|
|
Energy
1976 - 2025
Current editor(s): Henrik Lund and Mark J. Kaiser From Elsevier Bibliographic data for series maintained by Catherine Liu (). Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.
Volume 169, issue C, 2019
- Effects of tube shapes on the performance of recuperative and regenerative heat exchangers pp. 1-17

- Ngoctan Tran and Chi-Chuan Wang
- Relative combustion efficiency of composite fuels based on of wood processing and oil production wastes pp. 18-28

- K. Yu Vershinina, N.E. Shlegel and P.A. Strizhak
- A new model to evaluate solar spectrum impacts on the short circuit current of solar photovoltaic modules pp. 29-37

- Jinqing Peng, Lin Lu and Meng Wang
- Smart distribution system management considering electrical and thermal demand response of energy hubs pp. 38-49

- Vahid Davatgaran, Mohsen Saniei and Seyed Saeidollah Mortazavi
- Gas and electricity supply implications of decarbonising heat sector in GB pp. 50-60

- Meysam Qadrdan, Reza Fazeli, Nick Jenkins, Goran Strbac and Robert Sansom
- Evaluation of an optimal integrated design multi-fuel multi-product electrical power plant by energy and exergy analyses pp. 61-78

- Mehdi Mehrpooya, Mohammad Mehdi Moftakhari Sharifzadeh and Seyed Ali Mousavi
- Performance of buoyant shell horizontal axis wind turbine under fluctuating yaw angles pp. 79-91

- Arslan Saleem and Man-Hoe Kim
- Optimal battery technology selection and incentive-based demand response program utilization for reliability improvement of an insular microgrid pp. 92-104

- Tohid Khalili, Amirreza Jafari, Mehdi Abapour and Behnam Mohammadi-Ivatloo
- CFD simulation and optimization of industrial boiler pp. 105-114

- Souhir Echi, Abdallah Bouabidi, Zied Driss and Mohamed Salah Abid
- The impact of policy on residential energy consumption pp. 115-129

- Erdal Aydin and Dirk Brounen
- Modeling of downdraft gasification process: Part I - Studies on shrinkage effect on tabular, cylindrical and spherical geometries pp. 130-141

- Ashish Chaurasia
- A 3D-CFD study of a γ-type Stirling engine pp. 142-159

- Lukasz Kuban, Jakub Stempka and Artur Tyliszczak
- Crude oil price prediction model with long short term memory deep learning based on prior knowledge data transfer pp. 160-171

- Zhongpei Cen and Jun Wang
- Experimental investigation on effects of thermal resistances on a photovoltaic-thermoelectric system integrated with phase change materials pp. 172-185

- Ershuai Yin, Qiang Li, Dianhong Li and Yimin Xuan
- Modelling the return and volatility spillovers of crude oil and food prices in Nigeria pp. 186-205

- Ismail Fasanya and Seun Akinbowale
- Solar energy storing rock-bed to heat an agricultural greenhouse pp. 206-212

- L. Gourdo, H. Fatnassi, R. Tiskatine, A. Wifaya, H. Demrati, A. Aharoune and L. Bouirden
- Impact of geometric, operational, and model uncertainties on the non-ideal flow through a supersonic ORC turbine cascade pp. 213-227

- Nassim Razaaly, Giacomo Persico and Pietro Marco Congedo
- All UK electricity supplied by wind and photovoltaics – The 30–30 rule pp. 228-237

- Aikaterini Fragaki, Tom Markvart and Georgios Laskos
- Advanced exergy-based methods used to understand and improve energy-conversion systems pp. 238-246

- Tatiana Morosuk and George Tsatsaronis
- Exergy-based analysis combined with LCA for waste heat recovery in coal-fired CHP plants pp. 247-262

- Qi Zhang, Jintong Gao, Yujie Wang, Lin Wang, Zaihai Yu and Dayong Song
- Performance analysis of a PV/Diesel hybrid system for a remote area in Bangladesh: Effects of dispatch strategies, batteries, and generator selection pp. 263-276

- Barun K. Das and Forhad Zaman
- Bridging the gap using energy services: Demonstrating a novel framework for soft linking top-down and bottom-up models pp. 277-293

- Kristoffer S. Andersen, Lars B. Termansen, Maurizio Gargiulo and Brian P. Ó Gallachóirc
- High power density energy harvester with non-uniform cantilever structure due to high average strain distribution pp. 294-304

