Energy

1976 - 2025

Current editor(s): Henrik Lund and Mark J. Kaiser

From Elsevier
Bibliographic data for series maintained by Catherine Liu ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 90, issue P2, 2015

Thermodynamic analysis of biomass gasification for biomethane production pp. 1207-1218

Sheng Wang, Xiaotao Bi and Shudong Wang

Advanced exergy analysis of an aircraft gas turbine engine: Splitting exergy destructions into parts pp. 1219-1228

Yasin Şöhret, Emin Açıkkalp, Arif Hepbasli and T. Hikmet Karakoc

Proton exchange membrane fuel cell for cooperating households: A convenient combined heat and power solution for residential applications pp. 1229-1238

Francesco Cappa, Andrea Luigi Facci and Stefano Ubertini

Modeling and simulation of thermoelectric device working as a heat pump and an electric generator under Mediterranean climate pp. 1239-1250

Moh'd A. Al-Nimr, Bourhan M. Tashtoush and Ahmad A. Jaradat

Experimental investigation on performance and heat release analysis of a pilot ignited direct injection natural gas engine pp. 1251-1260

Menghan Li, Qiang Zhang, Guoxiang Li and Sidong Shao

Effects of low reactivity fuel characteristics and blending ratio on low load RCCI (reactivity controlled compression ignition) performance and emissions in a heavy-duty diesel engine pp. 1261-1271

Jesús Benajes, Santiago Molina, Antonio García and Javier Monsalve-Serrano

An analysis of the energy efficiency of winter rapeseed biomass under different farming technologies. A case study of a large-scale farm in Poland pp. 1272-1279

Wojciech Stefan Budzyński, Krzysztof Józef Jankowski and Marcin Jarocki

Oxygen and hydrogen productivities and repeatable reactivity of 30-mol%-Fe-, Co-, Ni-, Mn-doped CeO2−δ for thermochemical two-step water-splitting cycle pp. 1280-1289

Nobuyuki Gokon, Toshinori Suda and Tatsuya Kodama

Effect of particle shape on suspension stability and thermal conductivities of water-based bohemite alumina nanofluids pp. 1290-1297

Hyun Jin Kim, Seung-Hyun Lee, Ji-Hwan Lee and Seok Pil Jang

Energetic, exergetic and economic assessment of oxygen production from two columns cryogenic air separation unit pp. 1298-1316

Armin Ebrahimi, Mousa Meratizaman, Hamed Akbarpour Reyhani, Omid Pourali and Majid Amidpour

The shape of future electricity demand: Exploring load curves in 2050s Germany and Britain pp. 1317-1333

T. Boßmann and Iain Staffell

Parameter identification of PEMFC model based on hybrid adaptive differential evolution algorithm pp. 1334-1341

Zhe Sun, Ning Wang, Yunrui Bi and Dipti Srinivasan

Diesel or compressed natural gas? A real options evaluation of the U.S. natural gas boom on fuel choice for trucking fleets pp. 1342-1348

Hui Xian, Berna Karali, Gregory Colson and Michael E. Wetzstein

Sensitivity analysis of recovery efficiency in high-temperature aquifer thermal energy storage with single well pp. 1349-1359

Jun-Seo Jeon, Seung-Rae Lee, Lisa Pasquinelli and Ida Lykke Fabricius

A new approach of clustering operational states for power network expansion planning problems dealing with RES (renewable energy source) generation operational variability and uncertainty pp. 1360-1376

Desta Z. Fitiwi, F. de Cuadra, L. Olmos and M. Rivier

Geothermal favourability mapping by advanced geospatial overlay analysis: Tuscany case study (Italy) pp. 1377-1387

M. Procesi, M. Buttinelli and M. Pignone

Quasi-three dimensional dynamic modeling of a proton exchange membrane fuel cell with consideration of two-phase water transport through a gas diffusion layer pp. 1388-1400

Sanggyu Kang

Experimental demonstration of enhanced solar energy utilization in flat PV (photovoltaic) modules cooled by heat spreaders in conjunction with cotton wick structures pp. 1401-1410

M. Chandrasekar and T. Senthilkumar

Energetic and exergetic analysis of a new compact trigeneration system run with liquefied petroleum gas pp. 1411-1419

Nestor Proenza Pérez, Marlene Titosse Sadamitsu, Jose Luz Silveira, Julio Santana Antunes, Celso Eduardo Tuna, Atilio Erazo Valle and Natalia Faria Silva

Gasifier performance and energy analysis for fluidized bed gasification of sugarcane bagasse pp. 1420-1425

Abanti Sahoo and Deo Karan Ram

State of charge estimation of lithium-ion batteries based on an improved parameter identification method pp. 1426-1434

Bizhong Xia, Chaoren Chen, Yong Tian, Mingwang Wang, Wei Sun and Zhihui Xu

Performance assessment of a thin film photovoltaic system under actual Mediterranean climate conditions in the island of Crete pp. 1435-1455

Nikolaos Savvakis and Theocharis Tsoutsos

Study of a low-carbon production strategy in the metallurgical industry in China pp. 1456-1467

Rui Hu and Qun Zhang

Thermal utilization (treatment) of plastic waste pp. 1468-1477

Janusz Wojciech Bujak

The usability and limits of the steady flamelet approach in oxy-fuel combustions pp. 1478-1489

