Applied Energy

1975 - 2025

Current editor(s): J. Yan

From Elsevier
Bibliographic data for series maintained by Catherine Liu ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

1981, volume 8, articles 4

Variance of the ground temperature distribution pp. 245-254

M. S. Sodha, N. K. Bansal and A. K. Seth

Thermal design of a roof as an inexpensive solar collector/storage system pp. 255-267

A. Kumar, U. Singh, A. Srivastava and G. N. Tiwari

A high performance solar powered thermoelectric generator pp. 269-273

D. M. Rowe

The coefficient of performance for a solar absorption dual cycle pp. 275-280

Hamed M. Sofrata, Adel E. Nasser and Mohammed R. Megahed

Periodic heat transfer in sunlit moist ground: Evaluation of rates of moisture evaporation pp. 281-290

M. S. Sodha, S. C. Bhardwaj and S. C. Kaushik

Re-inventing the wheel-barrow pp. 291-315

S. D. Probert

1981, volume 8, articles 3

The 1981-1984 automobile fuel economy standards--Can they be achieved? pp. 143-173

Larry R. Gsellman

Performance of trombe walls and roof pond systems pp. 175-191

M. S. Sodha, S. C. Kaushik and J. K. Nayak

Water-vapour diffusion through fibrous thermal insulants pp. 193-204

W. J. Batty, P. W. O'Callaghan, S. D. Probert and S. Gregory

Factors influencing solar energy collector efficiency pp. 205-213

P. K. C. Pillai and R. C. Agarwal

Impact of energy on employment in manufacturing pp. 215-225

Noel D. Uri

Exergy and economics pp. 227-243

P. W. O'Callaghan and S. D. Probert

1981, volume 8, articles 2

Materials for energy conservation and storage pp. 89-142

B.C. Tofield

1981, volume 8, articles 1

Natural and mechanical ventilation rates in a detached house: Measurements pp. 1-18

D.W. Etheridge, L. Martin, R. Gale and M.A. Gell

Supply of appropriate nuclear technology for the developing world: Small power reactors for electricity generation pp. 19-49

C.D. Heising-Goodman

Stages in the transient cooling of a slab pp. 51-65

M.G. Davies

Effect of using a reflecting sheet in an air gap on the thermal performance of hollow walls and roofs pp. 67-78

M.S. Sodha, U. Singh, A. Kumar and G.N. Tiwari

Reducing consumption by cascading energy inputs according to temperature level pp. 79-85

P.W. O'Callaghan and S.D. Probert

1980, volume 7, articles 4

Direct benefits and costs of regulating automobile gas mileage pp. 243-261

Larry R. Gsellman

The relevance of energy analysis in product design pp. 263-279

J. Braam

Efficient pumping of hot liquids through horizontal, internally insulated pipes pp. 281-297

S.D. Probert and C.Y. Chu

Preparation and characterisation of a spectrally selective black chrome coating for solar energy applications pp. 299-303

P.K.C. Pillai and R.C. Agarwal

Periodic theory of an open roof pond pp. 305-319

M.S. Sodha, A. Kumar, U. Singh and G.N. Tiwari

1980, volume 7, articles 1-3

Solar system optimisation pp. 5-17

G. Ambrosone, A. Andretta, F. Bloisi, B. Coluzzi, S. De Stefano, G. Formisano and L. Vicari

Heat storage and solar system performance pp. 19-29

F. Bloisi, S. Catalanotti, V. Cuomo, S. De Stefano and L. Vicari

A regional evaluation of the annual cycle energy system pp. 31-44

J.Ward MacArthur, Dean W. Finn-Carlson and K.H. Nguyen

Solar electricity storage systems pp. 45-66

J. Jensen and C. Perram

Prospects for solar energy for providing low temperature heat pp. 67-81

J.S. van Wieringen

Optimisation of the performance of a spiral solar collector pp. 83-91

P.K.C. Pillai and R.C. Agarwal

Check of a computer program for calculating long-term performance of solar flat-plate collectors pp. 93-108

A. Andretta, G. Barone, P. Brunini, V. Cuomo, M. Francesca, P. Mattarelli and C. Serio

Loss coefficients from solar flat-plate collectors pp. 109-117

H.P. Garg and U. Rani

Long-term performance of flat-plate solar collectors pp. 119-128

G. Ambrosone, A. Andretta, F. Bloisi, S. Catalanotti, V. Cuomo, V. Silvestrini and L. Vicari

Free convection and shading due to gap spacing between an absorber plate and the cover glazing in solar energy flat-plate collectors pp. 129-145