- Yili Hu, Zhiran Yi, Xiaoxue Dong, Fangxiao Mou, Yingwei Tian, Qinghai Yang, Bin Yang and Jingquan Liu
- Comparative evaluation of performance of high and low ash coal fuelled chemical looping combustion integrated combined cycle power generating systems pp. 305-318

- Navneet Mishra, Barnali Bhui and Prabu Vairakannu
- Multi-objective optimization of district heating and cooling systems for a one-year time horizon pp. 319-328

- Hrvoje Dorotić, Tomislav Pukšec and Neven Duić
- Oxygen transport capacity and kinetic study of ilmenite ores for methane chemical-looping combustion pp. 329-337

- Nima Khakpoor, Ehsan Mostafavi, Nader Mahinpey and Hector De la Hoz Siegler
- Three-dimensional study of stack on the performance of the proton exchange membrane fuel cell pp. 338-343

- B.H. Lim, E.H. Majlan, W.R.W. Daud, M.I. Rosli and T. Husaini
- Study of bio-oil properties and ageing through fractionation and ternary mixtures with the heavy fraction as the main component pp. 344-355

- Luiz Augusto Badan Ribeiro, Robson Cristiano Martins, Juan Miguel Mesa-Pérez and Waldir Antonio Bizzo
- Capturing energy from ultra-low frequency vibrations and human motion through a monostable electromagnetic energy harvester pp. 356-368

- Kangqi Fan, Meiling Cai, Haiyan Liu and Yiwei Zhang
- Enhanced prioritisation of prospective scenarios for power generation in Spain: How and which one? pp. 369-379

- Mario Martín-Gamboa, Diego Iribarren, Diego García-Gusano and Javier Dufour
- Energy demand and greenhouse gas emissions analysis in Colombia: A LEAP model application pp. 380-397

- J.A. Nieves, A.J. Aristizábal, I. Dyner, O. Báez and D.H. Ospina
- Ameliorated grey wolf optimization for economic load dispatch problem pp. 398-419

- Diljinder Singh and J.S. Dhillon
- Economic feasibility of combined cooling, heating, and power (CCHP) systems considering electricity standby tariffs pp. 420-432

- Hyeunguk Ahn, James D. Freihaut and Donghyun Rim
- Computationally efficient model for energy demand prediction of electric city bus in varying operating conditions pp. 433-443

- Jari Vepsäläinen, Kevin Otto, Antti Lajunen and Kari Tammi
- Aerodynamic shape optimization of a single turbine stage based on parameterized Free-Form Deformation with mapping design parameters pp. 444-455

- Lei Li, Jiangkun Jiao, Shouyi Sun, Zhenan Zhao and Jialei Kang
- The impact of wind generation on wholesale electricity market prices in the midcontinent independent system operator energy market: An empirical investigation pp. 456-466

- Dov Quint and Steve Dahlke
- Natural gas consumption and economic growth: Evidence from selected natural gas vehicle markets in Europe pp. 467-477

- Gideon Fadiran, Adebisi T. Adebusuyi and David Fadiran
- Experimental and numerical performance analyses of Dish-Stirling cavity receivers: Radiative property study and design pp. 478-488

- Jorge Garrido, Lukas Aichmayer, Abdallah Abou-Taouk and Björn Laumert
- Automobile components: Lithium and cobalt. Evidence of persistence pp. 489-495

- Manuel Monge and Luis Gil-Alana
- Detailed study, multi-objective optimization, and design of an AC-DC smart microgrid with hybrid renewable energy resources pp. 496-507

- Mohammad Ghiasi
- Fuel consumption model optimization based on transient correction pp. 508-514

- Hao Guang and Hui Jin
- A stochastic optimisation model for biomass outsourcing in the cement manufacturing industry with production planning constraints pp. 515-526

- Dedi Abriyantoro, Jingxin Dong, Christian Hicks and Surya P. Singh
- Improved combustion air preheating design using multiple heat sources incorporating bypass flue in large-scale coal-fired power unit pp. 527-541

- Heng Chen, Yunyun Wu, Zhen Qi, Qiao Chen, Gang Xu, Yongping Yang and Wenyi Liu
- Heat transfer investigation of supercritical R134a for trans-critical organic Rankine cycle system pp. 542-557

