Energy

1976 - 2025

Current editor(s): Henrik Lund and Mark J. Kaiser

From Elsevier
Bibliographic data for series maintained by Catherine Liu ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 72, issue C, 2014

Factors affecting biodiesel engine performance and exhaust emissions – Part I: Review pp. 1-16

James Pullen and Khizer Saeed

Factors affecting biodiesel engine performance and exhaust emissions – Part II: Experimental study pp. 17-34

James Pullen and Khizer Saeed

Performance analysis of a modified regenerative Brayton and inverse Brayton cycle pp. 35-43

Mohsen Goodarzi, Mohsen Kiasat and Ehsan Khalilidehkordi

Maximum-efficiency architectures for steady-flow combustion engines, I: Attractor trajectory optimization approach pp. 44-57

Sankaran Ramakrishnan and Christopher F. Edwards

Maximum-efficiency architectures for steady-flow combustion engines, II: Work-regenerative gas turbine engines pp. 58-68

Sankaran Ramakrishnan and Christopher F. Edwards

Thermodynamic study of multi-effect thermal vapour-compression desalination systems pp. 69-79

Oumar Samaké, Nicolas Galanis and Mikhail Sorin

Small adaptations, big impacts: Options for an optimized mix of variable renewable energy sources pp. 80-92

Philip Tafarte, Subhashree Das, Marcus Eichhorn and Daniela Thrän

Parameter identification of solar cells using artificial bee colony optimization pp. 93-102

Diego Oliva, Erik Cuevas and Gonzalo Pajares

Thermo-ecological and exergy replacement costs of nickel processing pp. 103-114

Adriana Domínguez, Lucyna Czarnowska, Alicia Valero, Wojciech Stanek and Antonio Valero

Are structural change and modernisation leading to convergence in the CO2 economy? Decomposition analysis of China, EU and USA pp. 115-125

Jari Kaivo-oja, J. Luukkanen, J. Panula-Ontto, J. Vehmas, Y. Chen, S. Mikkonen and B. Auffermann

Modeling natural gas price volatility: The case of the UK gas market pp. 126-134

Harm van Goor and Bert Scholtens

Displacer gap losses in beta and gamma Stirling engines pp. 135-144

M.T. Mabrouk, A. Kheiri and M. Feidt

Simultaneous use of MRM (maximum rectangle method) and optimization methods in determining nominal capacity of gas engines in CCHP (combined cooling, heating and power) systems pp. 145-158

Sepehr Sanaye and Navid Khakpaay

Fluid selection of Organic Rankine Cycle for low-temperature waste heat recovery based on thermal optimization pp. 159-167

Filippo Cataldo, Rita Mastrullo, Alfonso William Mauro and Giuseppe Peter Vanoli

How much CO2 emissions will be reduced through industrial structure change if China focuses on domestic rather than international welfare? pp. 168-179

Yongbin Zhu, Yajuan Shi and Zheng Wang

Volatile species release during torrefaction of wood and its macromolecular constituents: Part 1 – Experimental study pp. 180-187

Timothée Nocquet, Capucine Dupont, Jean-Michel Commandre, Maguelone Grateau, Sébastien Thiery and Sylvain Salvador

Volatile species release during torrefaction of biomass and its macromolecular constituents: Part 2 – Modeling study pp. 188-194

Timothée Nocquet, Capucine Dupont, Jean-Michel Commandre, Maguelone Grateau, Sébastien Thiery and Sylvain Salvador

Experimental study on temperature variation in a porous inert media burner for premixed methane air combustion pp. 195-200

Hongmin Wang, Chunzhi Wei, Pinghui Zhao and Taohong Ye

Thermodynamic analysis of a coal-based polygeneration system with partial gasification pp. 201-214

Yuanyuan Li, Guoqiang Zhang, Yongping Yang, Dailong Zhai, Kai Zhang and Gang Xu

Fabrication and operating characteristics of a flat tubular segmented-in-series solid oxide fuel cell unit bundle pp. 215-221

Dae-Wi Kim, Ui-Jin Yun, Jong-Won Lee, Tak-Hyoung Lim, Seung-Bok Lee, Seok-Joo Park, Rak-Hyun Song and Guntae Kim

Prediction of biomass-generated syngas using extents of major reactions in a continuous stirred-tank reactor pp. 222-232

Ashokkumar M. Sharma, Ajay Kumar, Sundararajan Madihally, James R. Whiteley and Raymond L. Huhnke

The linkage between crude oil consumption and economic growth in Latin America: The panel framework investigations for multiple regions pp. 233-241

Niaz Bashiri Behmiri and Jose Ramos Manso

Combustion of CH4/O2/N2 in a well stirred reactor pp. 242-253

Feifei Wang, Pengfei Li, Zhenfeng Mei, Jianpeng Zhang and Jianchun Mi

Matrix method for comparing system and individual energy return ratios when considering an energy transition pp. 254-265

Carey W. King

Mathematical modeling and process parameters optimization studies by artificial neural network and response surface methodology: A case of non-edible neem (Azadirachta indica) seed oil biodiesel synthesis pp. 266-273

