|
|
Energy
1976 - 2025
Current editor(s): Henrik Lund and Mark J. Kaiser From Elsevier Bibliographic data for series maintained by Catherine Liu (repec@elsevier.com). Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.
Volume 93, issue P2, 2015
- Electrodeposition of three-dimensional ZnO@MnO2 core–shell nanocables as high-performance electrode material for supercapacitors pp. 1259-1266

- Chuanjun Yuan, Haibo Lin, Haiyan Lu, Endong Xing, Yusi Zhang and Bingyao Xie
- Comparative study on the performance and exergy efficiency of a solar hybrid heat pump using R22 and R744 pp. 1267-1276

- Honghyun Cho
- A hybrid life cycle assessment of the vehicle-to-grid application in light duty commercial fleet pp. 1277-1286

- Yang Zhao and Omer Tatari
- Exergoeconomic evaluation of an ethanol-fueled solid oxide fuel cell power plant pp. 1287-1295

- Yannay Casas Ledón, Luis E. Arteaga-Perez, Juan Toledo and Jo Dewulf
- Wind-speed prediction and analysis based on geological and distance variables using an artificial neural network: A case study in South Korea pp. 1296-1302

- Junmo Koo, Gwon Deok Han, Hyung Jong Choi and Joon Hyung Shim
- 3D (3-dimensional) porous silver nonwoven mats prepared with cellulosic templates and spray equipment for use as supercapacitor current collectors pp. 1303-1307

- Yunseok Jang, Jeongdai Jo, Young-Man Choi, Sin Kwon and Kwang-Young Kim
- A framework for the reliability evaluation of grid-connected photovoltaic systems in the presence of intermittent faults pp. 1308-1320

- Baoping Cai, Yonghong Liu, Yunpeng Ma, Lei Huang and Zengkai Liu
- Characteristics of rice husk tar secondary thermal cracking pp. 1321-1327

- Ming Zhai, Xinyu Wang, Yu Zhang, Peng Dong, Guoli Qi and Yudong Huang
- Energy efficiency of China's industry sector: An adjusted network DEA (data envelopment analysis)-based decomposition analysis pp. 1328-1337

- Yingnan Liu and Ke Wang
- Effects of clamping force on the water transport and performance of a PEM (proton electrolyte membrane) fuel cell with relative humidity and current density pp. 1338-1344

- Dowon Cha, Jae Hwan Ahn, Hyung Soon Kim and Yongchan Kim
- Energy harvesting from high-rise buildings by a piezoelectric harvester device pp. 1345-1352

- X.D. Xie, Q. Wang and S.J. Wang
- Oil price crisis response: Capability assessment and key indicator identification pp. 1353-1360

- Keyi Ju, Bin Su, Dequn Zhou, P. Zhou and Yuqiang Zhang
- Accounting for hidden energy dependency: The impact of energy embodied in traded goods on cross-country energy security assessments pp. 1361-1372

- Markus Bortolamedi
- Modeling and simulation of a molten salt cavity receiver with Dymola pp. 1373-1384

- Qiangqiang Zhang, Xin Li, Zhifeng Wang, Jinbai Zhang, Baligh El-Hefni and Li Xu
- Research on the data transmission optimization for building energy consumption monitoring system based on fuzzy self-adaptation method pp. 1385-1393

- Liang Zhao and Jili Zhang
- Experimental investigations on using phase change material for performance improvement of storage-enhanced heat recovery room air-conditioner pp. 1394-1403

- Jie Jia and W.L. Lee
- Outdoor dry bulb heating design temperatures for Hungary pp. 1404-1412

- Zoltán Verbai, Imre Kocsis and Ferenc Kalmár
- Microwave-assist hydrothermal synthesis and luminescence of NaGd(WO4):Tb3+ phosphors: A case study for the energy saving in the synthesis of phosphors pp. 1413-1417

- Yongxin Liu, Xuejun Yue, Kun Cai, Haidong Deng and Ming Zhang
- Preference selection index approach for optimization of V down perforated baffled roughened rectangular channel pp. 1418-1425

- Sunil Chamoli
- Energy economics in the manufacturing industry: A return on investment strategy pp. 1426-1435

- Michael P. Brundage, Qing Chang, Jing Zou, Yang Li, Jorge Arinez and Guoxian Xiao
- Fast pyrolysis of macroalga Saccharina japonica in a bubbling fluidized-bed reactor for bio-oil production pp. 1436-1446

- Hoang Vu Ly, Seung-Soo Kim, Hee Chul Woo, Jae Hyung Choi, Dong Jin Suh and Jinsoo Kim
- Optimizing renewable energy, demand response and energy storage to replace conventional fuels in Ontario, Canada pp. 1447-1455

- David B. Richardson and L.D. Danny Harvey
- Short-term wind speed prediction using empirical wavelet transform and Gaussian process regression pp. 1456-1466

- Jianming Hu and Jianzhou Wang
- Tracking collector consideration of tilted collector solar updraft tower power plant under Malaysia climate conditions pp. 1467-1477

- Ali Ahmed Gitan, Shaymaa Husham Abdulmalek and Salwan S. Dihrab
- Optimization of velocity for energy saving and mitigating fouling in a crude oil preheat train with fixed network structure pp. 1478-1488

- Yufei Wang, Shihui Zhan and Xiao Feng
- Impact of powertrain electrification, vehicle size reduction and lightweight materials substitution on energy use, CO2 emissions and cost of a passenger light-duty vehicle fleet pp. 1489-1504

- Juan C. González Palencia, Tsukasa Sakamaki, Mikiya Araki and Seiichi Shiga
- Rapid-compression machine studies on two-stage ignition characteristics of hydrocarbon autoignition and an investigation of new gasoline surrogates pp. 1505-1514

- Jinhwa Chung, Seunghyeon Lee, Hyunsoo An, Soonho Song and Kwang Min Chun
- An improved free search differential evolution algorithm: A case study on parameters identification of one diode equivalent circuit of a solar cell module pp. 1515-1522

- Helon Vicente Hultmann Ayala, Leandro dos Santos Coelho, Viviana Cocco Mariani and Alireza Askarzadeh
- Theoretical and experimental investigation of a closed sorption thermal storage prototype using LiCl/water pp. 1523-1534

