Applied Energy

1975 - 2025

Current editor(s): J. Yan

From Elsevier
Bibliographic data for series maintained by Catherine Liu ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

2012, volume 98, articles C

Experimental investigation of hydrogen production through heavy naphtha cracking in pulsed DBD reactor pp. 3-10

Hamed Taghvaei, Meisam Mohamadzadeh Shirazi, Navid Hooshmand, Mohammad Reza Rahimpour and Abdolhossien Jahanmiri

Analysis of energy savings in a supermarket refrigeration/HVAC system pp. 11-21

Ammar Bahman, Luis Rosario and Muhammad M. Rahman

Performance analysis and comparison of concentrated evacuated tube heat pipe solar collectors pp. 22-32

Dan Nchelatebe Nkwetta and Mervyn Smyth

Effect of waste wrapping paper fiber as a “solid bridge” on physical characteristics of biomass pellets made from wood sawdust pp. 33-39

Lingjun Kong, ShuangHong Tian, Chun He, Changming Du, YuTing Tu and Ya Xiong

Attitudes, threshold levels and cumulative effects of the daily wind-turbine encounters pp. 40-46

Jacob Ladenburg and Jens-Olav Dahlgaard

Synthesis of biodiesel from acidified soybean soapstock using a lignin-derived carbonaceous catalyst pp. 47-52

Feng Guo, Zhi-Long Xiu and Zhi-Xia Liang

Effect of CO2 and N2 concentration in acid gas stream on H2S combustion pp. 53-58

H. Selim, A.K. Gupta and A. Al Shoaibi

Combustion performance of 2,5-dimethylfuran blends using dual-injection compared to direct-injection in a SI engine pp. 59-68

Ritchie Daniel, Hongming Xu, Chongming Wang, Dave Richardson and Shijin Shuai

Low calorific value fuelled distributed combustion with swirl for gas turbine applications pp. 69-78

Ahmed E.E. Khalil, Vaibhav K. Arghode, Ashwani K. Gupta and Sang Chun Lee

Analysis of different exhaust gas recirculation architectures for passenger car Diesel engines pp. 79-91

Federico Millo, Paolo Ferrero Giacominetto and Marco Gianoglio Bernardi

One-step synthesis of dimethyl ether from the gas mixture containing CO2 with high space velocity pp. 92-101

Wei-Hsin Chen, Bo-Jhih Lin, How-Ming Lee and Men-Han Huang

Energy conversion strategies in the European paper industry – A case study in three countries pp. 102-113

Jobien Laurijssen, André Faaij and Ernst Worrell

Influence of water vapour and tar compound on laminar flame speed of gasified biomass gas pp. 114-121

Nur Farizan Munajat, Catharina Erlich, Reza Fakhrai and Torsten H. Fransson

Predicting the dynamic and kinematic viscosities of biodiesel–diesel blends using mid- and near-infrared spectroscopy pp. 122-127

Weibo Zhang, Wenqiao Yuan, Xuemin Zhang and Marcelo Coronado

Size matters: Exploring the importance of vessel characteristics to inform estimates of shipping emissions pp. 128-137

Conor Walsh and Alice Bows

Investigation of a solar cooling installation in Tunisia pp. 138-148

M. Balghouthi, M.H. Chahbani and A. Guizani

Multi-objective design of heat-exchanger networks considering several life cycle impacts using a rigorous MILP-based dimensionality reduction technique pp. 149-161

Pavel Vaskan, Gonzalo Guillén-Gosálbez and Laureano Jiménez

New flat-fan sheets adiabatic absorber for direct air-cooled LiBr/H2O absorption machines: Simulation, parametric study and experimental results pp. 162-173

A. González-Gil, M. Izquierdo, J.D. Marcos and E. Palacios

Development and assessment of a new methodology for end of combustion detection and its application to cycle resolved heat release analysis in IC engines pp. 174-189

Mirko Baratta and Daniela Misul

Experimental implementation and validation of thermodynamic cycles of adsorption-based desalination pp. 190-197