Bernhard Mayr, Rene Prieler, Martin Demuth and Christoph Hochenauer

Sustainable carbon nanofibers/nanotubes composites from cellulose as electrodes for supercapacitors pp. 1490-1496

Volodymyr Kuzmenko, Olga Naboka, Mazharul Haque, Henrik Staaf, Gert Göransson, Paul Gatenholm and Peter Enoksson

Dynamics of energy use, technological innovation, economic growth and trade openness in Malaysia pp. 1497-1507

Kazi Sohag, Rawshan Ara Begum, Sharifah Mastura Syed Abdullah and Mokhtar Jaafar

Robust control of the variable speed wind turbines in the presence of uncertainties: A comparison between H∞ and PID controllers pp. 1508-1521

Hamed Moradi and Gholamreza Vossoughi

Performance and economic analyses of linear and spot Fresnel lens solar collectors used for greenhouse heating in South Korea pp. 1522-1531

M. Imtiaz Hussain, Asma Ali and Gwi Hyun Lee

Renewable energy from pyrolysis using crops and agricultural residuals: An economic and environmental evaluation pp. 1532-1544

Chih-Chun Kung and Ning Zhang

Emissions control via carbon policies and microgrid generation: A bilevel model and Pareto analysis pp. 1545-1555

Felipe Feijoo and Tapas K. Das

Grey relational analysis for comparative assessment of different cathode materials in microbial electrolysis cells pp. 1556-1562

Abudukeremu Kadier, Peyman Abdeshahian, Yibadatihan Simayi, Manal Ismail, Aidil Abdul Hamid and Mohd Sahaid Kalil

Heat capacity ratio and the best type of heat exchanger for geothermal water providing maximum heat transfer pp. 1563-1568

Özden Ağra, Hasan Hüseyin Erdem, Hakan Demir, Ş. Özgür Atayılmaz and İsmail Teke

Exploring the prospects of thermoelectric power generation in conjunction with a water heating system pp. 1569-1574

Amir Y. Faraji, H.J. Goldsmid, C. Dixon and A. Akbarzadeh

Performance evaluation and parametric optimum design of an updated thermionic-thermoelectric generator hybrid system pp. 1575-1583

Yuan Wang, Shanhe Su, Tie Liu, Guozhen Su and Jincan Chen

Supercritical water oxidation for energy production by hydrothermal flame as internal heat source. Experimental results and energetic study pp. 1584-1594

Pablo Cabeza, Joao Paulo Silva Queiroz, Manuel Criado, Cristina Jiménez, Maria Dolores Bermejo, Fidel Mato and Maria Jose Cocero

Dynamic behaviour analysis of a three pressure level heat recovery steam generator during transient operation pp. 1595-1605

Alberto Benato, Anna Stoppato and Alberto Mirandola

Modelling and sizing of NaS (sodium sulfur) battery energy storage system for extending wind power performance in Crete Island pp. 1606-1617

E.M.G. Rodrigues, G.J. Osório, R. Godina, A.W. Bizuayehu, J.M. Lujano-Rojas, J.C.O. Matias and J.P.S. Catalão

Potential of organic Rankine cycle technology in India: Working fluid selection and feasibility study pp. 1618-1625

Jahar Sarkar and Souvik Bhattacharyya

Combustion kinetic study of woody and herbaceous crops by thermal analysis coupled to mass spectrometry pp. 1626-1635

D. López-González, A. Avalos-Ramirez, A. Giroir-Fendler, S. Godbout, M. Fernandez-Lopez, L. Sanchez-Silva and J.L. Valverde

Drop-in analysis of an internal heat exchanger in a vapour compression system using R1234ze(E) and R450A as alternatives for R134a pp. 1636-1644

Adrián Mota-Babiloni, Joaquín Navarro-Esbrí, Ángel Barragán-Cervera, Francisco Molés and Bernardo Peris

Design method of high performance precast external walls for warm climate by multi-objective optimization analysis pp. 1645-1661

Cristina Baglivo and Paolo Maria Congedo

Thermodynamic analysis and optimization of cascaded latent heat storage system for energy efficient utilization pp. 1662-1673

H.J. Xu and C.Y. Zhao

A new method for optimization of Solar Heat Integration and solar fraction targeting in low temperature process industries pp. 1674-1681

Amir Baniassadi, Mahyar Momen and Majid Amidpour

Calculating impacts of energy standards on energy demand in U.S. buildings with uncertainty in an integrated assessment model pp. 1682-1694

Michael J. Scott, Don S. Daly, John E. Hathaway, Carina S. Lansing, Ying Liu, Haewon C. McJeon, Richard H. Moss, Pralit L. Patel, Marty J. Peterson, Jennie S. Rice and Yuyu Zhou

Optimal real time cost-benefit based demand response with intermittent resources pp. 1695-1706

N. Zareen, M.W. Mustafa, U. Sultana, R. Nadia and M.A. Khattak

Desiccant system for water production from humid air using solar energy pp. 1707-1720

G.E. William, M.H. Mohamed and M. Fatouh

Heat recovery from thermal treatment of medical waste pp. 1721-1732

Janusz Wojciech Bujak

Prediction of monthly average global solar radiation based on statistical distribution of clearness index pp. 1733-1742