Eriola Betiku, Oluwasesan Ropo Omilakin, Sheriff Olalekan Ajala, Adebisi Aminat Okeleye, Abiola Ezekiel Taiwo and Bamidele Ogbe Solomon

Predicting the physical–chemical properties of biodiesel fuels assessing the molecular structure with the SAFT−γ group contribution approach pp. 274-290

Felipe A. Perdomo, Beatriz M. Millán and José L. Aragón

A novel distributed optimal power sharing method for radial dc microgrids with different distributed energy sources pp. 291-299

R. Asad and A. Kazemi

A three-dimensional transient model for EGS subsurface thermo-hydraulic process pp. 300-310

Fangming Jiang, Jiliang Chen, Wenbo Huang and Liang Luo

Heat integration of fractionating systems in para-xylene plants based on column optimization pp. 311-321

Ting Chen, Bingjian Zhang and Qinglin Chen

Significance of loss correlations in performance prediction of small scale, highly loaded turbine stages working in Organic Rankine Cycles pp. 322-330

Piotr Klonowicz, Florian Heberle, Markus Preißinger and Dieter Brüggemann

Heat transfer and film cooling effectiveness on the squealer tip of a turbine blade pp. 331-343

Jun Su Park, Dong Hyun Lee, Dong-Ho Rhee, Shin Hyung Kang and Hyung Hee Cho

Thermal and thermohydraulic performance evaluation of a novel type double pass packed bed solar air heater under external recycle using an analytical and RSM (response surface methodology) combined approach pp. 344-359

Satyender Singh and Prashant Dhiman

The application of power-to-gas, pumped hydro storage and compressed air energy storage in an electricity system at different wind power penetration levels pp. 360-370

Harmen Sytze de Boer, Lukas Grond, Henk Moll and René Benders

Paraffin/diatomite/multi-wall carbon nanotubes composite phase change material tailor-made for thermal energy storage cement-based composites pp. 371-380

Biwan Xu and Zongjin Li

Heat transfer characteristics of thermal energy storage of a composite phase change materials: Numerical and experimental investigations pp. 381-392

Moussa Aadmi, Mustapha Karkri and Mimoun El Hammouti

Mathematical approach to the characterization of daily energy balance in autonomous photovoltaic solar systems pp. 393-404

F.J. Casares, R. Lopez-Luque, R. Posadillo and M. Varo-Martinez

An important feature of air heat pump cycle: Heating capacity in line with heating load pp. 405-413

Chun-Lu Zhang and Han Yuan

Thermophysical characterization of Mg–51%Zn eutectic metal alloy: A phase change material for thermal energy storage in direct steam generation applications pp. 414-420

P. Blanco-Rodríguez, J. Rodríguez-Aseguinolaza, E. Risueño and M. Tello

Improved hydrogen generation from the hydrolysis of aluminum ball milled with hydride pp. 421-426

Yongan Liu, Xinhua Wang, Haizhen Liu, Zhaohui Dong, Shouquan Li, Hongwei Ge and Mi Yan

Banking development and energy consumption: Evidence from a panel of Middle Eastern countries pp. 427-433

Alper Aslan, Nicholas Apergis and Mert Topcu

Short term electric load forecasting by wavelet transform and grey model improved by PSO (particle swarm optimization) algorithm pp. 434-442

Saadat Bahrami, Rahmat-Allah Hooshmand and Moein Parastegari

Features of a fully renewable US electricity system: Optimized mixes of wind and solar PV and transmission grid extensions pp. 443-458

Sarah Becker, Bethany A. Frew, Gorm B. Andresen, Timo Zeyer, Stefan Schramm, Martin Greiner and Mark Z. Jacobson

Improved exergoeconomic analysis of a retrofitted natural gas-based cogeneration system pp. 459-475

Xianglong Luo, Jiahao Hu, Jun Zhao, Bingjian Zhang, Ying Chen and Songping Mo

A facility-location model for biofuel plants: Applications in the Colombian context pp. 476-483

Alexandra E. Duarte, William A. Sarache and Yasel J. Costa

Comparison of particle swarm optimization and other metaheuristics on electricity demand estimation: A case study of Iran pp. 484-491

Alireza Askarzadeh

Improving vortex tube performance based on vortex generator design pp. 492-500

Mahmood Farzaneh-Gord and Meisam Sadi

Hybrid-input power supply with PFC (power factor corrector) and MPPT (maximum power point tracking) features for battery charging and HB-LED driving pp. 501-509

Chih-Lung Shen and Yong-Xian Ko

Mean-variance model for power system economic dispatch with wind power integrated pp. 510-520

Y.Z. Li, Q.H. Wu, M.S. Li and J.P. Zhan

Numerical simulation and process optimization of an aluminum holding furnace based on response surface methodology and uniform design pp. 521-535

Ji-min Wang, Shen Lan and Wen-ke Li

Degradation analysis of a-Si, (HIT) hetro-junction intrinsic thin layer silicon and m-C-Si solar photovoltaic technologies under outdoor conditions pp. 536-546

