Energy

1976 - 2025

Current editor(s): Henrik Lund and Mark J. Kaiser

From Elsevier
Bibliographic data for series maintained by Catherine Liu ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 92, issue P3, 2015

Higher renewable energy integration into the existing energy system of Finland – Is there any maximum limit? pp. 244-259

Behnam Zakeri, Sanna Syri and Samuli Rinne

Achieving 33% renewable electricity generation by 2020 in California pp. 260-269

Michael R.W. Walmsley, Timothy G. Walmsley and Martin J. Atkins

Integration of renewables and reverse osmosis desalination – Case study for the Jordanian energy system with a high share of wind and photovoltaics pp. 270-278

T. Novosel, B. Ćosić, T. Pukšec, G. Krajačić, N. Duić, B.V. Mathiesen, H. Lund and M. Mustafa

Thermo-ecological assessment of CCHP (combined cold-heat-and-power) plant supported with renewable energy pp. 279-289

Wojciech Stanek, Wiesław Gazda and Wojciech Kostowski

Exergetic and exergoeconomic analysis of a renewable polygeneration system and viability study for small isolated communities pp. 290-307

F. Calise, M. Dentice d'Accadia and A. Piacentino

Thermoecological cost of electricity, heat and cold generated in a trigeneration module fuelled with selected fossil and renewable fuels pp. 308-319

Sergio Usón, Wojciech J. Kostowski, Wojciech Stanek and Wiesław Gazda

Performance evaluation of porous sodium aluminate sorbent for halide removal process in oxy-fuel IGCC power generation plant pp. 320-327

Makoto Kobayashi, Hiroyuki Akiho and Yoshinobu Nakao

Life cycle assessment of an integrated oxy-fuel combustion power plant with CO2 capture, transport and storage ‒ Poland case study pp. 328-340

Paweł Gładysz and Andrzej Ziębik

Thermo-ecological cost of hard coal with inclusion of the whole life cycle chain pp. 341-348

Wojciech Stanek, Lucyna Czarnowska, Krzysztof Pikoń and Magdalena Bogacka

Product based evaluation of pyrolysis of food waste and its digestate pp. 349-354

Suraj Adebayo Opatokun, Vladimir Strezov and Tao Kan

An experimental study on premixed laminar and turbulent combustion of synthesized coalbed methane pp. 355-364

Shizhuo Zheng, Xin Zhang, Tao Wang and Jie Liu

Evaluation of thermochemical properties of raw and extracted microalgae pp. 365-372

A.F. Ferreira, A.P. Soares Dias, C.M. Silva and M. Costa

A methodology for the synthesis of heat exchanger networks having large numbers of uncertain parameters pp. 373-382

Zorka Novak Pintarič and Zdravko Kravanja

Comparison of building energy demand for hotels, hospitals, and offices in Korea pp. 383-393

Mo Chung and Hwa-Choon Park

Improvement of energy efficiency and quality of street lighting in South Italy as an action of Sustainable Energy Action Plans. The case study of Comiso (RG) pp. 394-408

Marco Beccali, Marina Bonomolo, Giuseppina Ciulla, Alessandra Galatioto and Valerio Lo Brano

Building life cycle optimization tools for early design phases pp. 409-419

Iva Kovacic and Veronika Zoller

Greenhouse gases emission assessment in residential sector through buildings simulations and operation optimization pp. 420-434

Mirko M. Stojiljković, Marko G. Ignjatović and Goran D. Vučković

Comparative analysis of the district heating systems of two towns in Croatia and Denmark pp. 435-443

Dario Čulig-Tokić, Goran Krajačić, Borna Doračić, Brian Vad Mathiesen, Robert Krklec and Jesper Møller Larsen

A novel model of electric vehicle fleet aggregate battery for energy planning studies pp. 444-455

Branimir Škugor and Joško Deur

Dynamic programming-based optimisation of charging an electric vehicle fleet system represented by an aggregate battery model pp. 456-465

Branimir Škugor and Joško Deur

Agent based modelling and energy planning – Utilization of MATSim for transport energy demand modelling pp. 466-475

T. Novosel, L. Perković, M. Ban, H. Keko, T. Pukšec, G. Krajačić and N. Duić

Demand response capacity estimation in various supply areas pp. 476-486

Vladimir M. Shiljkut and Nikola Lj. Rajakovic

Adaptive control for evaluation of flexibility benefits in microgrid systems pp. 487-504

Ninoslav Holjevac, Tomislav Capuder and Igor Kuzle

Peak load shifting with energy storage and price-based control system pp. 505-514

Reza Barzin, John J.J. Chen, Brent R. Young and Mohammed M. Farid

Exergy transition planning for net-zero districts pp. 515-531

Şiir Kılkış

The German Energiewende – History and status quo pp. 532-546

Jürgen-Friedrich Hake, Wolfgang Fischer, Sandra Venghaus and Christoph Weckenbrock

Determinants of energy intensity in the European Union: A panel data analysis pp. 547-555

Sanja Filipović, Miroslav Verbič and Mirjana Radovanović

Metrics for sustainability analysis of post-combustion abatement of CO2 emissions: Microalgae mediated routes and CCS (carbon capture and storage) pp. 556-568

Ofélia de Queiroz Fernandes Araújo, José Luiz de Medeiros, Lídia Yokoyama and Cláudia do Rosário Vaz Morgado

Carbon Emissions Pinch Analysis for emissions reductions in the New Zealand transport sector through to 2050 pp. 569-576

Michael R.W. Walmsley, Timothy G. Walmsley, Martin J. Atkins, Peter J.J. Kamp, James R. Neale and Alvin Chand