T.R. Ayodele and A.S.O. Ogunjuyigbe

Investigation on the off-design performances of flue gas pre-dried lignite-fired power system integrated with waste heat recovery at variable external working conditions pp. 1743-1758

Xiaoqu Han, Ming Liu, Mengxu Zhai, Daotong Chong, Junjie Yan and Feng Xiao

Mathematical modelling and experimental validation of an anode-supported tubular solid oxide fuel cell for heat and power generation pp. 1759-1768

S. Tonekabonimoghadam, R.K. Akikur, M.A. Hussain, S. Hajimolana, R. Saidur, H.W. Ping, M.H. Chakrabarti, N.P. Brandon, P.V. Aravind, J.N.S. Nayagar and M.A. Hashim

Conical nano-structure arrays of Platinum cathode catalyst for enhanced cell performance in PEMFC (proton exchange membrane fuel cell) pp. 1769-1774

Aziz Khan, Bhabesh Kumar Nath and Joyanti Chutia

Multi-level optimization of building design, energy system sizing and operation pp. 1775-1789

Ralph Evins

Switching strategy between HP (high pressure)- and LPEGR (low pressure exhaust gas recirculation) systems for reduced fuel consumption and emissions pp. 1790-1798

José Manuel Luján, Carlos Guardiola, Benjamín Pla and Alberto Reig

Representing power sector variability and the integration of variable renewables in long-term energy-economy models using residual load duration curves pp. 1799-1814

Falko Ueckerdt, Robert Brecha, Gunnar Luderer, Patrick Sullivan, Eva Schmid, Nico Bauer, Diana Böttger and Robert Pietzcker

Optimization of performance and exhaust emission parameters of a SI (spark ignition) engine with gasoline–ethanol blended fuels using response surface methodology pp. 1815-1829

Gholamhassan Najafi, Barat Ghobadian, Talal Yusaf, Seyed Mohammad Safieddin Ardebili and Rizalman Mamat

Feasibility study of using a biogas engine as backup in a decentralized hybrid (PV/wind/battery) power generation system – Case study Kenya pp. 1830-1841

Sara Ghaem Sigarchian, Rita Paleta, Anders Malmquist and André Pina

Conceptual design and simulation investigation of an electronic cooling device powered by hot electrons pp. 1842-1847

Guozhen Su, Yanchao Zhang, Ling Cai, Shanhe Su and Jincan Chen

Energy and exergy based thermodynamic analysis of reheat and regenerative Braysson cycle pp. 1848-1858

R. Chandramouli, M.S.S. Srinivasa Rao and K. Ramji

Transient thermal model of passenger car's cabin and implementation to saturation cycle with alternative working fluids pp. 1859-1868

Hoseong Lee, Yunho Hwang, Ilguk Song and Kilsang Jang

Process simulation of multi-stage chemical-looping combustion using Aspen Plus pp. 1869-1877

William X. Meng, Subhodeep Banerjee, Xiao Zhang and Ramesh K. Agarwal

Experimental analysis of the spectral factor for quantifying the spectral influence on concentrator photovoltaic systems under real operating conditions pp. 1878-1886

Eduardo F. Fernández, Florencia Almonacid, Alberto Soria-Moya and Julio Terrados

Flexible security-constrained scheduling of wind power enabling time of use pricing scheme pp. 1887-1900

E. Heydarian-Forushani, M.E.H. Golshan and M. Shafie-khah

An MILP (mixed integer linear programming) model for optimal design of district-scale distributed energy resource systems pp. 1901-1915

Yun Yang, Shijie Zhang and Yunhan Xiao

Exergy based efficiency indicators for the silicon furnace pp. 1916-1921

M.T. Børset, L. Kolbeinsen, H. Tveit and S. Kjelstrup

Production of gasoline fraction from bio-oil under atmospheric conditions by an integrated catalytic transformation process pp. 1922-1930

Zhaoxia Zhang, Peiyan Bi, Peiwen Jiang, Minghui Fan, Shumei Deng, Qi Zhai and Quanxin Li

Analytic modeling and large-scale experimental study of mass and heat transfer during hydrate dissociation in sediment with different dissociation methods pp. 1931-1948

Yi Wang, Jing-Chun Feng, Xiao-Sen Li, Yu Zhang and Gang Li

Dynamic performance of a high-temperature PEM fuel cell – An experimental study pp. 1949-1955

Caizhi Zhang, Zhitao Liu, Weijiang Zhou, Siew Hwa Chan and Youyi Wang

CO2-emissions from Norwegian oil and gas extraction pp. 1956-1966

Ekaterina Gavenas, Knut Einar Rosendahl and Terje Skjerpen

DEA (data envelopment analysis)-assisted supporting measures for ground coupled heat pumps implementing in Italy: A case study pp. 1967-1972

L. Longo, A. Colantoni, S. Castellucci, M. Carlini, L. Vecchione, E. Savuto, V. Pallozzi, A. Di Carlo, E. Bocci, M. Moneti, S. Cocchi and K. Boubaker

Hydrogen generation from catalytic hydrolysis of sodium borohydride using bimetallic Ni–Co nanoparticles on reduced graphene oxide as catalysts pp. 1973-1982