- N. Yu, R.Z. Wang and L.W. Wang
- Experimental study of slight temperature rise combustion in trapped vortex combustors for gas turbines pp. 1535-1547

- R.C. Zhang, W.J. Fan, F. Xing, S.W. Song, Q. Shi, G.H. Tian and W.L. Tan
- Energy performance and efficiency of two sugar crops for the biofuel supply chain. Perspectives for sustainable field management in southern Italy pp. 1548-1557

- Pasquale Garofalo, Laura D'Andrea, A. Vittorio Vonella, Michele Rinaldi and A. Domenico Palumbo
- Appraisal of the support vector machine to forecast residential heating demand for the District Heating System based on the monthly overall natural gas consumption pp. 1558-1567

- Nima Izadyar, Hossein Ghadamian, Hwai Chyuan Ong, Zeinab Moghadam, Chong Wen Tong and Shahaboddin Shamshirband
- Simulation of a multiple heat source supercritical ORC (Organic Rankine Cycle) for vehicle waste heat recovery pp. 1568-1580

- Stephen Glover, Roy Douglas, Mattia De Rosa, Xiaolei Zhang and Laura Glover
- Optimal dynamic allocation of mobile plants to monetize associated or stranded natural gas, part I: Bakken shale play case study pp. 1581-1594

- Siah Hong Tan and Paul I. Barton
- Impacts of renewable energy system design inputs on the performance robustness of net zero energy buildings pp. 1595-1606

- Yuehong Lu, Shengwei Wang, Chengchu Yan and Kui Shan
- The tug-of-war between resource depletion and technological change in the global oil industry 1981–2009 pp. 1607-1616

- Lars Lindholt
- Characterising a turbine for application in an organic Rankine cycle pp. 1617-1632

- B. Ssebabi, R.T. Dobson and A.B. Sebitosi
- Assessment of the safe operation and maintenance of photovoltaic systems pp. 1633-1638

- Sotiris N. Kamenopoulos and Theocharis Tsoutsos
- Thermodynamic analysis of a liquid air energy storage system pp. 1639-1647

- Giuseppe Leo Guizzi, Michele Manno, Ludovica Maria Tolomei and Ruggero Maria Vitali
- Solar pyrolysis of beech wood: Effects of pyrolysis parameters on the product distribution and gas product composition pp. 1648-1657

- Kuo Zeng, Daniel Gauthier, Rui Li and Gilles Flamant
- Measurements of integrated direct, diffuse and global ultraviolet-B radiation pp. 1658-1662

- M.P. Utrillas, R. Pedrós, S. Gandía, J.L. Gómez-Amo, V. Estellés and J.A. Martínez-Lozano
- Prediction of steam-assisted gravity drainage steam to oil ratio from reservoir characteristics pp. 1663-1670

- Oguz Akbilgic, Da Zhu, Ian D. Gates and Joule A. Bergerson
- A comparative study on prediction methods for China's medium- and long-term coal demand pp. 1671-1683

- Bing-Bing Li, Qiao-Mei Liang and Jin-Cheng Wang
- Nanoencapsulation of n-octadecane phase change material with silica shell through interfacial hydrolysis and polycondensation in miniemulsion pp. 1684-1692

- Shuen Liang, Qianbiao Li, Yalin Zhu, Keping Chen, Chunrong Tian, Jianhua Wang and Ruke Bai
- Optimal distribution feeder reconfiguration for increasing the penetration of plug-in electric vehicles and minimizing network costs pp. 1693-1703

- Abdollah Kavousi-Fard, Alireza Abbasi, Mohammad-Amin Rostami and Abbas Khosravi
- Appraisal of artificial neural network-genetic algorithm based model for prediction of the power provided by the agricultural tractors pp. 1704-1710

- Hamid Taghavifar, Aref Mardani and Ashkan Haji Hosseinloo
- Cuckoo optimization algorithm with penalty function for combined heat and power economic dispatch problem pp. 1711-1718

- Mohamed Arezki Mellal and Edward J. Williams
- Entropy production and economic analysis in diabatic distillation columns with heat exchangers in series pp. 1719-1730

- J.Rafael Alcántara-Avila, Ken-Ichiro Sotowa and Toshihide Horikawa
- Torrefaction of wood and bark from Eucalyptus globulus and Eucalyptus nitens: Focus on volatile evolution vs feasible temperatures pp. 1731-1741

- Luis E. Arteaga-Pérez, Cristina Segura, Verónica Bustamante-García, Oscar Gómez Cápiro and Romel Jiménez
- Soybean waste (okara) as a valorization biomass for the bioethanol production pp. 1742-1747

- In Seong Choi, Young Gyu Kim, Ja Kyun Jung and Hyeun-Jong Bae
- Development and characterization of a new embedded ionic liquid based membrane-cathode assembly for its application in single chamber microbial fuel cells pp. 1748-1757

- V.M. Ortiz-Martínez, M.J. Salar-García, F.J. Hernández-Fernández and A.P. de los Ríos
- Effects of the injection strategy on the mixture formation and combustion characteristics in a DISI (direct injection spark ignition) optical engine pp. 1758-1768

- Jingeun Song, Taehoon Kim, Jihwan Jang and Sungwook Park
- Comparison and verification of wake models in an onshore wind farm considering single wake condition of the 2 MW wind turbine pp. 1769-1777

- Sanghyeon Jeon, Bumsuk Kim and Jongchul Huh
- Exergy analysis of a coal/biomass co-hydrogasification based chemical looping power generation system pp. 1778-1787

- Linbo Yan, Guangxi Yue and Boshu He
- Effect of number of supports on the bending of absorber tube of parabolic trough concentrator pp. 1788-1803

- Sourav Khanna and Vashi Sharma
- A comprehensive sensitivity study of major passive design parameters for the public rental housing development in Hong Kong pp. 1804-1818

- Xi Chen, Hongxing Yang and Weilong Zhang
- Optimal supervisory control of steam generators operating in parallel pp. 1819-1831

- Vicente Costanza and Pablo S. Rivadeneira
- Comprehensive exergy analysis of an industrial-scale yogurt production plant pp. 1832-1851

