Applied Energy

1975 - 2025

Current editor(s): J. Yan

From Elsevier
Bibliographic data for series maintained by Catherine Liu ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

2015, volume 138, articles C

Effectiveness of pavement-solar energy system – An experimental study pp. 1-10

Zhihua Zhou, Xiaojuan Wang, Xiaoyan Zhang, Guanyi Chen, Jian Zuo and Stephen Pullen

Theoretical and experimental investigation of the Miller cycle diesel engine in terms of performance and emission parameters pp. 11-20

Guven Gonca, Bahri Sahin, Adnan Parlak, Yasin Ust, Vezir Ayhan, İdris Cesur and Barış Boru

A low-temperature partial-oxidation-methanol micro reformer with high fuel conversion rate and hydrogen production yield pp. 21-30

Hsueh-Sheng Wang, Kuo-Yang Huang, Yuh-Jeen Huang, Yu-Chuan Su and Fan-Gang Tseng

Cr-methanol fuel cell for efficient Cr(VI) removal and high power production pp. 31-35

Qing-Yun Chen, Rong Fu, Xiao-Wen Fang, Wen-Fang Cai, Yun-Hai Wang and Shao-An Cheng

Climate effects of bioenergy from forest residues in comparison to fossil energy pp. 36-50

Leif Gustavsson, Sylvia Haus, Carina A. Ortiz, Roger Sathre and Nguyen Le Truong

An energy signal tool for decision support in building energy systems pp. 51-70

Gregor P. Henze, Gregory S. Pavlak, Anthony R. Florita, Robert H. Dodier and Adam I. Hirsch

A pseudo-optimal inexact stochastic interval T2 fuzzy sets approach for energy and environmental systems planning under uncertainty: A case study for Xiamen City of China pp. 71-90

L. Jin, G.H. Huang, Y.R. Fan, L. Wang and T. Wu

Emission reductions studies of a biodiesel engine using EGR and SCR for agriculture operations in developing countries pp. 91-98

C. Solaimuthu, V. Ganesan, D. Senthilkumar and K.K. Ramasamy

Urban energy consumption: Different insights from energy flow analysis, input–output analysis and ecological network analysis pp. 99-107

Shaoqing Chen and Bin Chen

The 20% house – An integrated assessment of options for reducing net carbon emissions from existing UK houses pp. 108-120

J.G. Rogers, S.J.G. Cooper, O’Grady, Á., M.C. McManus, H.R. Howard and G.P. Hammond

Study of solar regenerated membrane desiccant system to control humidity and decrease energy consumption in office spaces pp. 121-132

Khoudor Keniar, Kamel Ghali and Nesreen Ghaddar

Energy and environmental comparison of two-stage solutions for commercial refrigeration at low temperature: Fluids and systems pp. 133-142

Rodrigo Llopis, Daniel Sánchez, Carlos Sanz-Kock, Ramón Cabello and Enrique Torrella

The effects of air stoichiometry and air excess ratio on the transient response of a PEMFC under load change conditions pp. 143-149

Bosung Kim, Dowon Cha and Yongchan Kim

Energy and complexity: New ways forward pp. 150-159

Catherine S.E. Bale, Liz Varga and Timothy Foxon

Assessment of off-design performance of a small-scale combined cooling and power system using an alternative operating strategy for gas turbine pp. 160-168

Wei Han, Qiang Chen, Ru-mou Lin and Hong-guang Jin

The energy efficiency ratio of heat storage in one shell-and-one tube phase change thermal energy storage unit pp. 169-182

Wei-Wei Wang, Liang-Bi Wang and Ya-Ling He

Selective catalytic reduction of NO in a reverse-flow reactor: Modelling and experimental validation pp. 183-192

Emilio Muñoz, Pablo Marín, Fernando V. Díez and Salvador Ordóñez

Non-isothermal crystallization of aqueous nanofluids with high aspect-ratio carbon nano-additives for cold thermal energy storage pp. 193-201

Li-Wu Fan, Xiao-Li Yao, Xiao Wang, Yu-Yue Wu, Xue-Ling Liu, Xu Xu and Zi-Tao Yu

Ca-looping for postcombustion CO2 capture: A comparative analysis on the performances of dolomite and limestone pp. 202-215