Chang-Chen Chou, Ching-Hsuan Hsieh and Bing-Hung Chen

Residual lifetime prediction for lithium-ion battery based on functional principal component analysis and Bayesian approach pp. 1983-1993

Yujie Cheng, Chen Lu, Tieying Li and Laifa Tao

Reducing water usage with rotary regenerative gas/gas heat exchangers in natural gas-fired power plants with post-combustion carbon capture pp. 1994-2005

Laura Herraiz, Dougal Hogg, Jim Cooper, Jon Gibbins and Mathieu Lucquiaud

Methane enrichment of syngas (H2/CO) in a spark-ignition direct-injection engine: Combustion, performance and emissions comparison with syngas and Compressed Natural Gas pp. 2006-2015

Ftwi Yohaness Hagos, A. Rashid A. Aziz and Shaharin A. Sulaiman

Profiling technological failure and disaster in the energy sector: A comparative analysis of historical energy accidents pp. 2016-2027

Benjamin K. Sovacool, Matthew Kryman and Emily Laine

Energy and exergy analysis of integrated system of ammonia–water Kalina–Rankine cycle pp. 2028-2037

Yaping Chen, Zhanwei Guo, Jiafeng Wu, Zhi Zhang and Junye Hua

Effect of LiCl content on pore structure of catalyst layer and cell performance in high temperature polymer electrolyte membrane fuel cell pp. 2038-2046

H.N. Yang and W.J. Kim

Optimum design and exergy analysis of a novel cryogenic air separation process with LNG (liquefied natural gas) cold energy utilization pp. 2047-2069

Mehdi Mehrpooya, Mohammad Mehdi Moftakhari Sharifzadeh and Marc A. Rosen

Performance characterization and modelling of syngas-fed SOFCs (solid oxide fuel cells) varying fuel composition pp. 2070-2084

Arianna Baldinelli, Linda Barelli and Gianni Bidini

Optimization of multiple receivers solar power tower systems pp. 2085-2093

E. Carrizosa, C. Domínguez-Bravo, E. Fernández-Cara and M. Quero

Volume 90, issue P1, 2015

A hierarchical approach for evaluating and selecting waste heat utilization opportunities pp. 5-23

Gbemi Oluleye, Megan Jobson and Robin Smith

Prediction, parametric analysis and bi-objective optimization of waste heat utilization in sinter cooling bed using evolutionary algorithm pp. 24-35

Yan Liu, Jian Yang, Jing-yu Wang, Xu-gang Ding, Zhi-long Cheng and Qiu-wang Wang

A new pinch based method for simultaneous selection of working fluid and operating conditions in an ORC (Organic Rankine Cycle) recovering waste heat pp. 36-46

Haoshui Yu, Xiao Feng and Yufei Wang

Low potential heat utilization of bromine plant via integration on process and Total Site levels pp. 47-55

Stanislav Boldyryev and Petar Sabev Varbanov

A systematic framework for multi-plants Heat Integration combining Direct and Indirect Heat Integration methods pp. 56-67

Yufei Wang, Chenglin Chang and Xiao Feng

Systematic approach for targeting interplant hydrogen networks pp. 68-88

Chun Deng, Yuhang Zhou, Cheng-Liang Chen and Xiao Feng

Area-wide energy saving program in a large industrial area pp. 89-94

Kazuo Matsuda, Yoshiichi Hirochi, Daisuke Kurosaki and Yosuke Kado

Thermo-economic optimisation of industrial milk spray dryer exhaust to inlet air heat recovery pp. 95-104

Timothy G. Walmsley, Michael R.W. Walmsley, Martin J. Atkins, James R. Neale and Amir H. Tarighaleslami

Searches of cost effective ways for amine absorption unit design in CO2 post-combustion capture process pp. 105-112

Olexander Yu. Perevertaylenko, Andriy O. Gariev, Theodoros Damartzis, Leonid L. Tovazhnyanskyy, Petro O. Kapustenko and Olga P. Arsenyeva

Integration options for solar thermal with low temperature industrial heat recovery loops pp. 113-121

Timothy G. Walmsley, Michael R.W. Walmsley, Amir H. Tarighaleslami, Martin J. Atkins and James R. Neale

Process intensification for dimethyl ether production by self-heat recuperation pp. 122-127

Yasuki Kansha, Masanori Ishizuka, Chunfeng Song and Atsushi Tsutsumi

Peak-off-peak load shifting for hybrid power systems based on Power Pinch Analysis pp. 128-136

Nor Erniza Mohammad Rozali, Sharifah Rafidah Wan Alwi, Zainuddin Abdul Manan and Jiří Jaromír Klemeš

Combined heat and power production planning in a waste-to-energy plant on a short-term basis pp. 137-147

Michal Touš, Martin Pavlas, Ondřej Putna, Petr Stehlík and Lukáš Crha

The influence of biomass supply chains and by-products on the greenhouse gas emissions from gasification-based bio-SNG production systems pp. 148-162

Kristina M. Holmgren, Thore S. Berntsson, Eva Andersson and Tomas Rydberg

From heat integration targets toward implementation – A TSA (total site analysis)-based design approach for heat recovery systems in industrial clusters pp. 163-172