- Majid Jafaryani Jokandan, Mortaza Aghbashlo and Seyed Saeid Mohtasebi
- An extension of the Generalized Actuator Disc Theory for aerodynamic analysis of the diffuser-augmented wind turbines pp. 1852-1859

- Yingyi Liu and Shigeo Yoshida
- Electricity generation and heating potential from enhanced geothermal system in Songliao Basin, China: Different reservoir stimulation strategies for tight rock and naturally fractured formations pp. 1860-1885

- Yan-Jun Zhang, Liang-Liang Guo, Zheng-Wei Li, Zi-Wang Yu, Tian-Fu Xu and Cheng-Yu Lan
- Main parameters optimization of regenerative organic Rankine cycle driven by low-temperature flue gas waste heat pp. 1886-1895

- Zhong Ge, Hua Wang, Hui-Tao Wang, Jian-Jun Wang, Ming Li, Fu-Zhong Wu and Song-Yuan Zhang
- Temperature fields induced by geothermal devices pp. 1896-1903

- V. Ciriello, M. Bottarelli, V. Di Federico and D.M. Tartakovsky
- Spatial modeling of lignite energy reserves for exploitation planning and quality control pp. 1906-1917

- Andreas Pavlides, Dionissios T. Hristopulos, Christos Roumpos and Zach Agioutantis
- Solar energy prediction and verification using operational model forecasts and ground-based solar measurements pp. 1918-1930

- P.G. Kosmopoulos, S. Kazadzis, K. Lagouvardos, V. Kotroni and A. Bais
- Performance analysis of energy storage system based on liquid carbon dioxide with different configurations pp. 1931-1942

- Mingkun Wang, Pan Zhao, Yi Yang and Yiping Dai
- Improving OWC performance prediction using polychromatic waves pp. 1943-1952

- Tom Mitchell Ferguson, Alan Fleming, Irene Penesis and Gregor Macfarlane
- Investigation and modeling of the tractive performance of radial tires using off-road vehicles pp. 1953-1963

- Şerafettin Ekinci, Kazım Çarman and Humar Kahramanlı
- Methods for evaluation of energy efficiency of machine tools pp. 1964-1970

- Timo Schudeleit, Simon Züst and Konrad Wegener
- Effects of C3H8 on hydrate formation and dissociation for integrated CO2 capture and desalination technology pp. 1971-1979

- Mingjun Yang, Jianan Zheng, Weiguo Liu, Yu Liu and Yongchen Song
- Energy efficiency of different impellers in stirred tank reactors pp. 1980-1988

- Houari Ameur
- The recent change in the Italian policies for photovoltaics: Effects on the payback period and levelized cost of electricity of grid-connected photovoltaic systems installed in urban contexts pp. 1989-2005

- Aldo Orioli and Alessandra Di Gangi
- Power density optimization for micro thermoelectric generators pp. 2006-2017

- Marc T. Dunham, Michael T. Barako, Saniya LeBlanc, Mehdi Asheghi, Baoxing Chen and Kenneth E. Goodson
- Performance comparison of low-grade ORCs (organic Rankine cycles) using R245fa, pentane and their mixtures based on the thermoeconomic multi-objective optimization and decision makings pp. 2018-2029

- Yongqiang Feng, TzuChen Hung, Yaning Zhang, Bingxi Li, Jinfu Yang and Yang Shi
- Effect of mixing on the performance of wet steam ejectors pp. 2030-2041

- Kavous Ariafar, David Buttsworth, Ghassan Al-Doori and Ray Malpress
- Energy efficiency improvement potentials for the cement industry in Ethiopia pp. 2042-2052

- Gudise Tesema and Ernst Worrell
- Numerical study on effect of oxygen content in combustion air on ammonia combustion pp. 2053-2068

- Jun Li, Hongyu Huang, Noriyuki Kobayashi, Zhaohong He, Yugo Osaka and Tao Zeng
- A dynamic model used for controller design of a coal fired once-through boiler-turbine unit pp. 2069-2078

- Ji-Zhen Liu, Shu Yan, De-Liang Zeng, Yong Hu and You Lv
- A hybrid system using a regenerative electrochemical cycle to harvest waste heat from the proton exchange membrane fuel cell pp. 2079-2086

- Rui Long, Baode Li, Zhichun Liu and Wei Liu
- International comparisons of energy and environmental efficiency in the road transport sector pp. 2087-2101

- Khaled Ben Abdallah, Mounir Belloumi and Daniel De Wolf
- Effective reduction of NOx emissions of a HCCI (Homogeneous charge compression ignition) engine by enhanced rate of heat transfer under varying conditions of operation pp. 2102-2115

- T. Karthikeya Sharma, G. Amba Prasad Rao and K. Madhu Murthy
- A novel twin-rotor radial-inflow air turbine for oscillating-water-column wave energy converters pp. 2116-2125

- António F.O. Falcão, Luís M.C. Gato, João C.C. Henriques, João E. Borges, Bruno Pereiras and Francisco Castro
- A simplified optimization model to short-term electricity planning pp. 2126-2135

- Sérgio Pereira, Paula Ferreira and A.I.F. Vaz
- Thermodynamic and thermoeconomic optimization of an integrated gas turbine and organic Rankine cycle pp. 2136-2145

- M. Khaljani, R. Khoshbakhti Saray and K. Bahlouli
- Parametric and optimization studies of reheat and regenerative Braysson cycle pp. 2146-2156

- R. Chandramouli, M.S.S. Srinivasa Rao and K. Ramji
- A mechanistic semi-empirical wake interaction model for wind farm layout optimization pp. 2157-2165

- Jim Y.J. Kuo, David A. Romero and Cristina H. Amon
- Determining efficiency of energy input for silage corn production: An econometric approach pp. 2166-2174

- Ehsan Houshyar, Hamid Reza Zareifard, Philipp Grundmann and Pete Smith
- Crisscross optimization algorithm for large-scale dynamic economic dispatch problem with valve-point effects pp. 2175-2190

- Anbo Meng, Hanwu Hu, Hao Yin, Xiangang Peng and Zhuangzhi Guo
- Net energy analysis of Bakken crude oil production using a well-level engineering-based model pp. 2191-2198