- Dabiao Wang, Ran Tian, Yue Zhang, LanLan Li, Yuezheng Ma, Lin Shi and Hui Li
- Experimental study the effects of various compression ratios and spark timing on performance and emission of a lean-burn heavy-duty spark ignition engine fueled with methane gas and hydrogen blends pp. 558-571

- Xiongbo Duan, Yangyang Li, Jingping Liu, Genmiao Guo, Jianqin Fu, Quanchang Zhang, Shiheng Zhang and Weiqiang Liu
- Effect of hydrogen peroxide additive on the combustion and emission characteristics of an n-butanol homogeneous charge compression ignition engine pp. 572-579

- Ao Zhou, Chunhua Zhang, Yangyang Li, Songfeng Li and Peng Yin
- Novel 3D hierarchical bifunctional NiTiO3 nanoflower for superior visible light photoreduction performance of CO2 to CH4 and high lithium storage performance pp. 580-586

- Yanan Wang, Xuanyu Chen, Qiuyang Wang, Yiqing Zeng, Kai Liao, Shule Zhang and Qin Zhong
- Assessing the effectiveness of a high-temperature-programmed experimental system for simulating the spontaneous combustion properties of bituminous coal through thermokinetic analysis of four oxidation stages pp. 587-596

- Jingyu Zhao, Jun Deng, Tao Wang, Jiajia Song, Yanni Zhang, Chi-Min Shu and Qiang Zeng
- High efficiency solar chemical-looping methane reforming with ceria in a fixed-bed reactor pp. 597-612

- Jesse R. Fosheim, Brandon J. Hathaway and Jane H. Davidson
- Potential, optimization and sensitivity analysis of photovoltaic-diesel-battery hybrid energy system for rural electrification in Algeria pp. 613-624

- F. Fodhil, A. Hamidat and O. Nadjemi
- Modeling the performance of the indirect dry cooling system in a thermal power generating unit under variable ambient conditions pp. 625-636

- Tao Wu, Zhihua Ge, Lijun Yang and Xiaoze Du
- How do fossil energy prices affect the stock prices of new energy companies? Evidence from Divisia energy price index in China's market pp. 637-645

- Chuanwang Sun, Dan Ding, Xingming Fang, Huiming Zhang and Jianglong Li
- A Layered Uncertainties Scenario Synthesizing (LUSS) model applied to evaluate multiple potential long-run outcomes for Iran's natural gas exports pp. 646-659

- Reza Hafezi, AmirNaser Akhavan, Saeed Pakseresht and David A. Wood
- Study on the general system integration optimization method of the solar aided coal-fired power generation system pp. 660-673

- Jianxing Wang, Liqiang Duan, Yongping Yang, Zhiping Yang and Laishun Yang
- An electricity consumption model for synthesizing scalable electricity load curves pp. 674-683

- Yunyou Huang, Jianfeng Zhan, Chunjie Luo, Lei Wang, Nana Wang, Daoyi Zheng, Fanda Fan and Rui Ren
- Thermodynamic evaluation of a waste gas-fired steam power plant in an iron and steel facility using enhanced exergy analysis pp. 684-695

- Kadir Yılmaz, Muhammet Kayfeci and Ali Keçebaş
- Multi-objective design optimization of a solar based system for electricity, cooling, and hydrogen production pp. 696-709

- Amirmohammad Behzadi, Ali Habibollahzade, Pouria Ahmadi, Ehsan Gholamian and Ehsan Houshfar
- Improving the benefits of demand response participation in facilities with distributed energy resources pp. 710-718

- Carlos Roldán-Blay, Guillermo Escrivá-Escrivá and Carlos Roldán-Porta
- Performance enhancement of microwave assisted regeneration in a wall-flow diesel particulate filter based on field synergy theory pp. 719-729

- E Jiaqiang, Xiaohuan Zhao, Longfu Xie, Bin Zhang, Jingwei Chen, Qingsong Zuo, Dandan Han, Wenyu Hu and Zhiqing Zhang
- Experimental investigation of a prototype R-600 compressor for high temperature heat pump pp. 730-738

- Opeyemi Bamigbetan, Trygve Magne Eikevik, Petter Nekså, Michael Bantle and Christian Schlemminger
- Optimal gas treatment and coal blending for reduced emissions in power plants: A case study in Northwest Spain pp. 739-749

- Lidia S. Guerras and Mariano Martín
- Distributed energy system for sustainability transition: A comprehensive assessment under uncertainties based on interval multi-criteria decision making method by coupling interval DEMATEL and interval VIKOR pp. 750-761