Roman Hackl and Simon Harvey

Strategic energy planning for large-scale energy systems: A modelling framework to aid decision-making pp. 173-186

Victor Codina Gironès, Stefano Moret, François Maréchal and Daniel Favrat

Liquid air fueled open-closed cycle Stirling engine and its exergy analysis pp. 187-201

Jia Wang, Weiqing Xu, Shuiting Ding, Yan Shi, Maolin Cai and Ali Rehman

Mathematical models of the heat-water dissociation of natural gas hydrates considering a moving Stefan boundary pp. 202-207

Mingchuan Li, Shuanshi Fan, Yuliang Su, Justin Ezekiel, Mingjing Lu and Liang Zhang

Green methanol from hydrogen and carbon dioxide using geothermal energy and/or hydropower in Iceland or excess renewable electricity in Germany pp. 208-217

Marco Kauw, René M.J. Benders and Cindy Visser

Waste heat recovery using a novel high performance low pressure turbine for electric turbocompounding in downsized gasoline engines: Experimental and computational analysis pp. 218-234

A.M.I. Bin Mamat, R.F. Martinez-Botas, S. Rajoo, A. Romagnoli and S. Petrovic

On the optimal mix of wind and solar generation in the future Chinese power system pp. 235-243

Matthias Huber and Christoph Weissbart

Design and analysis of the natural gas liquefaction optimization process- CCC-ES (energy storage of cryogenic carbon capture) pp. 244-257

Farhad Fazlollahi, Alex Bown, Edris Ebrahimzadeh and Larry L. Baxter

Fuzzy terminal sliding mode control for extracting maximum marine current energy pp. 258-265

Ya-jing Gu, Xiu-xing Yin, Hong-wei Liu, Wei Li and Yong-gang Lin

Comparison of carbonyl compound emissions from a diesel engine generator fueled with blends of n-butanol, biodiesel and diesel pp. 266-273

Po-Ming Yang, Yuan-Chung Lin, Kuang C. Lin, Syu-Ruei Jhang, Shang-Cyuan Chen, Chia-Chi Wang and Ying-Chi Lin

Multi-expert wind energy technology selection using interval-valued intuitionistic fuzzy sets pp. 274-285

Sezi Cevik Onar, Basar Oztaysi, İrem Otay and Cengiz Kahraman

Different interpretations of the cost-effectiveness of renewable electricity support: Some analytical results pp. 286-298

Emilio Cerdá and Pablo del Río

Effect of carbon dioxide on the contamination of low temperature and high temperature PEM (polymer electrolyte membrane) fuel cells. Influence of temperature, relative humidity and analysis of regeneration processes pp. 299-309

Manuel Antonio Díaz, Alfredo Iranzo, Felipe Rosa, Fernando Isorna, Eduardo López and Juan Pedro Bolivar

Numerical optimization of Combined Heat and Power Organic Rankine Cycles – Part A: Design optimization pp. 310-328

Emanuele Martelli, Federico Capra and Stefano Consonni

Numerical optimization of combined heat and power Organic Rankine Cycles – Part B: Simultaneous design & part-load optimization pp. 329-343

Federico Capra and Emanuele Martelli

High-performance solid oxide electrolysis cell based on ScSZ/GDC (scandia-stabilized zirconia/gadolinium-doped ceria) bi-layered electrolyte and LSCF (lanthanum strontium cobalt ferrite) oxygen electrode pp. 344-350

Asif Mahmood, Saira Bano, Ji Haeng Yu and Kew-Ho Lee

Using in-home displays to provide smart meter feedback about household electricity consumption: A randomized control trial comparing kilowatts, cost, and social norms pp. 351-358

P. Wesley Schultz, Mica Estrada, Joseph Schmitt, Rebecca Sokoloski and Nilmini Silva-Send

Experimental investigation on thermophysical properties of capric acid–lauric acid phase change slurries for thermal storage system pp. 359-368

Zhaoli Zhang, Yanping Yuan, Nan Zhang and Xiaoling Cao

Improved thermohydraulic numerical model of a heat exchanger for air-to-refrigerant systems pp. 369-376

Euiguk Jung, Byoungha Ahn, DeukGwan Choi and Joonhong Boo

The use of a sky camera for solar radiation estimation based on digital image processing pp. 377-386

J. Alonso-Montesinos and F.J. Batlles

Characteristics of distinct ash flows in a biomass thermal power plant with bubbling fluidised bed combustor pp. 387-402

L.A.C. Tarelho, E.R. Teixeira, D.F.R. Silva, R.C.E. Modolo, J.A. Labrincha and F. Rocha

Optical qualification of a solar parabolic concentrator using photogrammetry technique pp. 403-416

Safa Skouri, Abdessalem Ben Haj Ali, Salwa Bouadila and Sassi Ben Nasrallah

Energy efficiency and CO2 mitigation potential of the Turkish iron and steel industry using the LEAP (long-range energy alternatives planning) system pp. 417-428

Seyithan A. Ates

Efficiency of wind power production and its determinants pp. 429-438

Simone Pieralli, Matthias Ritter and Martin Odening

Aerodynamic characteristics of two-bladed H-Darrieus at various solidities and rotating speeds pp. 439-451