Jun W. Wu, Mark J. Biggs, Philip Pendleton, Alexander Badalyan and Eric J. Hu

Efficiency and abatement costs of energy-related CO2 emissions in China: A slacks-based efficiency measure pp. 198-208

Yongrok Choi, Ning Zhang and Peng Zhou

Efficiency considerations for the use of blended biofuel in diesel engines pp. 209-218

B.T. Tompkins, Haiyan Song, J.A. Bittle and T.J. Jacobs

Performance analysis of municipal solid waste gasification with steam in a Plasma Gasification Melting reactor pp. 219-229

Qinglin Zhang, Liran Dor, Lan Zhang, Weihong Yang and Wlodzimierz Blasiak

A microbial fuel cell–membrane bioreactor integrated system for cost-effective wastewater treatment pp. 230-235

Yong-Peng Wang, Xian-Wei Liu, Wen-Wei Li, Feng Li, Yun-Kun Wang, Guo-Ping Sheng, Raymond J. Zeng and Han-Qing Yu

Techno-economic assessment of triticale straw for power generation pp. 236-245

Geekiyanage Disela Malinga Dassanayake and Amit Kumar

Global biofuel production and poverty in China pp. 246-255

Jikun Huang, Jun Yang, Siwa Msangi, Scott Rozelle and Alfons Weersink

Design of a combined cycle power plant model for optimization pp. 256-265

Adrian Tică, Hervé Guéguen, Didier Dumur, Damien Faille and Frans Davelaar

Multi-objective optimization of coal-fired electricity production with CO2 capture pp. 266-272

Jorge Cristóbal, Gonzalo Guillén-Gosálbez, Laureano Jiménez and Angel Irabien

A statistical investigation of biodiesel effects on regulated exhaust emissions during transient cycles pp. 273-291

Evangelos G. Giakoumis

Application of videometric technique to deformation measurement for large-scale composite wind turbine blade pp. 292-300

Jinshui Yang, Chaoyi Peng, Jiayu Xiao, Jingcheng Zeng and Yun Yuan

Analysis of the life-cycle costs and environmental impacts of cooking fuels used in Ghana pp. 301-306

George Afrane and Augustine Ntiamoah

Current status of the traditional watermills of the Himalayan region and the need of technical improvements for increasing their energy efficiency pp. 307-315

A.K. Vashisht

Optimal offering strategy for a concentrating solar power plant pp. 316-325

R. Dominguez, L. Baringo and A.J. Conejo

Performance prediction of absorption refrigeration cycle based on the measurements of vapor pressure and heat capacity of H2O+[DMIM]DMP system pp. 326-332

Li Dong, Danxing Zheng, Nan Nie and Yun Li

Freezing of geothermal borehole surroundings: A numerical and experimental assessment with applications pp. 333-345

Parham Eslami-nejad and Michel Bernier

Relationships between meteorological variables and monthly electricity demand pp. 346-356

Francesco Apadula, Alessandra Bassini, Alberto Elli and Simone Scapin

Regeneration performance of CO2-rich solvents by using membrane vacuum regeneration technology: Relationships between absorbent structure and regeneration efficiency pp. 357-367

Shuiping Yan, Mengxiang Fang, Zhen Wang and Zhongyang Luo

Comparison of the effects of Na2CO3, Ca3(PO4)2, and NiO catalysts on the thermochemical liquefaction of microalga Spirulina platensis pp. 368-375

Umakanta Jena, K.C. Das and J.R. Kastner

Climate change impacts on electricity demand in the State of New South Wales, Australia pp. 376-383

T. Ahmed, K.M. Muttaqi and A.P. Agalgaonkar

Analysis of thermal and electrical performance of a hybrid (PV/T) air based solar collector for Iraq pp. 384-395

Karima E. Amori and Hussein M. Taqi Al-Najjar

Glazing systems with silica aerogel for energy savings in buildings pp. 396-403

C. Buratti and E. Moretti

Possibilities of electricity generation in the Republic of Croatia from medium-temperature geothermal sources pp. 404-414