J.M. Valverde, P.E. Sanchez-Jimenez and L.A. Perez-Maqueda

Environmental impacts related to the commissioning and usage phase of an intelligent energy management system pp. 216-223

Marta Gangolells, Miquel Casals, Núria Forcada, Marcel Macarulla and Alberto Giretti

Energy and economic analysis of geothermal–solar trigeneration systems: A case study for a hotel building in Ischia pp. 224-241

Annamaria Buonomano, Francesco Calise, Adolfo Palombo and Maria Vicidomini

Numerical analysis of the optimum membrane/ionomer water content of PEMFCs: The interaction of Nafion® ionomer content and cathode relative humidity pp. 242-257

Lei Xing, Prodip K. Das, Xueguan Song, Mohamed Mamlouk and Keith Scott

Energy saving potential of various air-side economizers in a modular data center pp. 258-275

Sang-Woo Ham, Min-Hwi Kim, Byung-Nam Choi and Jae-Weon Jeong

Start-up modes of thermoelectric generator based on vehicle exhaust waste heat recovery pp. 276-290

Shuhai Yu, Qing Du, Hai Diao, Gequn Shu and Kui Jiao

Experimental performance of evaporative cooling pad systems in greenhouses in humid subtropical climates pp. 291-301

J. Xu, Y. Li, R.Z. Wang, W. Liu and P. Zhou

Multi-objective particle swarm optimization of binary geothermal power plants pp. 302-314

Joshua Clarke and James T. McLeskey

Closed-loop control of HCCI combustion for DME using external EGR and rebreathed EGR to reduce pressure-rise rate with combustion-phasing retard pp. 315-330

Dongwon Jung and Norimasa Iida

A crack-free and super-hydrophobic cathode micro-porous layer for direct methanol fuel cells pp. 331-336

X.H. Yan, T.S. Zhao, L. An, G. Zhao and L. Zeng

An air-based corrugated cavity-receiver for solar parabolic trough concentrators pp. 337-345

Roman Bader, Andrea Pedretti, Maurizio Barbato and Aldo Steinfeld

Alternative thermochemical routes for aviation biofuels via alcohols synthesis: Process modeling, techno-economic assessment and comparison pp. 346-366

Konstantinos Atsonios, Michael-Alexander Kougioumtzis, Kyriakos D. Panopoulos and Emmanuel Kakaras

Comparative cradle-to-gate life cycle assessment of wood pellet production with torrefaction pp. 367-380

P.W.R. Adams, J.E.J. Shirley and M.C. McManus

Numerical analysis of a shell-and-tube latent heat storage unit with fins for air-conditioning application pp. 381-392

Dongliang Zhao and Gang Tan

Fleet view of electrified transportation reveals smaller potential to reduce GHG emissions pp. 393-403

Christoph J. Meinrenken and Klaus S. Lackner

Decreasing energy use and influence to environment by radiant panel heating using different energy sources pp. 404-413

Milorad Bojić, Dragan Cvetković and Ljubiša Bojić

Energy efficient hotspot-targeted embedded liquid cooling of electronics pp. 414-422

Chander Shekhar Sharma, Manish K. Tiwari, Severin Zimmermann, Thomas Brunschwiler, Gerd Schlottig, Bruno Michel and Dimos Poulikakos

An MILP model for optimization of a small-scale LNG supply chain along a coastline pp. 423-431

Raine Jokinen, Frank Pettersson and Henrik Saxén

Multi-objective efficiency enhancement using workload spreading in an operational data center pp. 432-444

Ali Habibi Khalaj, Thomas Scherer, Jayantha Siriwardana and Saman K. Halgamuge

Impact of heat transfer on the performance of micro gas turbines pp. 445-449

Dries Verstraete and Carlos Bowkett

Measuring energy efficiency: Is energy intensity a good evidence base? pp. 450-459

Liliana Proskuryakova and A. Kovalev

Performance prediction of HCCI engines with oxygenated fuels using artificial neural networks pp. 460-473

