Energy

1976 - 2025

Current editor(s): Henrik Lund and Mark J. Kaiser

From Elsevier
Bibliographic data for series maintained by Catherine Liu ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 75, issue C, 2014

The use of reduced models for design and optimisation of heat-integrated crude oil distillation systems pp. 5-13

Lluvia M. Ochoa-Estopier, Megan Jobson and Robin Smith

Data reconciliation and gross error detection for operational data in power plants pp. 14-23

Xiaolong Jiang, Pei Liu and Zheng Li

Transshipment model-based linear programming formulation for targeting hybrid power systems with power loss considerations pp. 24-30

Cheng-Liang Chen, Chieh-Ting Lai and Jui-Yuan Lee

Integrated biomass and solar town: Incorporation of load shifting and energy storage pp. 31-39

Haslenda Hashim, Wai Shin Ho, Jeng Shiun Lim and Sandro Macchietto

Syngas production from palm kernel shell and polyethylene waste blend in fluidized bed catalytic steam co-gasification process pp. 40-44

Reza Alipour Moghadam, Suzana Yusup, Yoshimitsu Uemura, Bridgid Lai Fui Chin, Hon Loong Lam and Ahmed Al Shoaibi

Assessing thermal energy storage technologies of concentrating solar plants for the direct coupling with chemical processes. The case of solar-driven biomass gasification pp. 45-52

Flavio Manenti, Andres R. Leon-Garzon, Zohreh Ravaghi-Ardebili and Carlo Pirola

Integration of industrial solar and gaseous waste heat into heat recovery loops using constant and variable temperature storage pp. 53-67

Timothy G. Walmsley, Michael R.W. Walmsley, Martin J. Atkins and James R. Neale

Towards low carbon business park energy systems: Classification of techno-economic energy models pp. 68-80

Jonas Timmerman, Lieven Vandevelde and Greet Van Eetvelde

Modeling and simulation of CO methanation process for renewable electricity storage pp. 81-88

Hanaâ Er-rbib and Chakib Bouallou

Large eddy simulation of a two-phase reacting swirl flow inside a cement cyclone pp. 89-96

Hrvoje Mikulčić, Milan Vujanović, Moh'd Sami Ashhab and Neven Duić

Heat transfer evaluation of an enhanced heat transfer tube bundle pp. 97-103

David J. Kukulka and Rick Smith

Improvements on maldistribution of a high temperature multi-channel compact heat exchanger by different inlet baffles pp. 104-115

Wen-xiao Chu, Ting Ma, Min Zeng, Ting Qu, Liang-bi Wang and Qiu-wang Wang

Experimental study on the influence of oxygen content in the combustion air on the combustion characteristics pp. 116-126

Petr Bělohradský, Pavel Skryja and Igor Hudák

Mixed-waste pyrolysis of biomass and plastics waste – A modelling approach to reduce energy usage pp. 127-135

Adetoyese Olajire Oyedun, Tesfaldet Gebreegziabher, Denny K.S. Ng and Chi Wai Hui

The impact of system configuration on material utilization in the coal-based polygeneration of methanol and electricity pp. 136-145

Jianyun Zhang, Linwei Ma, Zheng Li and Weidou Ni

Drying kinetics of olive stone: A valuable source of biomass obtained in the olive oil extraction pp. 146-152

Francisco J. Gómez-de la Cruz, Pedro J. Casanova-Peláez, José M. Palomar-Carnicero and Fernando Cruz-Peragón

Understanding the water-energy-carbon nexus in urban water utilities: Comparison of four city case studies and the relevant influencing factors pp. 153-166

G. Venkatesh, Arthur Chan and Helge Brattebø

Design, architecture and implementation of a residential energy box management tool in a SmartGrid pp. 167-181

Christos S. Ioakimidis, Luís J. Oliveira, Konstantinos N. Genikomsakis and Panagiotis I. Dallas

Strategic techno-economic assessment of heat network options for distributed energy systems in the UK pp. 182-193

Asim Ahmed and Pierluigi Mancarella

Well-to-wheel analysis of direct and indirect use of natural gas in passenger vehicles pp. 194-203

Scott J. Curran, Robert M. Wagner, Ronald L. Graves, Martin Keller and Johney B. Green

The effect of storage temperature on the performance of a thermo-electric energy storage using a transcritical CO2 cycle pp. 204-215