- Adam R. Brandt, Tim Yeskoo and Kourosh Vafi
- Improvement and experimental research of CO2 two-rolling piston expander pp. 2199-2207

- Jing Hu, Minxia Li, Li Zhao, Borui Xia and Yitai Ma
- Thermoeconomic multi-objective optimization of an organic Rankine cycle for exhaust waste heat recovery of a diesel engine pp. 2208-2228

- Fubin Yang, Hongguang Zhang, Songsong Song, Chen Bei, Hongjin Wang and Enhua Wang
- A novel application for energy efficiency improvement using nanofluid in shell and tube heat exchanger equipped with helical baffles pp. 2229-2240

- Mehdi Bahiraei, Morteza Hangi and Mahdi Saeedan
- Performance and emission characteristics of a high-compression-ratio diesel engine fueled with wood pyrolysis oil-butanol blended fuels pp. 2241-2250

- Tae Young Kim, Seokhwan Lee and Kernyong Kang
- In-situ transesterification of Jatropha oil over an efficient solid alkali using low leaching component supported on industrial silica gel pp. 2251-2257

- Kun Qian, Xiang Shen, Yanxin Wang, Qiang Gao and Hongwei Ding
- Development of high efficiency cycles for domestic refrigerator-freezer application pp. 2258-2266

- Mina Yang, Chung Woo Jung and Yong Tae Kang
- Advanced exergy and environmental analyses and multi objective optimization of a real combined cycle power plant with supplementary firing using evolutionary algorithm pp. 2267-2279

- Fateme Ahmadi Boyaghchi and Hanieh Molaie
- Numerical investigation of the effect split injection scheme on exergy terms in an IDI (indirect injection) diesel engine by three dimensional modeling pp. 2280-2291

- Samad Jafarmadar and Peyman Nemati
- Optimal profile of heat transfer pin fins under technological constraints pp. 2292-2298

- Viorel Badescu
- Reliability improvement in radial electrical distribution network by optimal planning of energy storage systems pp. 2299-2312

- Hedayat Saboori, Reza Hemmati and Mehdi Ahmadi Jirdehi
- A novel approach for measuring bubbles uniformity and mixing efficiency in a direct contact heat exchanger pp. 2313-2320

- Yu Fei, Qingtai Xiao, Jianxin Xu, Jianxin Pan, Shibo Wang, Hua Wang and Junwei Huang
- Economic, energy, and environmental impacts of alcohol dehydration technology on biofuel production from brown algae pp. 2321-2336

- Peyman Fasahati and J. Jay Liu
- A bottom-up and procedural calibration method for building energy simulation models based on hourly electricity submetering data pp. 2337-2350

- Ying Ji and Peng Xu
- Valuing crop diversity in biodiesel production plans pp. 2351-2362

- Antonella Baglivi, Giulia Fiorese, Giorgio Guariso and Clara Uggè
- Experimental study of a 1 kw organic Rankine cycle with a zeotropic mixture of R245fa/R134a pp. 2363-2373

- Gholamreza Bamorovat Abadi, Eunkoo Yun and Kyung Chun Kim
- Modelling and testing the performance of a commercial ammonia/water absorption chiller using Aspen-Plus platform pp. 2374-2383

- Rami Mansouri, Ismail Boukholda, Mahmoud Bourouis and Ahmed Bellagi
- Experimental investigation of pyrolysis of rice straw using bench-scale auger, batch and fluidized bed reactors pp. 2384-2394

- Hyungseok Nam, Sergio C. Capareda, Nanjappa Ashwath and Jinjuta Kongkasawan
- Extended Euler–Euler model for the simulation of a 1 MWth chemical–looping pilot plant pp. 2395-2405

- Falah Alobaid, Peter Ohlemüller, Jochen Ströhle and Bernd Epple
- A new forecasting framework for volatile behavior in net electricity consumption: A case study in Turkey pp. 2406-2422

- Salih Tutun, Chun-An Chou and Erdal Canıyılmaz
- The long-term forecast of Pakistan's electricity supply and demand: An application of long range energy alternatives planning pp. 2423-2435

- Usama Perwez, Ahmed Sohail, Syed Fahad Hassan and Usman Zia
- Synergy of air pollutants and greenhouse gas emissions of Chinese industries: A critical assessment of energy models pp. 2436-2450

- Shaohui Zhang, Ernst Worrell and Wina Crijns-Graus
- Numerical investigation of flow characteristics, heat transfer and entropy generation of nanofluid flow inside an annular pipe partially or completely filled with porous media using two-phase mixture model pp. 2451-2466

- Majid Siavashi, Hamid Reza Talesh Bahrami and Hamid Saffari
- A meta-heuristic method to design off-grid community electrification projects with renewable energies pp. 2467-2482

- Matteo Ranaboldo, Alberto García-Villoria, Laia Ferrer-Martí and Rafael Pastor Moreno
- Hydrodynamic performance prediction of a tidal current turbine operating in non-uniform inflow conditions pp. 2483-2496

- Fergal O'Rourke, Fergal Boyle, Anthony Reynolds and David M. Kennedy
- Performance of dry anaerobic technology in the co-digestion of rural organic solid wastes in China pp. 2497-2502

- Tianxue Yang, Yingjun Li, Jixi Gao, Caihong Huang, Bin Chen, Lieyu Zhang, Xiaowei Wang, Ying Zhao, Beidou Xi and Xiang Li
- Performance assessment of a natural gas expansion plant integrated with a vertical ground-coupled heat pump pp. 2503-2517

- Reza Ghezelbash, Mahmood Farzaneh-Gord, Hamidreza Behi, Meisam Sadi and Heshmatollah Shams Khorramabady
- The chaotic global best artificial bee colony algorithm for the multi-area economic/emission dispatch pp. 2518-2545

- Dinu Calin Secui
- Modeling and optimization of a network of energy hubs to improve economic and emission considerations pp. 2546-2558

- Azadeh Maroufmashat, Ali Elkamel, Michael Fowler, Sourena Sattari, Ramin Roshandel, Amir Hajimiragha, Sean Walker and Evgueniy Entchev
- Explicit analytic solution for heat and mass transfer in a desiccant wheel using a simplified model pp. 2559-2567

