequencing of robot moves in a manufacturing cell pp. 482-497

- Shu-Chu Liu and Li Lin
- Cellular control of manufacturing systems pp. 498-509

- F. Della Croce, G. Menga, R. Tadei, M. Cavalotto and L. Petri
Volume 69, issue 2, 1993
- Optimal incentives and asymmetric distribution of information pp. 143-153

- Thomas Hartmann-Wendels
- On the (t, Sj) policy in an integrated production/inventory model with time-proportional demand pp. 154-165

- Jae-Dong Hong, Tom M. Cavalier and Jack C. Hayya
- Buffer levels and choice of material handling device in flexible manufacturing systems pp. 166-176

- B. Mahadevan and T. T. Narendran
- A duopoly model of pricing for inventory liquidation pp. 177-186

- Sushil Bikhchandani and John W. Mamer
- The job shop tardiness problem: A decomposition approach pp. 187-199

- N. Raman and F. Brian Talbot
- Preference simulation and preference programming: robustness issues in priority derivation pp. 200-209

- Ami Arbel and Luis G. Vargas
- A multicriteria evaluation of methods for obtaining weights from ratio-scale matrices pp. 210-220

- B. Golany and M. Kress
- The long-term elasticity of the milk supply with respect to the milk price in the Netherlands in the period 1969-1984 pp. 221-237

- J. H. J. Roemen
- Simulated annealing for the QAP -- Optimal tradeoff between simulation time and solution quality pp. 238-243

- Per S. Laursen
- A knapsack program generator of fractal curves with random stopping rule pp. 244-249

- A. Bellacicco and L. Miccoli
- Approximate techniques for general closed queueing networks with subnetworks having population constraints pp. 250-264

- Bruno Baynat and Yves Dallery
- Mean-variance criteria in an undiscounted Markov decision process pp. 265-276

- Kun-Jen Chung
Volume 69, issue 1, 1993
- Integrating production and quality control policies: A survey pp. 1-13

- S. K. Goyal, A. Gunasekaran, T. Martikainen and P. Yli-Olli
- The growth of exhaustion pp. 14-25

- Kenyon B. De Greene
- Energy use in Greek manufacturing, 1970-1989 pp. 26-37

- G. Cosmetatos, J. Leon, A. Skaleou and G. Skourtias
- A generalized model for determining optimal number of minimal repairs before replacement pp. 38-49

- Shey-Huei Sheu
- An optimal operation policy for real-time n-server stand-by systems involving preventive maintenance pp. 50-54

- Joseph Kreimer and Abraham Mehrez
- Multivalued continuum systems pp. 55-64

- J. Montero, J. Tejada and J. Yanez
- Heuristic testing procedures for general coherent systems pp. 65-74

- Yuping Qiu and Louis Anthony Cox
- A note on optimal replacement policy under general repair pp. 75-82

- Viliam Makis and Andrew K. S. Jardine
- Training neural networks with the GRG2 nonlinear optimizer pp. 83-91

- Ming S. Hung and James W. Denton
- Timetable construction with Markovian neural network pp. 92-96

- Matevz Kovacic
- An algorithm for the ranking of shortest paths pp. 97-106

- JoseAugusto Azevedo, Maria Emilia O. Santos Costa, Joaquim Joao E. R. Silvestre Madeira and Ernesto Q. Vieira Martins
- Small and large TSP: Two polynomially solvable cases of the traveling salesman problem pp. 107-120

- Rene van Dal, Jack A. A. van der Veen and Gerard Sierksma
- A cutting-plane approach to the edge-weighted maximal clique problem pp. 121-130

- G. Dijkhuizen and Ulrich Faigle
- Generating the best K sequences in relocation problems pp. 131-137

- Bertrand Miao-Tsong Lin and Shian-Shyong Tseng
- OR Software pp. 138-139

- Herve Thiriez
Volume 68, issue 3, 1993
- Forecasting with scenarios pp. 291-303

- Derek W. Bunn and Ahti A. Salo
- Stock index futures arbitrage in Finland: Theory and evidence in a new market pp. 304-317

- Vesa Puttonen
- On the individual and incremental information content of accrual earnings, cash flows and cash dividends in the Finnish stock market pp. 318-333

- Teppo Martikainen, Timo Rothovius and Paavo Yli-Olli
- Cost analysis in the time domain pp. 334-343