Sungjun Joo, Heungsoap Choi and Juhee Lee

Invariant properties of solid oxide fuel cell systems with integrated reformers pp. 452-463

Andrew Slippey, Omid Madani, Kalyan Nishtala and Tuhin Das

CoB supported on Ag-activated TiO2 as a highly active catalyst for hydrolysis of alkaline NaBH4 solution pp. 464-474

Xiaochen Shen, Qing Wang, Qingquan Wu, Siqi Guo, Zhengyan Zhang, Ziyang Sun, Baishu Liu, Zhibin Wang, Bin Zhao and Weiping Ding

Using the multiple regression analysis with respect to ANOVA and 3D mapping to model the actual performance of PEM (proton exchange membrane) fuel cell at various operating conditions pp. 475-482

Farqad Al-Hadeethi, Moh'd Al-Nimr and Mohammad Al-Safadi

What does benchmarking of wheat farmers practicing conservation tillage in the eastern Indo-Gangetic Plains tell us about energy use efficiency? An application of slack-based data envelopment analysis pp. 483-493

Sreejith Aravindakshan, Frederick J. Rossi and Timothy J. Krupnik

Energy security, policy and technology in South East Europe: Presenting and applying an energy security index to Croatia pp. 494-507

Vladimir Franki and Alfredo Višković

Effect of fill volume on solidification characteristics of DI (deionized) water in a spherical capsule – An experimental study pp. 508-515

P. Chandrasekaran, M. Cheralathan and R. Velraj

Modified intake and exhaust system for piston-type compressed air engines pp. 516-524

Chi-Min Liu, Jhih-Jie You, Cheng-Kuo Sung and Chih-Yung Huang

Investigation of parameters affecting exergy and emission performance of basic and intercooled gas turbine cycles pp. 525-536

Anupam Kumari and Sanjay,

Off-design dynamic model of a real Organic Rankine Cycle system fuelled by exhaust gases from industrial processes pp. 537-551

N. Mazzi, S. Rech and A. Lazzaretto

Thermodynamic performance analysis and optimization of DMC (Dual Miller Cycle) cogeneration system by considering exergetic performance coefficient and total exergy output criteria pp. 552-559

Yasin Ust, Feyyaz Arslan, Ibrahim Ozsari and Mehmet Cakir

Feasibility of energy reduction targets under climate change: The case of the residential heating energy sector of the Netherlands pp. 560-569

Mady Olonscheck, Carsten Walther, Matthias Lüdeke and Jürgen P. Kropp

Understanding the rapid growth of China's energy consumption: A comprehensive decomposition framework pp. 570-577

Kerui Du and Boqiang Lin

New quasi-3D model for heat transfer in U-shaped GHEs (ground heat exchangers): Effective overall thermal resistance pp. 578-587

WeiWu Ma, Min Li, Ping Li and Alvin C.K. Lai

Fabrication and experimental validation of a full-scale depleted uranium bed with thin double-layered annulus configuration for hydrogen isotopes recovery and delivery pp. 588-594

Huaqin Kou, Wenhua Luo, Zhiyong Huang, Ge Sang, Daqiao Meng, Guanghui Zhang, Changan Chen, Deli Luo and Changwen Hu

Improved Poly(vinyl alcohol) (PVA) based matrix as a potential solid electrolyte for electrochemical energy conversion devices, obtained by gamma irradiation pp. 595-604

Ivan Stoševski, Jelena Krstić, Nikola Vokić, Miljan Radosavljević, Zorica Kačarević Popović and Šćepan Miljanić

Control of anode supported SOFCs (solid oxide fuel cells): Part I. mathematical modeling and state estimation within one cell pp. 605-621

Hamid Reza Amedi, Bahamin Bazooyar and Mahmoud Reza Pishvaie

Reducing ash related operation problems of fast growing timber species and oil palm biomass for combustion applications using leaching techniques pp. 622-630

K.L. Chin, P.S. H'ng, M.T. Paridah, K. Szymona, M. Maminski, S.H. Lee, W.C. Lum, M.Y. Nurliyana, M.J. Chow and W.Z. Go

Performance study of a twin-screw expander used in a geothermal organic Rankine cycle power generator pp. 631-642

Hao Tang, Huagen Wu, Xiaolin Wang and Ziwen Xing

Experiment and cycle analysis on a partially admitted axial-type turbine used in the organic Rankine cycle pp. 643-651

Soo-Yong Cho, Chong-Hyun Cho and Sang-Kyu Choi

Experimental and numerical investigations on enclosure pressure effects on radiation and convection heat losses from two finite concentric cylinders using two radiation shields pp. 652-662

Seyfolah Saedodin and Mohammad Sadegh Motaghedi Barforoush

Technology application of district heating system with Co-generation based on absorption heat exchange pp. 663-670

Yan Li, Lin Fu and Shuyan Zhang

Statistical parameters as a means to a priori assess the accuracy of solar forecasting models pp. 671-679

Cyril Voyant, Ted Soubdhan, Philippe Lauret, Mathieu David and Marc Muselli

Comparative analysis of turbulence models for the aerodynamic simulation of H-Darrieus rotors pp. 680-690