- Hyungmook Kang, Gilbong Lee and Dae-Young Lee
- Flexible electricity tariffs: Power and energy price signals designed for a smarter grid pp. 2568-2581

- Michael Schreiber, Martin E. Wainstein, Patrick Hochloff and Roger Dargaville
- Two-dimensional thermosolutal natural convective heat and mass transfer in a bi-layered and inclined porous enclosure pp. 2582-2592

- N. Hadidi, R. Bennacer and Y. Ould-amer
- Design and analysis of a dead volume control for a solar Stirling engine with induction generator pp. 2593-2603

- Ricardo Beltrán-Chacon, Daniel Leal-Chavez, D. Sauceda, Manuel Pellegrini-Cervantes and Mónica Borunda
- Optimized design of impulse turbines in the micro-hydro sector concerning air detrainment processes pp. 2604-2613

- Matthias Kramer, Kristina Terheiden and Silke Wieprecht
- A study of the impact of building geometry on the thermal performance of road pavement solar collectors pp. 2614-2630

- Diana S.N.M. Nasir, Ben Richard Hughes and John Kaiser Calautit
Volume 93, issue P1, 2015
- Integration of CO2 cryogenic removal with a natural gas pressurized liquefaction process using gas expansion refrigeration pp. 1-9

- Xiaojun Xiong, Wensheng Lin and Anzhong Gu
- Exergy loss minimization for a blast furnace with comparative analyses for energy flows and exergy flows pp. 10-19

- Xiong Liu, Lingen Chen, Xiaoyong Qin and Fengrui Sun
- Study on CO2 capture from molten carbonate fuel cell hybrid system integrated with oxygen ion transfer membrane pp. 20-30

- Liqiang Duan, Long Yue, Wanjun Qu and Yongping Yang
- Energetic and economic evaluation of Chlamydomonas reinhardtii hydrothermal liquefaction and pyrolysis through thermochemical models pp. 31-40

- Céline Hognon, Florian Delrue and Guillaume Boissonnet
- A robust combination approach for short-term wind speed forecasting and analysis – Combination of the ARIMA (Autoregressive Integrated Moving Average), ELM (Extreme Learning Machine), SVM (Support Vector Machine) and LSSVM (Least Square SVM) forecasts using a GPR (Gaussian Process Regression) model pp. 41-56

- Jianzhou Wang and Jianming Hu
- Experimental study on the start-up with dry gases from normal cell temperatures in self-humidified proton exchange membrane fuel cells pp. 57-66

- Im Mo Kong, Aeri Jung, Beom Jun Kim, Kyung Don Baik and Min Soo Kim
- Empty promises or promising futures? The case of smart grids pp. 67-74

- Zora Kovacic and Mario Giampietro
- Comparative analysis and evaluation of turbocharged Dual and Miller cycles under different operating conditions pp. 75-87

- Sipeng Zhu, Kangyao Deng, Sheng Liu and Shuan Qu
- Performance study of SAPO-34 and FAPO-34 desiccants for desiccant coated heat exchanger systems pp. 88-94

- X. Zheng, R.Z. Wang, T.S. Ge and L.M. Hu
- Efficiency improvement and CO2 emission reduction potentials in the United States petroleum refining industry pp. 95-105

- William R. Morrow, John Marano, Ali Hasanbeigi, Eric Masanet and Jayant Sathaye
- Heat transfer and second law analyses of forced convection in a channel partially filled by porous media and featuring internal heat sources pp. 106-127

- Mohsen Torabi, Nader Karimi and Kaili Zhang
- Dimensionless design approach, applicability and energy performance of stack-based hybrid ventilation for multi-story buildings pp. 128-140

- Dong Yang and Ping Li
- Heat transfer analysis of metal oxide surge arrester under power frequency applied voltage pp. 141-153

- Seyyed Meysam Seyyedbarzegar and Mohammad Mirzaie
- Entropy generation analysis of laminar flow of a nanofluid in a circular tube immersed in an isothermal external fluid pp. 154-164

- Vishal Anand
- Performance analysis of a solar-powered solid state heat engine for electricity generation pp. 165-172

- Rui Long, Baode Li, Zhichun Liu and Wei Liu
- Design of fuzzy sliding mode controller for hydraulic turbine regulating system via input state feedback linearization method pp. 173-187

- Xiaohui Yuan, Zhihuan Chen, Yanbin Yuan and Yuehua Huang
- A mathematical tool for predicting thermal performance of natural draft biomass cookstoves and identification of a new operational parameter pp. 188-201

- Milind P. Kshirsagar and Vilas R. Kalamkar
- An experimental investigation on a novel ejector enhanced refrigeration cycle applied in the domestic refrigerator-freezer pp. 202-209

- Xiao Wang and Jianlin Yu
- Cyclic ultracapacitor for fast-charging and scalable energy storage system pp. 210-219

- Sun-Hwa Yeon, Dong-Ha Kim, Daewi Kim, Se-Kook Park, Hana Yoon, Jungjoon Yoo, Kyoung-Hee Shin, Chang-Soo Jin, Yun Jung Lee and Sang-Young Lee
- Multi-period analysis of heat integration measures in industrial clusters pp. 220-234

- Stephane Bungener, Roman Hackl, Greet Van Eetvelde, Simon Harvey and Francois Marechal
- Optimal planning of combined heat and power systems within microgrids pp. 235-244

- Aboelsood Zidan, Hossam A. Gabbar and Ahmed Eldessouky
- Novel activity classification and occupancy estimation methods for intelligent HVAC (heating, ventilation and air conditioning) systems pp. 245-255

- Rajib Rana, Brano Kusy, Josh Wall and Wen Hu
- Exergetic analysis of a brackish water reverse osmosis desalination unit with various energy recovery systems pp. 256-265

- Bilal Ahmed Qureshi and Syed M. Zubair
- Evaluation of R-1234ze(Z) as drop-in replacement for R-245fa in Organic Rankine Cycles – From thermophysical properties to cycle performance pp. 266-274

- Philipp Petr and Gabriele Raabe
- A robust demand response control of commercial buildings for smart grid under load prediction uncertainty pp. 275-283

