Applied Energy

1975 - 2025

Current editor(s): J. Yan

From Elsevier
Bibliographic data for series maintained by Catherine Liu ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Multi-vane expander performance: Breathing characteristics pp. 241-271: O. Badr, P.W. O'Callaghan and S.D. Probert
Heat losses from a salt-gradient solar pond pp. 273-285: R.S. Beniwal, Ram Vir Singh and D.R. Chaudhary
Heat exchanger design: Optimal uniform separation between rectangular fins protruding from a vertical rectangular base pp. 287-299: C.W. Leung, S.D. Probert and M.J. Shilston
Electric power generation expansion: Planning with multiple objectives pp. 301-319: M.A. Quaddus and T.N. Goh

Multi-vane expanders: Geometry and vane kinematics pp. 159-182: O. Badr, P.W. O'Callaghan and S.D. Probert
Solar air-heater: Steady-state and periodic analyses pp. 183-195: Ashok Kumar Bhargava, H.P. Garg and V.K. Sharma
Automatic aiming and tracking of the solar disc using photosensitive charge coupled devices (CCD) pp. 197-208: G. Bolle, G. Ciccarella and P. Marietti
Modelling and simulation of a solar absorption cooling system pp. 209-229: T. Muneer and A.H. Uppal
Optical performance of a composite parabolic trough pp. 231-239: T.C. Kandpal, S.S. Mathur and A.K. Singhal

Heat exchanger: Optimal separation for vertical rectangular fins protruding from a vertical rectangular base pp. 77-85: C.W. Leung, S.D. Probert and M.J. Shilston
The market for kerojet fuel in the United States pp. 87-96: Noel D. Uri
Designs and performances of flexible and taut sail savonius-type wind-turbines pp. 97-110: P.D. Fleming, S.D. Probert and D. Tanton
Domestic solar water-heating system with a thermal-trap flat-plate solar-energy collector pp. 111-127: Sant Ram, Shiv Singh and N.K. Bansal
Local authority involvement with energy conservation pp. 129-158: Bill Sheldrick

Thermodynamic and thermophysical properties of organic working fluids for Rankine-cycle engines pp. 1-40: O. Badr, P. W. O'Callaghan and S. D. Probert
Thermal behaviour of hollow-cored concrete slabs pp. 41-48: P. Gandhidasan and K. N. Ramamurthy
Modeling the high frequency demand for energy pp. 49-59: Noel D. Uri and Saad A. Hassanein
Heat flux through a Trombe wall/roof pp. 61-71: Sant Ram and H. P. Garg
Optimal insulation of solar hot water tanks pp. 73-75: M. S. Sodha and I. Chrysis

Optimal location of a single horizontal pipeline in a rectangular, horizontal air-filled enclosure to achieve maximum thermal insulation pp. 239-259: R.F. Babus'Haq, S.D. Probert and M.J. Shilston
Lay views of energy conservation in Britain: The significant case of primary school teachers pp. 261-300: Ian Cooper
Use of the thermal-probe technique for the measurement of the apparent thermal conductivities of moist materials pp. 301-317: W.J. Batty, S.D. Probert, M. Ball and P.W. O'Callaghan

The evolution of wind-turbines: An historical review pp. 163-177: P. D. Fleming and S. D. Probert
The heat storage/loss ratio for a building and its response time pp. 179-238: M. G. Davies

Comparison between open and closed solar thermal systems pp. 83-88: Said M.A Ibrahim
Flexible sail wind-turbines: Review of pertinent theoretical analyses pp. 89-99: P.d Fleming and S.d Probert
A passive-heated building for a cool, humid climate in India pp. 101-115: J.K. Nayak, Usha Singh and M.S. Sodha
Apparent thermal conductivities of high-porosity cellular insulants pp. 117-135: W.J. Batty, S.D. Probert and P.W. O'Callaghan
A thermo-electric refrigerator powered by photo-voltaic solar collectors pp. 137-142: H. Sofrata
Convection and radiation in layers of low-density fibrous insulants pp. 143-161: W.J. Batty, S.D. Probert and J.W. Lane

Performances of channel-type flat-plate solar energy air-heaters pp. 1-13: M.M. Sorour and Z.A. Mottaleb
Performances of Rankine-cycle engines as functions of their expanders' efficiencies pp. 15-27: O. Badr, P.W. O'Callaghan and S.D. Probert
Control of photovoltaic dynamic energy stores pp. 29-35: El-Hosseiny Taha El-Shirbeeny
The design of photovoltaic plants: An optimization procedure pp. 37-47: B Bartoli, V Cuomo, F Fontana, C Serio and V Silvestrini
Design of [`]greenhouses': Thermal aspects pp. 49-82: J.G. Hare, B. Norton and S.D. Probert

Passive solar heating of a non-airconditioned building with movable insulation over the roof pond pp. 235-249: S. Chandra, D.D. Kaushik and S.C. Kaushik
Simple LiBr/Water absorption cycle limitations pp. 251-262: Adel E. Nasser and Taj R. Osman
Effects of thermal control and of passive solar elements on the dynamic behaviour of a building pp. 263-282: U. Amato, B. Coluzzi, V. Cuomo, C. Serio and G. Troise
Improving the thermal comfort of sedentary man pp. 283-299: M. Newborough and S.D. Probert
A dynamic gas sampler/analyzer system for geopressured aquifer logging pp. 301-317: Daniel P. Lucero

Testing flat-plate collectors charged with phase-changing fluids pp. 155-168: V.V.N. Kishore, M.R. Gandhi, Ch. Marquis and K.S. Rao
Design optimisation of cheap power-augmentation devices for a flexible-sail, horizontal-axis wind-turbine pp. 169-180: P.D. Fleming, S.D. Probert and S. Arithoppah
Effects of design parameters on the performance of channel-type solar energy air heaters with corrugated plates pp. 181-190: M.M. Sorour and Z.A. Mottaleb
Evaluation of tube enhancement for geothermal power generation heat exchangers pp. 191-215: Wu Zhi-jian and R.F. Boehm
Solar-energy stimulated, open-looped thermosyphonic air heaters pp. 217-234: B. Norton and S.D. Probert

Suggested design improvements concerning district-heating pipeline configurations pp. 77-96: R.F. Babus'Haq, S.D. Probert, M.J. Shilston and A. Talati
Performance characteristics of solar ponds operating at different latitudes pp. 97-115: M.N.A. Hawlader
Stability, effective insulation and heat loss of a salt-gradient solar pond pp. 117-131: R.N. Pande and D.R. Chaudhary
Analysis of flat-plate collectors charged with phase-changing fluids pp. 133-149: V.V.N. Kishore, M.R. Gandhi and K.S. Rao

Energy and condensation problems in buildings pp. 1-14: W. J. Batty, P. W. O'Callaghan and S. D. Probert
The Betz optimum efficiency for windmills pp. 15-23: A. Rauh and W. Seelert
Thermal performance and energy requirements of buildings pp. 25-45: P. J. Walsh
Enhancing heat transfer rates from closed-sided, open-topped heat exchangers, each having vertical rectangular fins extending upwards from a horizontal base pp. 47-75: K. Jambunathan, S. D. Probert and M. J. Shilston