László Daróczy, Gábor Janiga, Klaus Petrasch, Michael Webner and Dominique Thévenin

How to select air pressures in the tires of MFWD (mechanical front-wheel drive) tractor to minimize fuel consumption for the case of reasonable wheel slip pp. 691-700

Algirdas Janulevičius and Vidas Damanauskas

Thermal transport in nano-porous insulation of aerogel: Factors, models and outlook pp. 701-721

G.H. Tang, C. Bi, Y. Zhao and W.Q. Tao

Hydrodynamics characteristics of hydrogen evolution process through electrolysis: Numerical and experimental studies pp. 722-737

W.A. El-Askary, I.M. Sakr, K.A. Ibrahim and A. Balabel

Accelerating the energy retrofit of commercial buildings using a database of energy efficiency performance pp. 738-747

Sang Hoon Lee, Tianzhen Hong, Mary Ann Piette, Geof Sawaya, Yixing Chen and Sarah C. Taylor-Lange

Development of catalysts for hydrogen production through the integration of steam reforming of methane and high temperature water gas shift pp. 748-758

Trevor L. LeValley, Anthony R. Richard and Maohong Fan

Improved modelling of thermal energy savings potential in the existing residential stock using a newly available data source pp. 759-767

D. Dineen, F. Rogan and B.P. Ó Gallachóir

Design and experimental analysis of a mini ORC (organic Rankine cycle) power plant based on R245fa working fluid pp. 768-775

E. Galloni, G. Fontana and S. Staccone

Retrieval of surface solar irradiance, based on satellite-derived cloud information, in Greece pp. 776-783

E. Nikitidou, A. Kazantzidis, P. Tzoumanikas, V. Salamalikis and A.F. Bais

Effect of number of blades on aerodynamic forces on a straight-bladed Vertical Axis Wind Turbine pp. 784-795

Qing'an Li, Takao Maeda, Yasunari Kamada, Junsuke Murata, Kazuma Furukawa and Masayuki Yamamoto

Piezoelectric energy harvesting from raindrop impacts pp. 796-806

Mohammad Adnan Ilyas and Jonathan Swingler

Influence of the size of spherical capsule on solidification characteristics of DI (deionized water) water for a cool thermal energy storage system – An experimental study pp. 807-813

P. Chandrasekaran, M. Cheralathan and R. Velraj

Effects of diesel injection strategy on natural gas/diesel reactivity controlled compression ignition combustion pp. 814-826

Amin Paykani, Amir-Hasan Kakaee, Pourya Rahnama and Rolf D. Reitz

Operation of renewable-dominated power systems with a significant penetration of plug-in electric vehicles pp. 827-835

Miguel Carrión and Rafael Zárate-Miñano

Three dimensional experimental and numerical investigations into hydrate dissociation in sandy reservoir with dual horizontal wells pp. 836-845

Jing-Chun Feng, Yi Wang, Xiao-Sen Li, Gang Li and Yu Zhang

Multi-junction solar cells electrical characterization by neuronal networks under different irradiance, spectrum and cell temperature pp. 846-856

Eduardo F. Fernández, Florencia Almonacid and Antonio J. Garcia-Loureiro

Hydrogen-rich gas production by the gasification of wet MSW (municipal solid waste) coupled with carbon dioxide capture pp. 857-863

Mian Hu, Dabin Guo, Caifeng Ma, Zhiquan Hu, Beiping Zhang, Bo Xiao, Siyi Luo and Jingbo Wang

Operation of an organic Rankine cycle dependent on pumping flow rates and expander torques pp. 864-878

Xufei Yang, Jinliang Xu, Zheng Miao, Jinghuang Zou and Chao Yu

A method for state of energy estimation of lithium-ion batteries based on neural network model pp. 879-888

Guangzhong Dong, Xu Zhang, Chenbin Zhang and Zonghai Chen

Understanding the self-sustained oscillating two-phase flow motion in a closed loop pulsating heat pipe pp. 889-899

Giulia Spinato, Navid Borhani and John R. Thome

The wasted energy: A metric to set up appropriate targets in our path towards fully renewable energy systems pp. 900-909

Juan José Vinagre Díaz, Mark Richard Wilby and Ana Belén Rodríguez González

Utilization of oil wells for electricity generation: Performance and economics pp. 910-916

Mohamad Kharseh, Mohammed Al-Khawaja and Ferri Hassani

Numerical simulation and wind tunnel experiments on wind-induced natural ventilation in isolated building with patio pp. 917-925

Slah Driss, Zied Driss and Imen Kallel Kammoun

Cold-season solar input and ambivalent thermal behavior brought by climber greenwalls pp. 926-938

C.Y. Jim

Optimal economic thickness of various insulation materials for different orientations of external walls considering the wind characteristics pp. 939-952

Ioannis Axaopoulos, Petros Axaopoulos, Gregoris Panayiotou, Soteris Kalogirou and John Gelegenis

Evaluating clean energy alternatives for Jiangsu, China: An improved multi-criteria decision making method pp. 953-964

Ling Zhang, Peng Zhou, Sidney Newton, Jian-xin Fang, De-qun Zhou and Lu-ping Zhang

Shelter and residential building energy consumption within the 450 ppm CO2eq constraints in different climate zones pp. 965-979