- Jeffrey D. Camm, Thomas R. Gulledge and Norman Womer
- An interactive procedure for multiple objective integer linear programming problems pp. 344-351

- Jasmina N. Karaivanova, Subhash C. Narula and Vassil Vassilev
- A restricted class of multiobjective linear fractional programming problems pp. 352-355

- D. Dutta, J. R. Rao and R. N. Tiwari
- Approximating the noninferior set in multiobjective linear programming problems pp. 356-373

- Rajendra S. Solanki, Perry A. Appino and Jared L. Cohon
- Use of reference points for MOLP problems analysis pp. 374-378

- Boyan Metev and Irena Yordanova
- Duality theory for infinite-dimensional multiobjective linear programming pp. 379-388

- Alejandro Balbas and Antonio Heras
- Some experiments with simulated annealing techniques for packing problems pp. 389-399

- Kathryn A. Dowsland
- An algorithm for the 2D guillotine cutting stock problem pp. 400-412

- Bruce MacLeod, Robert Moll, Mahesh Girkar and Nassim Hanifi
- An exact search for the solution of the surrogate dual of the 0-1 bidimensional knapsack problem pp. 413-421

- Arnaud Freville and Gerard Plateau
- A variation of the assignment problem pp. 422-426

- S. Geetha and K. P. K. Nair
- On geometric programming problems having negative degrees of difficulty pp. 427-430

- Dennis L. Bricker, Jae Chul Choi and Jayant Rajgopal
Volume 68, issue 2, 1993
- Chaos in nonlinear dynamical systems exemplified by an R & D model pp. 145-159

- Gustav Feichtinger and Michael Kopel
- An integrated multiobjective planning model: A case study of the Zambian copper mining industry pp. 160-172

- Ike C. Ehie and Colin O. Benjamin
- A multiobjective approach to vendor selection pp. 173-184

- Charles A. Weber and John R. Current
- Optimal scheduling of purchasing orders for large projects pp. 185-195

- Boaz Ronen and Dan Trietsch
- Application of the scenario aggregation approach to a two-stage, stochastic, common component, inventory problem with a budget constraint pp. 196-211

- Henrik Jonsson, Kurt Jörnsten and Edward A. Silver
- Due date assignment procedures with dynamically updated coefficients for multi-level assembly job shops pp. 212-227

- Nabil R. Adam, J. Will M. Bertrand, Diane C. Morehead and Julius Surkis
- The analysis of an unreliable two-machine production line with random processing times pp. 228-235

- Yushin Hong and Deokhyun Seong
- Inspection interval for maximum future reliability using the delay time model pp. 236-250

- P. Cerone
- Sequencing of inspection operations subject to errors pp. 251-264

- Tzvi Raz and Dennis Bricker
- Algorithms for computerized inspection of rectangular and square shapes pp. 265-277

- Jose A. Ventura and Zung-An Dung
- Expert systems applications development research in business: A selected bibliography (1975-1989) pp. 278-290

- Sean Eom, Sang M. Lee and Ahmed Ayaz
Volume 68, issue 1, 1993
- Developments in implementable retailing research pp. 1-8

- Alan Mercer
- A methodology for competitiveness analysis and strategy formulation in glass industry pp. 9-22

- Muhittin Oral
- Performance characteristics of stochastic integrated production-distribution systems pp. 23-48

- David F. Pyke and Morris A. Cohen
- Models for evaluating the performance of serial and assembly MRP systems pp. 49-68

- A. G. Lagodimos
- The throughput rate of multistation unreliable production lines pp. 69-89

- C. Heavey, H. T. Papadopoulos and J. Browne
- Stochastic analysis of a dependent parallel system pp. 90-104

- M. Pijnenburg, N. Ravichandran and G. Regterschot
- Composing batches with yield uncertainty pp. 105-119

- Christopher S. Tang
- Optimal ordering policies with two suppliers when lead times and demands are all stochastic pp. 120-133

- Hon-Shiang Lau and Long-Geng Zhao
- Efficient post-optimization analysis procedure for the dynamic lot-sizing problem pp. 134-138

- Moustapha Diaby
- A conditional effect of autocorrelated demand on safety stock determination pp. 139-142

- Howard Marmorstein and Walter Zinn
- OR software pp. 143-144

- Herve Thiriez
| |