Javad Rezaei, Mahdi Shahbakhti, Bahram Bahri and Azhar Abdul Aziz

Externally fired gas turbine technology: A review pp. 474-487

K.A. Al-attab and Z.A. Zainal

Development of PN emission factors for the real world urban driving conditions of a hybrid city bus pp. 488-495

Seref Soylu

An inverse method for calculation of thermal inertia and heat gain in air conditioning and refrigeration systems pp. 496-504

M.A. Fayazbakhsh, F. Bagheri and M. Bahrami

Experimental validation of a thermodynamic boiler model under steady state and dynamic conditions pp. 505-516

Elisa Carlon, Vijay Kumar Verma, Markus Schwarz, Laszlo Golicza, Alessandro Prada, Marco Baratieri, Walter Haslinger and Christoph Schmidl

Design and performance prediction of radial ORC turboexpanders pp. 517-532

Daniele Fiaschi, Giampaolo Manfrida and Francesco Maraschiello

Experimental assessment of the energy performance of a hybrid desiccant cooling system and comparison with other air-conditioning technologies pp. 533-545

Giovanni Angrisani, Carlo Roselli and Maurizio Sasso

Economic assessment of novel amine based CO2 capture technologies integrated in power plants based on European Benchmarking Task Force methodology pp. 546-558

G. Manzolini, E. Sanchez Fernandez, S. Rezvani, E. Macchi, E.L.V. Goetheer and T.J.H. Vlugt

Indicative energy technology assessment of advanced rechargeable batteries pp. 559-571

Geoffrey P. Hammond and Tom Hazeldine

Comparative study of the thermal and power performances of a semi-transparent photovoltaic façade under different ventilation modes pp. 572-583

Jinqing Peng, Lin Lu, Hongxing Yang and Tao Ma

Impact of potassium promoter on Cu–Fe based mixed alcohols synthesis catalyst pp. 584-589

Mingyue Ding, Junling Tu, Minghuang Qiu, Tiejun Wang, Longlong Ma and Yuping Li

Capability of smart appliances to provide reserve services pp. 590-597

Silviu Nistor, Jianzhong Wu, Mahesh Sooriyabandara and Janaka Ekanayake

An experimental study on the negative effects of downwards flow of the melted frost over a multi-circuit outdoor coil in an air source heat pump during reverse cycle defrosting pp. 598-604

Mengjie Song, Dongmei Pan, Ning Li and Shiming Deng

An assessment of solar-powered organic Rankine cycle systems for combined heating and power in UK domestic applications pp. 605-620

James Freeman, Klaus Hellgardt and Christos N. Markides

Torrefied versus conventional pellet production – A comparative study on energy and emission balance based on pilot-plant data and EU sustainability criteria pp. 621-630

D. Agar, J. Gil, D. Sanchez, I. Echeverria and M. Wihersaari

Effects of structural design on the performance of electrical double layer capacitors pp. 631-639

Ali Ghorbani Kashkooli, Siamak Farhad, Victor Chabot, Aiping Yu and Zhongwei Chen

Innovative and precise MPP estimation using P–V curve geometry for photovoltaics pp. 640-647

Gaurav Kumar, Milind B. Trivedi and Ashish K. Panchal

Thermal performance of a radiant floor heating system with different heat storage materials and heating pipes pp. 648-660

Guobing Zhou and Jing He

Development of bifunctional microencapsulated phase change materials with crystalline titanium dioxide shell for latent-heat storage and photocatalytic effectiveness pp. 661-674

Luxiao Chai, Xiaodong Wang and Dezhen Wu

The effects of radiative heat transfer during the melting process of a high temperature phase change material confined in a spherical shell pp. 675-684

Antonio Ramos Archibold, Muhammad M. Rahman, D. Yogi Goswami and Elias K. Stefanakos

Options for residential building services design using fuel cell based micro-CHP and the potential for heat integration pp. 685-694

Alexandros Adam, Eric S. Fraga and Dan J.L. Brett

Review of real-time electricity markets for integrating Distributed Energy Resources and Demand Response pp. 695-706

Qi Wang, Chunyu Zhang, Yi Ding, George Xydis, Jianhui Wang and Jacob Østergaard