- Dian-ce Gao, Yongjun Sun and Yuehong Lu
- Effects of 2,5-dimethylfuran fuel properties coupling with EGR (exhaust gas recirculation) on combustion and emission characteristics in common-rail diesel engines pp. 284-293

- Guisheng Chen, Lei Di, Quanchang Zhang, Zunqing Zheng and Wei Zhang
- Economic and policy evaluation of SPCC (solar-assisted post-combustion carbon capture) in Australia pp. 294-308

- Abdul Qadir, Lucy Carter, Tony Wood and Ali Abbas
- Nonlinear multivariable hierarchical model predictive control for boiler-turbine system pp. 309-322

- Xiaobing Kong, Xiangjie Liu and Kwang Y. Lee
- Optimization of transit bus fleet's life cycle assessment impacts with alternative fuel options pp. 323-334

- Tolga Ercan, Yang Zhao, Omer Tatari and Jennifer A. Pazour
- A modified basin type solar still: Experimental performance and economic study pp. 335-342

- Ayman G.M. Ibrahim, Elsayed E. Allam and Salman E. Elshamarka
- Chemical storage of wind energy by renewable methanol production: Feasibility analysis using a multi-criteria decision matrix pp. 343-353

- Michael Matzen, Mahdi Alhajji and Yaşar Demirel
- Influence of thermal shock on fouling of smooth, rough and finned tubes pp. 354-360

- E. Bishara, M.S. Abd-Elhady and M.A. Halim
- Fuel poverty, affordability, and energy justice in England: Policy insights from the Warm Front Program pp. 361-371

- Benjamin K. Sovacool
- A comparison of simulated annealing schedules for constructal design of complex cavities intruded into conductive walls with internal heat generation pp. 372-382

- G.V. Gonzales, E. da S.D. Estrada, L.R. Emmendorfer, L.A. Isoldi, G. Xie, L.A.O. Rocha and E.D. dos Santos
- Effects of direct injection timing and premixed ratio on combustion and emissions characteristics of RCCI (Reactivity Controlled Compression Ignition) with N-heptane/gasoline-like fuels pp. 383-392

- Lifeng Zhu, Yong Qian, Xiaole Wang and Xingcai Lu
- Challenges in load balance due to renewable energy sources penetration: The possible role of energy storage technologies relative to the Italian case pp. 393-405

- L. Barelli, U. Desideri and A. Ottaviano
- Accurate assessment of the output energy from the doubly fed induction generators pp. 406-415

- Eyhab El-Kharashi and Azmy Wadie Farid
- Analytical insight into the oxygen diffusion in wetted porous cathodes of Li-air batteries pp. 416-420

- Luhan Ye, Xiaoning Wang, Weiqiang Lv, Jipeng Fei, Gaolong Zhu, Yachun Liang, Yuanqiang Song, Junyi Zhai and Weidong He
- Assessment of the energy and exergy efficiencies of farm to fork grain cultivation and bread making processes in Turkey and Germany pp. 421-434

- Bahar Degerli, Serap Nazir, Esra Sorgüven, Bernd Hitzmann and Mustafa Özilgen
- Fabrication of Co3O4@Co–Ni sulfides core/shell nanowire arrays as binder-free electrode for electrochemical energy storage pp. 435-441

- Wei Hong, Jinqing Wang, Zhangpeng Li and Shengrong Yang
- Extinction limits and structure of counterflow nonpremixed H2O-laden CH4/air flames pp. 442-450

- Seungro Lee, Rosa Padilla, Derek Dunn-Rankin, Trinh Pham and Oh Chae Kwon
- Experimental researches on hydrogen generation by aluminum with adding lithium at high temperature pp. 451-457

- Weijuan Yang, Tianyou Zhang, Jianzhong Liu, Zhihua Wang, Junhu Zhou and Kefa Cen
- Modeling of combustion of gas oil and natural gas in a furnace: Comparison of combustion characteristics pp. 458-465

- Seyyed Shahabeddin Azimi and Mohammad Hosain Namazi
- A review of geothermal energy resources, development, and applications in China: Current status and prospects pp. 466-483

- Jialing Zhu, Kaiyong Hu, Xinli Lu, Xiaoxue Huang, Ketao Liu and Xiujie Wu
- Recuperated power cycle analysis model: Investigation and optimisation of low-to-moderate resource temperature Organic Rankine Cycles pp. 484-494

- Carlos A. de M. Ventura and Andrew S. Rowlands
- Regional total-factor energy efficiency and electricity saving potential of manufacturing industry in Turkey pp. 495-510

- Yücel Özkara and Mehmet Atak
- Experimental investigation of the effect of compression ratio, injection timing & pressure in a DI (direct injection) diesel engine running on carbon black-water-diesel emulsion pp. 511-520

- Arun Kumar Wamankar, Ashok Kumar Satapathy and S. Murugan
- Ship weight reduction and efficiency enhancement through combined power cycles pp. 521-533

- Alejandro Rivera-Alvarez, Michael J. Coleman and Juan C. Ordonez
- Small and flat worlds: A complex network analysis of international trade in crude oil pp. 534-543

- Yu Yang, Jessie P.H. Poon, Yi Liu and Sharmistha Bagchi-Sen
- Screening of supported and unsupported Mn–Si oxygen carriers for CLOU (chemical-looping with oxygen uncoupling) pp. 544-554

- Volkmar Frick, Magnus Rydén, Henrik Leion, Tobias Mattisson and Anders Lyngfelt
- Exergoeconomic analysis and optimization of a triple-pressure combined cycle plant using evolutionary algorithm pp. 555-567

- Sina Kazemi Bakhshmand, Rahim Khoshbakhti Saray, Keyvan Bahlouli, Hajar Eftekhari and Afshin Ebrahimi
- Effect of a glycerol-derived advanced biofuel –FAGE (fatty acid formal glycerol ester)– on the emissions of a diesel engine tested under the New European Driving Cycle pp. 568-579

- Magín Lapuerta, José Rodríguez-Fernández and Reyes García-Contreras
- Iterative Bass Model forecasts for unconventional oil production in the Eagle Ford Shale pp. 580-588