N.M. Nahar and H.P. Garg

Effects of dye on the performance of a solar still pp. 147-162

M.S. Sodha, A. Kumar, G.N. Tiwari and G.C. Pandey

Thermo emf in saline water and its application in solar stills pp. 163-167

G.C. Pandey

Partitioned solar pond collector/storage system pp. 169-190

N.D. Kaushik, P.K. Bansal and M.S. Sodha

Performance of a two-stage solar concentrator pp. 191-199

T.C. Kandpal, S.S. Mathur and R.N. Singh

Performance of a constant flow sand solar collector pp. 201-214

M.S. Sodha, Alok Srivastava, G.N. Tiwari and S.C. Kaushik

Solar space heating using galvanised iron sheet roofs pp. 215-220

S.S. Mathur and A.K. Seth

Use of solar energy for heating asphalt in storage tanks pp. 221-228

J.B. Henderson, J.A. Wiebelt and J.D. Parker

Heating and cooling buildings by flow of water over the roof pp. 229-242

M.S. Sodha, A. Srivastava, A. Kumar and G.N. Tiwari

1980, volume 6, articles 6

Thermal contact resistances for hard machined surfaces pressed against relatively soft optical-flats pp. 405-427

M. J. Edmonds, A. M. Jones and S. D. Probert

Energy saving in building design pp. 429-446

G. Ambrosone, A. Andretta, F. Bloisi, V. Cuomo, S. De Stefano, G. Formisano, V. Silvestrini, L. Vicari and F. Passaro

Response function for transient heat conduction in semi-infinite media pp. 447-453

N. D. Kaushik and Alok Srivastava

Electron mobility in heavily doped, hot pressed silicon germanium alloys pp. 455-462

D. M. Rowe

Reducing energy waste by improved communications pp. 463-475

Douglas Probert, Edward MacAdam and Santanu Chakrabarti

Energy used by electric motors in a papermill pp. 477-482

B. Abbott

1980, volume 6, articles 5

A solar power system (Prometheus) to provide 100 per cent of low-grade heat needs pp. 329-346

Barrie W. Jones

Effect of grain size on the thermoelectric conversion efficiency of semiconductor alloys at high temperature pp. 347-351

D. M. Rowe and C. M. Bhandari

The development of thermal energy storage systems exploiting solid-solid phase transitions pp. 353-362

A. Addeo, L. Nicolais, V. Busico and C. Migliaresi

Pressure loss in a spiral solar energy collector pp. 363-369

P. K. C. Pillai and R. C. Agarwal

Efficiencies of exergy transductions pp. 371-384

Mohey Hussein, R. J. Wood, P. W. O'Callaghan and S. D. Probert

Materials for internally lining pipes pp. 385-393

S. D. Probert and C. Y. Chu

A simulation model for wind turbines pp. 395-399

Henry M. Power

1980, volume 6, articles 4

Methods of calculating engineering parameters for gas separations pp. 241-255

D.D. Lawson

Models for estimating undiscovered oil resources pp. 257-264

Noel D. Uri

Plastic solar collectors for [`]low energy' applications pp. 265-274

A. Addeo, G. Campanile, L. Nicolais and G. Romeo

Interfuel substitution and energy consumption in the industrial sector pp. 275-288

John Kraft and Arthur Kraft

Performance study of an OTEC system pp. 289-299

E.N. Ganic and L. Moeller

Automobile fuel regulations: Direct benefit-cost analysis, 1981-1984 pp. 301-313

Hyder Ali G. Lakhani

Concentration characteristics of composite parabolic concentrators pp. 315-321

R.N. Singh, S.S. Mathur and T.C. Kandpal

Thermal insulation of a low capital cost solar-energy collector pp. 323-327

B. Norton and S.D. Probert

1980, volume 6, articles 3

Feasibility study for a large thermal storage and heat pumping installation pp. 159-169

M. R. Wilson

Surface temperature distributions along vertical recuperator pipes pp. 171-175

K. Jambunathan and S. D. Probert

Thermodynamic analysis of process efficiency pp. 177-201

J. M. Dealy and M. E. Weber

A performance index for thermostatic radiator valves pp. 203-215

P. Weker and J. M. Mineur

Economics of roof design, construction and performance pp. 217-230

S. D. Probert and T. J. Thirst

Policy implications of generalised distributed lags and the estimated demand for petroleum products pp. 231-239

Anthony E. Bopp and Mark Rodekohr

1980, volume 6, articles 2

Design and performance of roofs pp. 79-97

S.D. Probert and T.J. Thirst

A storage tank for vehicular storage of liquid hydrogen pp. 99-112

Laurence O. Williams and Dale E. Spond

Periodic heat transfer through a hollow concrete slab: Optimum placement of the air gap pp. 113-123

M.S. Sodha, A.K. Seth and S.C. Kaushik

Tubular solar collector pp. 125-132

P.K.C. Pillai and R.C. Agarwal

Large energy storage systems for utilities pp. 133-142

S.L. Ridgway, J.L. Dooley and R.Philip Hammond

A low capital and running cost dwelling built by unskilled labour pp. 143-149

David Conn and Douglas Probert

A tricycle design for the future pp. 151-158

S.D. Probert and P.C. Blowers

1980, volume 6, articles 1

Energy accounting of alternative energy sources pp. 1-20

F. Roberts

Aggregation of the UK's energy conservation options pp. 21-48

F. Roberts

Optimal internal lining of pipes to achieve energy conservation pp. 49-62

S. D. Probert and C. Y. Chu

Application of centrifugal separation to the production of hydrogen from coal pp. 63-70

Laurence O. Williams

Energy and materials conservation pp. 71-77

P. W. O'Callaghan and S. D. Probert