- Zhenfeng Wang, Guangyin Xu, Heng Wang and Jingzheng Ren
- Will Trump's coal revival plan work? - Comparison of results based on the optimal combined forecasting technique and an extended IPAT forecasting technique pp. 762-775

- Qiang Wang, Shuyu Li and Rongrong Li
- Micro-tubular flame-assisted fuel cells running methane, propane and butane: On soot, efficiency and power density pp. 776-782

- Ryan J. Milcarek and Jeongmin Ahn
- Feasibility of offshore wind energy as an alternative source for the state of Kuwait pp. 783-796

- W.K. Al-Nassar, S. Neelamani, K.A. Al-Salem and H.A. Al-Dashti
- Autonomous connected electric vehicle (ACEV)-based car-sharing system modeling and optimal planning: A unified two-stage multi-objective optimization methodology pp. 797-818

- Hongzhi Miao, Hongfei Jia, Jiangchen Li and Tony Z. Qiu
- Enhancement of wave energy absorption efficiency via geometry and power take-off damping tuning pp. 819-832

- Siya Jin, Ron J. Patton and Bingyong Guo
- Estimating remaining driving range of battery electric vehicles based on real-world data: A case study of Beijing, China pp. 833-843

- Jun Bi, Yongxing Wang, Qiuyue Sai and Cong Ding
- GIS-Based Multi-Objective Particle Swarm Optimization of charging stations for electric vehicles pp. 844-853

- Yue Zhang, Qi Zhang, Arash Farnoosh, Siyuan Chen and Yan Li
- A GIS-based method to identify potential sites for pumped hydro energy storage - Case of Iran pp. 854-867

- Narges Ghorbani, Hamed Makian and Christian Breyer
- Overcharge investigation of large format lithium-ion pouch cells with Li(Ni0.6Co0.2Mn0.2)O2 cathode for electric vehicles: Thermal runaway features and safety management method pp. 868-880

- Xiaoqing Zhu, Zhenpo Wang, Yituo Wang, Hsin Wang, Cong Wang, Lei Tong and Mi Yi
- A compressed air energy storage system with variable pressure ratio and its operation control pp. 881-894

- Qing He, Guoqing Li, Chang Lu, Dongmei Du and Wenyi Liu
- The co-movement between oil and clean energy stocks: A wavelet-based analysis of horizon associations pp. 895-913

- Aktham Maghyereh, Basel Awartani and Hussein Abdoh
- Experimental investigation and assessment of direct ammonia fuel cells utilizing alkaline molten and solid electrolytes pp. 914-923

- O. Siddiqui and I. Dincer
- Searching for the ‘smart’ definition through its spatial approach pp. 924-936

- Sesil Koutra, Vincent Becue and Christos S. Ioakimidis
- Optimization of compound power split configurations in PHEV bus for fuel consumption and battery degradation decreasing pp. 937-957

- Feitie Zhang, Fuyuan Yang, Dianlun Xue and Yuanchun Cai
- Dynamic performance investigation for two types of ORC system driven by waste heat of automotive internal combustion engine pp. 958-971

- Shan Lin, Li Zhao, Shuai Deng, Jiaxin Ni, Ying Zhang and Minglu Ma
- High resolution spatio-temporal modelling of solar photovoltaic potential for tropical islands: Case of Mauritius pp. 972-987

- Jay Rovisham Singh Doorga, Soonil D.D.V. Rughooputh and Ravindra Boojhawon
- Combined heat and power control considering thermal inertia of district heating network for flexible electric power regulation pp. 988-999

- Wei Wang, Sitong Jing, Yang Sun, Jizhen Liu, Yuguang Niu, Deliang Zeng and Can Cui
- Emission reduction through highly oxygenated viscous biofuels: Use of glycerol in a micro gas turbine pp. 1000-1011

- T. Seljak and T. Katrašnik
- Evaluation on a combined model for low-rank coal pyrolysis pp. 1012-1021

- Lan Yi, Jie Feng and Wen-Ying Li
- Assessment of damping coefficients of power take-off systems of wave energy converters: A hybrid approach pp. 1022-1038

- Claudio A. Rodríguez, Paulo Rosa-Santos and Francisco Taveira-Pinto
- Acceleration curve optimization for electric vehicle based on energy consumption and battery life pp. 1039-1053