- Thomas Tunstall
- China's photovoltaic power development under policy incentives: A system dynamics analysis pp. 589-598

- Xiaodan Guo and Xiaopeng Guo
- Mass transport optimization in the anode diffusion layer of a micro direct methanol fuel cell pp. 599-605

- Zhenyu Yuan, Jie Yang, Yufeng Zhang, Shikai Wang and Tingnian Xu
- The assessment of Virginia mallow (Sida hermaphrodita Rusby) and cup plant (Silphium perfoliatum L.) productivity, physico–mechanical properties and energy expenses pp. 606-612

- Gintaras Šiaudinis, Algirdas Jasinskas, Egidijus Šarauskis, Dainius Steponavičius, Danutė Karčauskienė and Inga Liaudanskienė
- Effect of temperature, suction head and flow velocity on cavitation in a Francis turbine of small hydro power plant pp. 613-624

- Pankaj P. Gohil and R.P. Saini
- The hydrogen storage properties of MgH2–Fe3S4 composites pp. 625-630

- Wei Zhang, Ying Cheng, Da Han and Shumin Han
- On flame propagation in narrow channels with enhanced wall thermal conduction pp. 631-640

- Ananthanarayanan Veeraragavan
- Energy–exergy analysis and optimisation of a model sugar factory in Turkey pp. 641-654

- Tolga Taner and Mecit Sivrioglu
- Hourly electricity consumption in Norwegian households – Assessing the impacts of different heating systems pp. 655-671

- A. Kipping and E. Trømborg
- Prospects for bioenergy use in Ghana using Long-range Energy Alternatives Planning model pp. 672-682

- Francis Kemausuor, Ivan Nygaard and Gordon Mackenzie
- Wave energy resource assessment in Uruguay pp. 683-696

- Rodrigo Alonso, Sebastián Solari and Luis Teixeira
- Biomethane and biocrude oil production from protein extracted residual Spirulina platensis pp. 697-704

- Naga Sirisha Parimi, Manjinder Singh, James R. Kastner and Keshav C. Das
- Certification prerequisites for activities related to the trading of demand response resources pp. 705-715

- Manuel Alcázar-Ortega, Carmen Calpe, Thomas Theisen and Javier Rodríguez-García
- Exergy analysis of a turbofan engine for an unmanned aerial vehicle during a surveillance mission pp. 716-729

- Yasin Şöhret, Ali Dinç and T. Hikmet Karakoç
- Exergy analysis of biohydrogen production from various carbon sources via anaerobic photosynthetic bacteria (Rhodospirillum rubrum) pp. 730-739

- Seyed Sina Hosseini, Mortaza Aghbashlo, Meisam Tabatabaei, Habibollah Younesi and Ghasem Najafpour
- Exergy analysis of combustion in VGT-modified diesel engine with detailed chemical kinetics mechanism pp. 740-748

- Hadi Taghavifar, Shahram Khalilarya and Samad Jafarmadar
- The effect of different co-catalysts (CuO, MoS2 and Pt) on hydrogen production of Er3+:YAlO3/NaTaO3 by visible-light-induced methanol splitting pp. 749-757

- Chunxiao Lu, Yang Chen, Yun Li, Chunhong Ma, Yuwei Guo, Ying Li and Jun Wang
- Experimental investigations on thermal performance of phase change material – Trombe wall system enhanced by delta winglet vortex generators pp. 758-769

- Guobing Zhou and Mengmeng Pang
- Novel inlet air cooling with gas turbine engines using cascaded waste-heat recovery for green sustainable energy pp. 770-785

- Yousef S.H. Najjar, Ahmad M. Abubaker and Ahmad F.S. El-Khalil
- Study on adsorption refrigeration performance of MIL-101-isobutane working pair pp. 786-794

- Liejun Ma, Huan Yang, Qi Wu, Yu Yin, Zongjian Liu, Qun Cui and Haiyan Wang
- Application of the Miller cycle and turbo charging into a diesel engine to improve performance and decrease NO emissions pp. 795-800

- Guven Gonca, Bahri Sahin, Adnan Parlak, Vezir Ayhan, İdris Cesur and Sakip Koksal
- Modeling and performance analysis of CCHP (combined cooling, heating and power) system based on co-firing of natural gas and biomass gasification gas pp. 801-815

- Jiangjiang Wang, Tianzhi Mao, Jun Sui and Hongguang Jin
- Security constrained optimal power flow solution of wind-thermal generation system using modified bacteria foraging algorithm pp. 816-827

- Ambarish Panda and M. Tripathy
- Thermoacoustic prime movers and refrigerators: Thermally powered engines without moving components pp. 828-853

- Tao Jin, Jiale Huang, Ye Feng, Rui Yang, Ke Tang and Ray Radebaugh
- Experimental study of direct contact vaporization heat transfer on n-pentane-water flowing interface pp. 854-863

- Yiping Wang, Hailing Fu, Qunwu Huang, Yong Cui, Yong Sun and Lihong Jiang
- Assessment of municipal solid wastes gasification in a semi-industrial gasifier using syngas quality indices pp. 864-873

- Nuno Dinis Couto, Valter Bruno Silva, Eliseu Monteiro and Abel Rouboa
- Evaluating the cooling performance of crushed-rock interlayer embankments with unperforated and perforated ventilation ducts in permafrost regions pp. 874-881

- Mingyi Zhang, Xiyin Zhang, Shuangyang Li, Daoyong Wu, Wansheng Pei and Yuanming Lai
- Improving performance of two-phase natural circulation loops by reducing of entropy generation pp. 882-899

- N. Goudarzi and S. Talebi
- An efficient strategy exploiting the waste heat in a solid oxide fuel cell system pp. 900-907

- Yuan Wang, Ling Cai, Tie Liu, Junyi Wang and Jincan Chen
- Artificial neural network modeling of a photovoltaic-thermal evaporator of solar assisted heat pumps pp. 908-922

- N. Gunasekar, M. Mohanraj and V. Velmurugan
- Robust methodology for steady state measurements estimation based framework for a reliable long term thermal power plant operation performance monitoring pp. 923-944