Young-Jin Baik, Jaehyeok Heo, Junemo Koo and Minsung Kim

Miniature horizontal axis wind turbine system for multipurpose application pp. 216-224

F.J. Xu, F.G. Yuan, J.Z. Hu and Y.P. Qiu

Low temperature Stirling engines pressurised with real gas effects pp. 225-236

Fernando Sala and Costante M. Invernizzi

Optimal chiller loading for energy conservation using a new differential cuckoo search approach pp. 237-243

Leandro dos Santos Coelho, Carlos Eduardo Klein, Samrat L. Sabat and Viviana Cocco Mariani

Modelling and forecasting the trends of life cycle curves in the production of non-renewable resources pp. 244-251

V.K. Semenychev, E.I. Kurkin and E.V. Semenychev

Artificial neural networks for short-term load forecasting in microgrids environment pp. 252-264

Luis Hernández, Carlos Baladrón, Javier M. Aguiar, Belén Carro, Antonio Sánchez-Esguevillas and Jaime Lloret

Energy storage systems supporting increased penetration of renewables in islanded systems pp. 265-280

E.M.G. Rodrigues, R. Godina, S.F. Santos, A.W. Bizuayehu, J. Contreras and J.P.S. Catalão

In-field assessment of batteries and PV modules in a large photovoltaic rural electrification programme pp. 281-288

L.M. Carrasco, L. Narvarte, F. Martínez-Moreno and R. Moretón

Numerical simulation on effects of spray angle in a swirl chamber combustion system of DI (direct injection) diesel engines pp. 289-294

Shengli Wei, Kunpeng Ji, Xianyin Leng, Feihu Wang and Xin Liu

Estimates of energy consumption in Turkey using neural networks with the teaching–learning-based optimization algorithm pp. 295-303

Ergun Uzlu, Murat Kankal, Adem Akpınar and Tayfun Dede

Exergy analysis of a 300 MW lignite thermoelectric power plant pp. 304-311

Christopher J. Koroneos, Paris A. Fokaides and Elias A. Christoforou

A high efficient combined multi-effect evaporation–absorption heat pump and vapor-compression refrigeration part 1: Energy and economic modeling and analysis pp. 312-326

Iman Janghorban Esfahani, Yong Tae Kang and ChangKyoo Yoo

A highly efficient combined multi-effect evaporation-absorption heat pump and vapor-compression refrigeration part 2: Thermoeconomic and flexibility analysis pp. 327-337

Iman Janghorban Esfahani and Changkyoo Yoo

Operating characteristics of thermoacoustic compression based on alternating to direct gas flow conversion pp. 338-348

Kai Wang, Daming Sun, Ya Xu, Jiang Zou, Xiaobin Zhang and Limin Qiu

A novel conceptual design of parallel nitrogen expansion liquefaction process for small-scale LNG (liquefied natural gas) plant in skid-mount packages pp. 349-359

Tianbiao He and Yonglin Ju

Heat extraction and power production forecast of a prospective Enhanced Geothermal System site in Songliao Basin, China pp. 360-370

Xiaoxue Huang, Jialing Zhu, Chengke Niu, Jun Li, Xia Hu and Xianpeng Jin

Thermal performance estimation of ammonia-water plate bubble absorbers for compression/absorption hybrid heat pump application pp. 371-378

Chung Woo Jung, Seung Sun An and Yong Tae Kang

Experimental study on a hybrid energy system with small- and medium-scale applications for mild climates pp. 379-389

S. Nizetic, D. Coko and I. Marasovic

Adsorption cooling utilizing the “LiBr/silica – ethanol” working pair: Dynamic optimization of the adsorber/heat exchanger unit pp. 390-399

Larisa Gordeeva, Andrea Frazzica, Alessio Sapienza, Yuri Aristov and Angelo Freni

Ferrohydrodynamic and magnetohydrodynamic effects on ferrofluid flow and convective heat transfer pp. 400-410

Mohsen Sheikholeslami and Davood Domiri Ganji

Life cycle cost analysis of wind power considering stochastic uncertainties pp. 411-418

Chiao-Ting Li, Huei Peng and Jing Sun

Prediction of thermophysical properties of saturated steam and wellbore heat losses in concentric dual-tubing steam injection wells pp. 419-429

Hao Gu, Linsong Cheng, Shijun Huang, Baojian Du and Changhao Hu

Performance improvement of shrouded turbines with the management of casing endwall interaction flows pp. 430-442