Zvonimir Guzović, Boris Majcen and Svetislav Cvetković

Comparison of two new ARIMA-ANN and ARIMA-Kalman hybrid methods for wind speed prediction pp. 415-424

Hui Liu, Hong-qi Tian and Yan-fei Li

Application of artificial neural network to predict thermal transmittance of wooden windows pp. 425-432

Cinzia Buratti, Linda Barelli and Elisa Moretti

Growing wastewater-born microalga Auxenochlorella protothecoides UMN280 on concentrated municipal wastewater for simultaneous nutrient removal and energy feedstock production pp. 433-440

Wenguang Zhou, Yecong Li, Min Min, Bing Hu, Hong Zhang, Xiaochen Ma, Liang Li, Yanling Cheng, Paul Chen and Roger Ruan

Development of non-deform micro-encapsulated phase change energy storage tablets pp. 441-447

J. Darkwa, O. Su and T. Zhou

Wet ethanol in HCCI engines with exhaust heat recovery to improve the energy balance of ethanol fuels pp. 448-457

Samveg Saxena, Silvan Schneider, Salvador Aceves and Robert Dibble

The potential role of data-centres in enabling investment in geothermal energy pp. 458-466

Ashok A. Kaniyal, Graham J. Nathan and Jonathan Pincus

Monte-Carlo simulation of investment integrity and value for power-plants with carbon-capture pp. 467-478

Giuseppina Di Lorenzo, Pericles Pilidis, John Witton and Douglas Probert

An integrated optimization approach for a hybrid energy system in electric vehicles pp. 479-490

Yi-Hsuan Hung and Chien-Hsun Wu

Evaluation of Stirling cooler system for cryogenic CO2 capture pp. 491-501

Chun Feng Song, Yutaka Kitamura and Shu Hong Li

The economic performance of combined heat and power from biogas produced from manure in Sweden – A comparison of different CHP technologies pp. 502-511

Mikael Lantz

Computational methods for performance analysis of horizontal axis tidal stream turbines pp. 512-523

Ju Hyun Lee, Sunho Park, Dong Hwan Kim, Shin Hyung Rhee and Moon-Chan Kim

Empiric model for the prediction of packaging waste pyrolysis yields pp. 524-532

A. Lopez-Urionabarrenechea, I. de Marco, B.M. Caballero, A. Adrados and M.F. Laresgoiti

Procurement of interruptible load services in electricity supply systems pp. 533-539

G.K. Toh and H.B. Gooi

Integration of extraction and transesterification of lipid from jatropha seeds for the production of biodiesel pp. 540-547

Shuang Lian, Huijuan Li, Jinqiang Tang, Dongmei Tong and Changwei Hu

Improving bioethanol production – Comparison between extractive and low temperature fermentation pp. 548-555

M.O.S. Dias, T.L. Junqueira, C.D.F. Jesus, C.E.V. Rossell, R. Maciel Filho and A. Bonomi

A pre-industrial magnetic cooling system for room temperature application pp. 556-561

M. Balli, O. Sari, C. Mahmed, Ch. Besson, Ph. Bonhote, D. Duc and J. Forchelet

A new design method for Organic Rankine Cycles with constraint of inlet and outlet heat carrier fluid temperatures coupling with the heat source pp. 562-573

Qicheng Chen, Jinliang Xu and Hongxia Chen

Monitoring of wind farms’ power curves using machine learning techniques pp. 574-583

Antonino Marvuglia and Antonio Messineo

Effect of thermal bridges on transmission loads and thermal resistance of building walls under dynamic conditions pp. 584-593

Sami A. Al-Sanea and M.F. Zedan

A white-rot fungus is used as a biocathode to improve electricity production of a microbial fuel cell pp. 594-596

Chao Wu, Xian-Wei Liu, Wen-Wei Li, Guo-Ping Sheng, Guo-Long Zang, Yuan-Yuan Cheng, Nan Shen, Yi-Pei Yang and Han-Qing Yu

Diagnosis of the low temperature difference syndrome in the chilled water system of a super high-rise building: A case study pp. 597-606

Dian-ce Gao, Shengwei Wang, Yongjun Sun and Fu Xiao