Lessons learnt from a sectoral analysis of greenhouse gas mitigation potential in the Balkans pp. 577-591

E. Georgopoulou, S. Mirasgedis, Y. Sarafidis, N. Gakis, V. Hontou, D.P. Lalas, D. Steiner, Andreas Tuerk, C. Fruhmann and J. Pucker

Investigating long-term energy and CO2 mitigation options at city scale: A technical analysis for the city of Bologna pp. 592-611

Edi Assoumou, Jean-Paul Marmorat and Valérie Roy

Energy and sustainable development in cities: A case study of Bogotá pp. 612-621

Clara Pardo Martinez

Composite index for benchmarking local energy systems of Mediterranean port cities pp. 622-638

Şiir Kılkış

Integrated analysis of energy and water supply in islands. Case study of S. Vicente, Cape Verde pp. 639-648

R. Segurado, M. Costa, N. Duić and M.G. Carvalho

Volume 92, issue P2, 2015

The impact of the long-term EU target for renewables on the structure of electricity production in Poland pp. 172-178

Lidia Gawlik, Adam Szurlej and Artur Wyrwa

Thermodynamic evaluation of CHP (combined heat and power) plants integrated with installations of coal gasification pp. 179-188

Andrzej Ziębik, Tomasz Malik and Marcin Liszka

Thermodynamic and economic comparative analysis of air and steam bottoming cycle pp. 189-196

T. Chmielniak, D. Czaja, S. Lepszy and K. Stępczyńska-Drygas

The characteristics of ultramodern combined cycle power plants pp. 197-211

Janusz Kotowicz, Marcin Job and Mateusz Brzęczek

The impact of the CO2 separation system integration with a 900 MWe power unit on its thermodynamic and economic indices pp. 212-220

Henryk Łukowicz and Marcin Mroncz

Modelling and experimental investigation of an adsorption chiller using low-temperature heat from cogeneration pp. 221-229

Maciej Chorowski and Piotr Pyrka

Optimizing of the underground power cable bedding using momentum-type particle swarm optimization method pp. 230-239

Paweł Ocłoń, Piotr Cisek, Dawid Taler, Marcin Pilarczyk and Tomasz Szwarc

Volume 92, issue P1, 2015

Experimental study of the combustion process of gaseous fuels containing nitrogen compounds with the use of new, low-emission Zonal Volumetric Combustion technology pp. 3-12

Dariusz Szewczyk, Radosław Jankowski, Rafał Ślefarski and Jan Chmielewski

Energy recovery from ventilation air methane via reverse-flow reactors pp. 13-23

Krzysztof Gosiewski, Anna Pawlaczyk and Manfred Jaschik

Comparative assessment of the energy effects of biomass combustion and co-firing in selected technologies pp. 24-32

Stanisław Tokarski, Krzysztof Głód, Marek Ściążko and Jarosław Zuwała

Full-scale study on halloysite fireside additive in 230 t/h pulverized coal utility boiler pp. 33-39

Sylwester Kalisz, Szymon Ciukaj, Kazimierz Mroczek, Mateusz Tymoszuk, Robert Wejkowski, Marek Pronobis and Henryk Kubiczek

Examinations of the process of hard coal and biomass blend combustion in OEA (oxygen enriched atmosphere) pp. 40-46

Halina Pawlak-Kruczek, Michał Ostrycharczyk, Michał Czerep, Marcin Baranowski and Jacek Zgóra

Optimisation of pulverized coal combustion in O2/CO2/H2O modified atmosphere – Experimental and numerical study pp. 47-53

Bartosz Świątkowski and Ewa Marek

Numerical calculations of the WR-40 boiler with a furnace jet boiler system pp. 54-66

Bartłomiej Hernik

Numerical simulation of SNCR (selective non-catalytic reduction) process in coal fired grate boiler pp. 67-76

Norbert Modliński

A validation of computational fluid dynamics temperature distribution prediction in a pulverized coal boiler with acoustic temperature measurement pp. 77-86

Norbert Modliński, Pawel Madejski, Tomasz Janda, Krzysztof Szczepanek and Wlodzimierz Kordylewski

A numerical study of air preheater leakage pp. 87-99

Avinash Maharaj, Walter Schmitz and Reshendren Naidoo

Numerical study of the effect of fouling on local heat transfer conditions in a high-temperature fin-and-tube heat exchanger pp. 100-116

Stanisław Łopata and Paweł Ocłoń

Simulation of fluid heating in combustion chamber waterwalls of boilers for supercritical steam parameters pp. 117-127

Wiesław Zima, Marzena Nowak-Ocłoń and Paweł Ocłoń

Trends of changes in the power generation system structure and their impact on the system reliability pp. 128-134

Andrzej Rusin and Adam Wojaczek

An optimization of redundant measurements location for thermal capacity of power unit steam boiler calculations using data reconciliation method pp. 135-141

Marcin Szega and Grzegorz Tadeusz Nowak

An approach for estimation of water wall degradation within pulverized-coal boilers pp. 142-152

Janusz Badur, Paweł Ziółkowski, Daniel Sławiński and Sebastian Kornet

Determination of start-up curves for a boiler with natural circulation based on the analysis of stress distribution in critical pressure components pp. 153-159

Jan Taler, Bohdan Węglowski, Dawid Taler, Tomasz Sobota, Piotr Dzierwa, Marcin Trojan, Paweł Madejski and Marcin Pilarczyk

Optimization of the boiler start-up taking into account thermal stresses pp. 160-170

Jan Taler, Piotr Dzierwa, Dawid Taler and Piotr Harchut