Jie Gao, Qun Zheng and Xiaoquan Jia

Feasibility study of a combined Ocean Thermal Energy Conversion method in South Korea pp. 443-452

Hoon Jung and Jungho Hwang

Zn,Al-catalysts for heterogeneous biodiesel production: Basicity and process optimization pp. 453-462

Paula Moraes Veiga, Aderval Severino Luna, Marcio de Figueiredo Portilho, Cláudia de Oliveira Veloso and Cristiane Assumpção Henriques

Applying analytics in the energy industry: A case study of heat rate and opacity prediction in a coal-fired power plant pp. 463-473

Jongsawas Chongwatpol and Thanrawee Phurithititanapong

The selection of key technologies by the silicon photovoltaic industry based on the Delphi method and AHP (analytic hierarchy process): Case study of China pp. 474-482

Yong Tang, Honghang Sun, Qiang Yao and Yibo Wang

Market power, fuel substitution and infrastructure – A large-scale equilibrium model of global energy markets pp. 483-500

Daniel Huppmann and Rudolf Egging-Bratseth

Experimental investigation of the effect of using thermosyphon heat pipes and vacuum glass on the performance of solar still pp. 501-507

S. Jahangiri Mamouri, H. Gholami Derami, M. Ghiasi, M.B. Shafii and Z. Shiee

Characteristics of energy-efficient swimming facilities – A case study pp. 508-512

Wolfgang Kampel, Bjørn Aas and Amund Bruland

An experimental study of injection and spray characteristics of diesel and gasoline blends on a common rail injection system pp. 513-519

Dong Han, Chunhai Wang, Yaozong Duan, Zhisong Tian and Zhen Huang

High performance FeTi – 3.1 mass % V alloy for on board hydrogen storage solution pp. 520-524

Sanjay Kumar, G.P. Tiwari, Sagar Sonak, Uttam Jain and Nagaiyar Krishnamurthy

Electrode design optimization of lithium secondary batteries to enhance adhesion and deformation capabilities pp. 525-533

Dongho Jeong and Jongsoo Lee

Numerical investigation of impeller trimming effect on performance of an axial flow fan pp. 534-548

Chunxi Li, Xinying Li, Pengmin Li and Xuemin Ye

Pd nanoparticles with tunable diameter deposited on carbon nanotubes with enhanced hydrogen storage capacity pp. 549-554

Karolina Wenelska, Beata Michalkiewicz, Xuecheng Chen and Ewa Mijowska

Liquid antimony anode direct carbon fuel cell fueled with mass-produced de-ash coal pp. 555-559

Hongjian Wang, Tianyu Cao, Yixiang Shi, Ningsheng Cai and Wei Yuan

Is there any relationship between energy and TFP (total factor productivity)? A panel cointegration approach for Italian regions pp. 560-567

Maria Gabriela Ladu and Marta Meleddu

The simple hourly method of EN ISO 13790 standard in Matlab/Simulink: A comparative study for the climatic conditions of Poland pp. 568-578

Piotr Michalak

Study of a molten carbonate fuel cell combined heat, hydrogen and power system pp. 579-588

Tarek A. Hamad, Abdulhakim A. Agll, Yousif M. Hamad, Sushrut Bapat, Mathew Thomas, Kevin B. Martin and John W. Sheffield

Modeling of a thermal adsorber powered by solar energy for refrigeration applications pp. 589-596

A. Allouhi, T. Kousksou, A. Jamil and Y. Zeraouli

TiO2 coated three-dimensional hierarchically ordered porous sulfur electrode for the lithium/sulfur rechargeable batteries pp. 597-602

Hongqiang Wang, Sha Li, Dan Li, Zhixin Chen, Hua Kun Liu and Zaiping Guo

Comparative assessment of the linear driving force and pseudo-gas-side-controlled models for the prediction of mass transfer in desiccant matrices pp. 603-612

Celestino R. Ruivo, António R. Figueiredo and José J. Costa

Correlations for the mass transfer coefficient in desiccant matrices when using linear driving force and pseudo-gas-side-controlled models pp. 613-623

Celestino R. Ruivo, António R. Figueiredo and José J. Costa

A study of CO2 precipitation method considering an ionic CO2 and Ca(OH)2 slurry pp. 624-629

Sangwon Park, Hoyong Jo, Dongwoo Kang and Jinwon Park