- Lifu Li and Qin Liu
- Robust neuro-fuzzy sliding mode control with extended state observer for an electric drive system pp. 1054-1063

- Ibrahim Farouk Bouguenna, Ahmed Azaiz, Ahmed Tahour and Ahmed Larbaoui
- Energy consumption, carbon dioxide emissions, information and communications technology, and gross domestic product in Iranian economic sectors: A panel causality analysis pp. 1064-1078

- Zahra Dehghan Shabani and Rouhollah Shahnazi
- Investigation of onboard fuel separation for passenger vehicles pp. 1079-1089

- Ahmad Khan, Kai Morganti, Marwan Sendi, Mohammed Almansour and Esam Hamad
- Pressure boost thermochemical sorption heat pump cycle pp. 1090-1100

- Peng Gao, Liang-Liang Shao and Chun-Lu Zhang
- Numerical investigations of the impact of inflow conditions on characteristics of a large-scale pyrolysis unit pp. 1101-1111

- Hassan Khodaei, Chris Olson and Petr Nikrityuk
- Super-knock suppression for highly turbocharged spark ignition engines using the fuel of propane or methanol pp. 1112-1118

- Hui Liu, Zhi Wang, Yunliang Qi, Xin He, Yingdi Wang and Jianxin Wang
- Strategies for decarbonising the Swiss heating system pp. 1119-1131

- Kapil Narula, Jonathan Chambers, Kai N. Streicher and Martin K. Patel
- Determinants of household energy use and fuel switching behavior in Nepal pp. 1132-1138

- Bikram Acharya and Klaus Marhold
- Performance analysis of low speed axial impulse turbine using two type nozzles for small-scale organic Rankine cycle pp. 1139-1152

- Hongchuang Sun, Jiang Qin, Tzu-Chen Hung, Hongyan Huang and Peigang Yan
- From lab-to-road & vice-versa: Using a simulation-based approach for predicting real-world CO2 emissions pp. 1153-1165

- Stefanos Tsiakmakis, Georgios Fontaras, Jan Dornoff, Victor Valverde, Dimitrios Komnos, Biagio Ciuffo, Peter Mock and Zissis Samaras
- Impact of external shading strategy on energy performance of multi-story hotel building in hot-humid climate pp. 1166-1174

- Waleed Khalid Alhuwayil, Muhammad Abdul Mujeebu and Ali Mohammed M. Algarny
- Syngas production from oil sludge gasification and its potential use in power generation systems: An energy and exergy analysis pp. 1175-1190

- Aldemar Martínez González, Electo Eduardo Silva Lora and José Carlos Escobar Palacio
- Analysis and improvement of dynamic heat exchanger models for nominal and start-up operation pp. 1191-1201

- Yannic Vaupel, Wolfgang R. Huster, Flemming Holtorf, Adel Mhamdi and Alexander Mitsos
- The effect of air/fuel ratio on the CO and NOx emissions for a twin-spark motorcycle gasoline engine under wide range of operating conditions pp. 1202-1213

- Banglin Deng, Qing Li, Yangyang Chen, Meng Li, Aodong Liu, Jiaqi Ran, Ying Xu, Xiaoqiang Liu, Jianqin Fu and Renhua Feng
- Performance analysis and experimental validation of a solar-assisted heat pump fed by photovoltaic-thermal collectors pp. 1214-1223

- Alejandro Del Amo, Amaya Martínez-Gracia, Angel A. Bayod-Rújula and Marta Cañada
- Inter- and intra-annual variability of potential power production from wave energy converters pp. 1224-1241

- Joao Morim, Nick Cartwright, Mark Hemer, Amir Etemad-Shahidi and Darrell Strauss
- Cooperative controls of micro gas turbine and super capacitor hybrid power generation system for pulsed power load pp. 1242-1258

- Jiandong Duan, Junjie Liu, Qian Xiao, Shaogui Fan, Li Sun and Guanglin Wang
- Assessment of optimized pattern in milling factories of rice production based on energy, environmental and economic objectives pp. 1259-1273

- Ashkan Nabavi-Pelesaraei, Shahin Rafiee, Seyed Saeid Mohtasebi, Homa Hosseinzadeh-Bandbafha and Kwok-wing Chau
- Energy performance and economic analysis of a TIM-PCM wall under different climates pp. 1274-1291

- Farah Souayfane, Pascal Henry Biwole, Farouk Fardoun and Patrick Achard
| | |
|