Vikrant Sharma, O.S. Sastry, Arun Kumar, Birinchi Bora and S.S. Chandel

Development and testing of a hybrid system with a sub-kW open-cathode type PEM (proton exchange membrane) fuel cell stack pp. 547-553

Zhen-Ming Huang, Ay Su and Ying-Chieh Liu

On the determinants of renewable energy consumption: International evidence pp. 554-560

Anis Omri and Duc Khuong Nguyen

An integrated optimization for organic Rankine cycle based on entransy theory and thermodynamics pp. 561-573

Tailu Li, Wencheng Fu and Jialing Zhu

Analysis of regulation methods of a combined heat and power plant based on gas turbines pp. 574-589

Francisco Jiménez-Espadafor Aguilar, R. Rodríguez Quintero, E. Carvajal Trujillo and Miguel Torres García

Chemisorption cooling and electric power cogeneration system driven by low grade heat pp. 590-598

Huashan Bao, Yaodong Wang, Constantinos Charalambous, Zisheng Lu, Liwei Wang, Ruzhu Wang and Anthony Paul Roskilly

Exergy analysis of gas turbine with air bottoming cycle pp. 599-607

M. Ghazikhani, I. Khazaee and E. Abdekhodaie

Combustion and emission characteristics of a DME (dimethyl ether)-diesel dual fuel premixed charge compression ignition engine with EGR (exhaust gas recirculation) pp. 608-617

Yuwei Zhao, Ying Wang, Dongchang Li, Xiong Lei and Shenghua Liu

Bio-lubricant-biodiesel combination of rapeseed oil: An experimental investigation on engine oil tribology, performance, and emissions of variable compression engine pp. 618-627

S. Arumugam, G. Sriram and R. Ellappan

High efficiency bio-hydrogen production from glucose revealed in an inoculum of heat-pretreated landfill leachate sludge pp. 628-635

Y.M. Wong, J.C. Juan, Adeline Ting and T.Y. Wu

Enhanced heat transfer characteristics of water based copper oxide nanofluid PCM (phase change material) in a spherical capsule during solidification for energy efficient cool thermal storage system pp. 636-642

P. Chandrasekaran, M. Cheralathan, V. Kumaresan and R. Velraj

Diagnosis and redesign of power plants using combined Pinch and Exergy Analysis pp. 643-651

Alejandro Arriola-Medellín, Emilio Manzanares-Papayanopoulos and César Romo-Millares

Coastal impact assessment of a generic wave farm operating in the Romanian nearshore pp. 652-670

Andrei Tănase Zanopol, Florin Onea and Eugen Rusu

Investigation of in-cylinder gas stratification of diesel engine during intake and compression stroke pp. 671-679

Zhaojie Shen, Zhongchang Liu, Jing Tian and Jiangwei Liu

Thermo-economic and environmental optimization of solar assisted heat pump by using multi-objective particle swam algorithm pp. 680-690

Ehsan Khorasaninejad and Hassan Hajabdollahi

Floating vs. bottom-fixed turbines for tidal stream energy: A comparative impact assessment pp. 691-701

M. Sanchez, R. Carballo, V. Ramos and G. Iglesias

Comparison of closed and open thermochemical processes, for long-term thermal energy storage applications pp. 702-716

Benoit Michel, Pierre Neveu and Nathalie Mazet

Power substation location selection using fuzzy analytic hierarchy process and PROMETHEE: A case study from Bangladesh pp. 717-730

Golam Kabir and Razia Sultana Sumi

Numerical optimization of solar air heaters having different types of roughness shapes on the heated plate – Technical note pp. 731-738

Anil Kumar and Man-Hoe Kim

Analysis of the integrated characteristics of the CPS (combined power system) of a bottoming organic Rankine cycle and a diesel engine pp. 739-751

Chen Yue, Dong Han and Wenhao Pu

Maximizing the transferred power to electric arc furnace for having maximum production pp. 752-759

Haidar Samet, Teymoor Ghanbari and Jafar Ghaisari

Investigation on combustion performance and emission characteristics of a DI (direct injection) diesel engine fueled with biogas–diesel in dual fuel mode pp. 760-771

Debabrata Barik and S. Murugan

Sectoral comparison of electricity-saving potentials in China: An analysis based on provincial input–output tables pp. 772-782

F.Y. Meng, D.Q. Zhou, P. Zhou and Y. Bai

Energy technology allocation for distributed energy resources: A strategic technology-policy framework pp. 783-799

Sreekanth Mallikarjun and Herbert F. Lewis

Experimental and numerical flow investigation of Stirling engine regenerator pp. 800-812

Sol-Carolina Costa, Mustafa Tutar, Igor Barreno, Jon-Ander Esnaola, Haritz Barrutia, David García, Miguel-Angel González and Jesús-Ignacio Prieto

Impact of biodiesel blend on injector deposit formation pp. 813-823

A.M. Liaquat, H.H. Masjuki, M.A. Kalam and I.M. Rizwanul Fattah

Maximizing coal-fired power plant efficiency with integration of amine-based CO2 capture in greenfield and retrofit scenarios pp. 824-831

David H. Van Wagener, Ulrich Liebenthal, Jorge M. Plaza, Alfons Kather and Gary T. Rochelle