Lizhen Huang, Rolf André Bohne and Jardar Lohne

Estimating the energy density of direct borohydride–hydrogen peroxide fuel cell systems for air-independent propulsion applications pp. 980-986

Taek Hyun Oh, Bosun Jang and Sejin Kwon

Thermodynamic analysis of a milk pasteurization process assisted by geothermal energy pp. 987-996

Nurdan Yildirim and Seda Genc

Impact of micromixing on performance of a membrane-based absorber pp. 997-1004

Rasool Nasr Isfahani, Sajjad Bigham, Mehdi Mortazavi, Xing Wei and Saeed Moghaddam

Understanding and predicting the impact of location and load on microgrid design pp. 1005-1023

Michael Zachar and Prodromos Daoutidis

Performance evaluation of various cryogenic energy storage systems pp. 1024-1032

Rodrigo F. Abdo, Hugo T.C. Pedro, Ricardo N.N. Koury, Luiz Machado, Carlos F.M. Coimbra and Matheus P. Porto

Optimisation of the performance of a novel rotationally asymmetrical optical concentrator design for building integrated photovoltaic system pp. 1033-1045

Siti Hawa Abu-Bakar, Firdaus Muhammad-Sukki, Daria Freier, Roberto Ramirez-Iniguez, Tapas Kumar Mallick, Abu Bakar Munir, Siti Hajar Mohd Yasin, Abdullahi Abubakar Mas'ud and Norhidayah Md Yunus

Thermodynamic analysis on optimum performance of scramjet engine at high Mach numbers pp. 1046-1054

Duo Zhang, Shengbo Yang, Silong Zhang, Jiang Qin and Wen Bao

Experimental and Fluid Structure Interaction analysis of a morphing wind turbine rotor pp. 1055-1065

David W. MacPhee and Asfaw Beyene

Thermogravimetric analyses of co-combustion of plastic, rubber, leather in N2/O2 and CO2/O2 atmospheres pp. 1066-1074

YuTing Tang, XiaoQian Ma, ZhiYi Lai and Yunxiang Fan

MOF-derived Cu/nanoporous carbon composite and its application for electro-catalysis of hydrogen evolution reaction pp. 1075-1081

Jahan-Bakhsh Raoof, Sayed Reza Hosseini, Reza Ojani and Sakineh Mandegarzad

The technical potential for wind energy in Illinois pp. 1082-1090

M.R. Aldeman, J.H. Jo and D.G. Loomis

Direct torque control of machine side multilevel converter for variable speed wind turbines pp. 1091-1099

Ahmed M. Atallah and El Sayed F. El Tantawy

Utilization of electric vehicles and renewable energy sources used as distributed generators for improving characteristics of electric power distribution systems pp. 1100-1110

Hassan Fathabadi

Multi-objective optimization of wind turbine blades using lifting surface method pp. 1111-1121

Xin Shen, Jin-Ge Chen, Xiao-Cheng Zhu, Peng-Yin Liu and Zhao-Hui Du

Direct growth of 3D flower-like Pt nanostructures by a template-free electrochemical route as an efficient electrocatalyst for methanol oxidation reaction pp. 1122-1131

Reza Ojani, Ehteram Hasheminejad and Jahan Bakhsh Raoof

CO2 based power cycle with multi-stage compression and intercooling for low temperature waste heat recovery pp. 1132-1143

Subha Mondal and Sudipta De

Fabrication and characterization of alkaline leached CuZn/Cu electrode as anode material for direct methanol fuel cell pp. 1144-1151

Ali Döner, Ramazan Solmaz and Gülfeza Kardaş

Effects of natural gas compositions on CNG (compressed natural gas) reciprocating compressors performance pp. 1152-1162

Mahmood Farzaneh-Gord, Amir Niazmand, Mahdi Deymi-Dashtebayaz and Hamid Reza Rahbari

Sodium borohydride hydrogen generator using Co–P/Ni foam catalysts for 200 W proton exchange membrane fuel cell system pp. 1163-1170

Taek Hyun Oh, Byeong Gyu Gang, Hyuntak Kim and Sejin Kwon

Energy efficiency evaluation of a hybrid energy system for building applications in a Mediterranean climate and its feasibility aspect pp. 1171-1179

S. Nižetić, N. Duić, A.M. Papadopulos, G.M. Tina and F. Grubišić-Čabo

Hydromethane generation through SOE (solid oxide electrolyser): Advantages of H2O–CO2 co-electrolysis pp. 1180-1191

L. Barelli, G. Bidini and A. Ottaviano

Catalytic combustion of the retentate gas from a CO2/H2 separation membrane reactor for further CO2 enrichment and energy recovery pp. 1192-1198

Kyung-Ran Hwang, Jin-Woo Park, Sung-Wook Lee, Sungkook Hong, Chun-Boo Lee, Duck-Kyu Oh, Min-Ho Jin, Dong-Wook Lee and Jong-Soo Park

Sequential bioethanol and biogas production from sugarcane bagasse based on high solids fed-batch SSF pp. 1199-1205

Yunyun Liu, Jingliang Xu, Yu Zhang, Zhenhong Yuan, Minchao He, Cuiyi Liang, Xinshu Zhuang and Jun Xie