- Luis Vazquez, Jesús María Blanco, Rolando Ramis, Francisco Peña and David Diaz
- Preparation and characterization of vacuum insulation panels with super-stratified glass fiber core material pp. 945-954

- Zhou Chen, Zhaofeng Chen, Zhaogang Yang, Jiaming Hu, Yong Yang, Lingqian Chang, L. James Lee and Tengzhou Xu
- Structurally modified cerium doped hydrotalcite-like precursor as efficient catalysts for hydrogen production from sodium borohydride hydrolysis pp. 955-962

- Ashif H. Tamboli, Amol R. Jadhav, Wook-Jin Chung and Hern Kim
- A study of feasible smart tariff alternatives for smart grid integrated solar panels in India pp. 963-975

- Jagruti Thakur and Basab Chakraborty
- Advances in CO2 gasification reactivity of biomass char through utilization of radio frequency irradiation pp. 976-983

- Pooya Lahijani, Maedeh Mohammadi, Zainal Alimuddin Zainal and Abdul Rahman Mohamed
- Thermodynamic study of a distiller-electrochemical cell system for energy production from low temperature heat sources pp. 984-993

- A. Carati, M. Marino and D. Brogioli
- Effect of coupling position on a looped three-stage thermoacoustically-driven pulse tube cryocooler pp. 994-998

- Jingyuan Xu, Jianying Hu, Limin Zhang, Wei Dai and Ercang Luo
- Sustainability in the food-energy-water nexus: Evidence from BRICS (Brazil, the Russian Federation, India, China, and South Africa) countries pp. 999-1010

- Ilhan Ozturk
- Mitigating crystallization of saturated FAMES in biodiesel: 5. The unusual phase behavior of a structured triacylglycerol dimer and methyl palmitate binary system pp. 1011-1021

- Athira Mohanan, Laziz Bouzidi, Shaojun Li and Suresh S. Narine
- Multi-objective optimization of a continuous thermally regenerative electrochemical cycle for waste heat recovery pp. 1022-1029

- Rui Long, Baode Li, Zhichun Liu and Wei Liu
- INVELOX with multiple wind turbine generator systems pp. 1030-1040

- Daryoush Allaei, David Tarnowski and Yiannis Andreopoulos
- Effect of the diesel injection strategy on the combustion and emissions of propane/diesel dual fuel premixed charge compression ignition engines pp. 1041-1052

- Jeongwoo Lee, Sanghyun Chu, Jaehyuk Cha, Hoimyung Choi and Kyoungdoug Min
- Renewable-based heat supply of multi-apartment buildings with varied heat demands pp. 1053-1062

- Nguyen Le Truong, Ambrose Dodoo and Leif Gustavsson
- Numerical investigation of a MCFC (Molten Carbonate Fuel Cell) system hybridized with a supercritical CO2 Brayton cycle and compared with a bottoming Organic Rankine Cycle pp. 1063-1073

- Andrea Baronci, Giuseppe Messina, Stephen J. McPhail and Angelo Moreno
- Validation of Danish wind time series from a new global renewable energy atlas for energy system analysis pp. 1074-1088

- Gorm B. Andresen, Anders A. Søndergaard and Martin Greiner
- Reducing the carbon footprint of urban bus fleets using multi-objective optimization pp. 1089-1104

- João P. Ribau, João M.C. Sousa and Carla M. Silva
- Properties of inverse nonpremixed pure O2/CH4 coflow flames in a model combustor pp. 1105-1115

- Sun Choi, Tae Young Kim, Hee Kyung Kim, Jaye Koo, Jeong Soo Kim and Oh Chae Kwon
- Optimization of hybrid renewable energy polygeneration system with membrane distillation for rural households in Bangladesh pp. 1116-1127

- Ershad Ullah Khan and Andrew R. Martin
- Mass-conserving dynamic organic Rankine cycle model to investigate the link between mass distribution and system state pp. 1128-1139

- Moslem Yousefzadeh and Eray Uzgoren
- Spectral characterization of the key parameters and elements in coal using terahertz spectroscopy pp. 1140-1145

- Honglei Zhan, Kun Zhao and Lizhi Xiao
- Analysis of design parameters of large-sized wind turbines by non-dimensional model pp. 1146-1154

- Armando Lúcio Ramos de Medeiros, Alex Maurício Araújo, Oyama Douglas Queiroz de Oliveira Filho, Janardan Rohatgi and Maurílio José dos Santos
- The aerodynamics of a camber-bladed vertical axis wind turbine in unsteady wind pp. 1155-1164

- Michael D. Bausas and Louis Angelo M. Danao
- An optimization model for sequential fast pyrolysis facility location-allocation under renewable fuel standard pp. 1165-1172

- Yihua Li, Guiping Hu and Mark Mba Wright
- Energy analysis for guiding the design of well systems of deep Enhanced Geothermal Systems pp. 1173-1188

- Mengying Li and Noam Lior
- Numerical study of turbulent porous media combustion coupled with thermoelectric generation in a recuperative reactor pp. 1189-1198

- P. Donoso-García and L. Henríquez-Vargas
- The impact of energy audits on energy efficiency investment of public owners. Evidence from Italy pp. 1199-1209

- Gian Paolo Barbetta, Paolo Canino and Stefano Cima
- Reliable context-aware multi-attribute continuous authentication framework for secure energy utilization management in smart homes pp. 1210-1221

- Uthpala Subodhani Premarathne
- Energy efficiency and influencing factor analysis in the overall Chinese textile industry pp. 1222-1229

- Lihong Peng, Yiting Zhang, Yejun Wang, Xiaoling Zeng, Najun Peng and Ang Yu
- Evaluating fractures in rocks from geothermal reservoirs using resistivity at different frequencies pp. 1230-1238

- Kewen Li, Baozhi Pan and Roland Horne
- Entropy generation analysis for a reactive couple stress fluid flow through a channel saturated with porous material pp. 1239-1245

- Samuel O. Adesanya, Semiu O. Kareem, John A. Falade and Samson A. Arekete
- Energetic and exergetic performance analyses of a solar energy-based integrated system for multigeneration including thermoelectric generators pp. 1246-1258

- Shahid Islam, Ibrahim Dincer and Bekir Sami Yilbas
| | |
|