Applied Energy

1975 - 2025

Current editor(s): J. Yan

From Elsevier
Bibliographic data for series maintained by Catherine Liu (repec@elsevier.com).

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

2014, volume 118, articles C

A bankable method of assessing the performance of a CPV plant pp. 1-11

Jonathan Leloux, Eduardo Lorenzo, Beatriz García-Domingo, Jorge Aguilera and Christian A. Gueymard

Chemical-photo-electricity diagrams by Ohm’s law – A case study of Ni-doped TiO2 solutions in dye-sensitized solar cells pp. 12-21

Chuen-Shii Chou, Yan-Hao Huang, Ping Wu and Yi-Ting Kuo

Spark-ignited engine NOx emissions in a low-nitrogen oxycombustion environment pp. 22-31

Andrew Van Blarigan, Darko Kozarac, Reinhard Seiser, J.Y. Chen, Robert Cattolica and Robert Dibble

Biotemplated synthesis of highly stable calcium-based sorbents for CO2 capture via a precipitation method pp. 32-40

Thongthai Witoon, Thumrongrut Mungcharoen and Jumras Limtrakul

Performance of synthetic jet fuels in a meso-scale heat recirculating combustor pp. 41-47

Teresa A. Wierzbicki, Ivan C. Lee and Ashwani K. Gupta

Large scale hydrogen production from wind energy for the upgrading of bitumen from oil sands pp. 48-56

Babatunde Olateju, Joshua Monds and Amit Kumar

Effects of heat and electricity saving measures in district-heated multistory residential buildings pp. 57-67

Nguyen Le Truong, Ambrose Dodoo and Leif Gustavsson

Life cycle analysis on carbon emissions from power generation – The nuclear energy example pp. 68-82

Victor Nian, S.K. Chou, Bin Su and John Bauly

The compatibility of potential bioderived fuels with Jet A-1 aviation kerosene pp. 83-91

Christopher J. Chuck and Joseph Donnelly

Nanosilica supported CaO: A regenerable and mechanically hard CO2 sorbent at Ca-looping conditions pp. 92-99

P.E. Sanchez-Jimenez, L.A. Perez-Maqueda and J.M. Valverde

Experimental study of the relationship between injection rate shape and Diesel ignition using a novel piezo-actuated direct-acting injector pp. 100-113

Vicente Macian, Raul Payri, Santiago Ruiz, Michele Bardi and Alejandro H. Plazas

A naive Bayes model for robust remaining useful life prediction of lithium-ion battery pp. 114-123

Selina S.Y. Ng, Yinjiao Xing and Kwok L. Tsui

Optimum sizing and tracking of combined cooling heating and power systems for bulk energy consumers pp. 124-134

Saliya Jayasekara, Saman K. Halgamuge, Rahula A. Attalage and Rohitha Rajarathne

Performance and emission characteristics of butanol/Jet A blends in a gas turbine engine pp. 135-140

C.J. Mendez, R.N. Parthasarathy and S.R. Gollahalli

Wind power bidding in electricity markets with high wind penetration pp. 141-155

Michael Vilim and Audun Botterud

Design and optimization of air bottoming cycles for waste heat recovery in off-shore platforms pp. 156-165

Leonardo Pierobon and Fredrik Haglind

Accurate simulation of thermoelectric power generating systems pp. 166-172

Andrea Montecucco and Andrew R. Knox

Emergy analysis of a biogas-linked agricultural system in rural China – A case study in Gongcheng Yao Autonomous County pp. 173-182

Jin Yang and Bin Chen

Polymer electrolyte membrane with high selectivity ratio for direct methanol fuel cells: A preliminary study based on blends of partially sulfonated polymers polyaniline and PVdF-co-HFP pp. 183-191

Kingshuk Dutta, Suparna Das, Piyush Kumar and Patit Paban Kundu

Constrained control framework for a stand-alone hybrid (Stirling engine)/supercapacitor power generation system pp. 192-206

M. Alamir, M.A. Rahmani and D. Gualino

A framework to characterize energy efficiency measures pp. 207-220

Andrea Trianni, Enrico Cagno and Alessio De Donatis

China’s solar photovoltaic industry development: The status quo, problems and approaches pp. 221-230

Honghang Sun, Qiang Zhi, Yibo Wang, Qiang Yao and Jun Su

Solar energy conversion and storage: Fast Green FCF-Fructose photogalvanic cell pp. 231-237

Pooran Koli

Evaluation of working fluids for geothermal power generation from abandoned oil wells pp. 238-245

Wen-Long Cheng, Tong-Tong Li, Yong-Le Nian and Kun Xie

H2 coproduction in IGCC with CCS via coal and biomass mixture using advanced technologies pp. 258-270

Qin Chen, Ashok Rao and Scott Samuelsen

Evaluation of power investment decisions under uncertain carbon policy: A case study for converting coal fired steam turbine to combined cycle gas turbine plants in Australia pp. 271-279

Mahdi Shahnazari, Adam McHugh, Bryan Maybee and Jonathan Whale

Renewable energy projects to electrify rural communities in Cape Verde pp. 280-291

Matteo Ranaboldo, Bruno Domenech Lega, David Vilar Ferrenbach, Laia Ferrer-Martí, Rafael Pastor Moreno and Alberto García-Villoria

Thermodynamic equipartition for increased second law efficiency pp. 292-299

Gregory P. Thiel, Ronan K. McGovern, Syed M. Zubair and John H. Lienhard V

Conversion of metallurgical coke and coal using a Coal Direct Chemical Looping (CDCL) moving bed reactor pp. 300-308

Siwei Luo, Samuel Bayham, Liang Zeng, Omar McGiveron, Elena Chung, Ankita Majumder and Liang-Shih Fan

Operational experience with a system of coupled fluidized beds for chemical looping combustion of solid fuels using ilmenite as oxygen carrier pp. 309-317

Andreas Thon, Marvin Kramp, Ernst-Ulrich Hartge, Stefan Heinrich and Joachim Werther

2014, volume 117, articles C

Understanding the expected performance of large-scale solar ponds from laboratory-scale observations and numerical modeling pp. 1-10

Francisco Suárez, Jeffrey A. Ruskowitz, Amy E. Childress and Scott W. Tyler

Systematic optimization of subcritical and transcritical organic Rankine cycles (ORCs) constrained by technical parameters in multiple applications pp. 11-29

Daniel Maraver, Javier Royo, Vincent Lemort and Sylvain Quoilin

Experimental evaluation and ANN modeling of a recuperative micro gas turbine burning mixtures of natural gas and biogas pp. 30-41

H. Nikpey, M. Assadi, P. Breuhaus and P.T. Mørkved

Feasibility analysis of offshore renewables penetrating local energy systems in remote oceanic areas – A case study of emissions from an electricity system with tidal power in Southern Alaska pp. 42-53

Ye Li and Lindsay Willman

Energy analysis of thermal energy storages with grid configurations pp. 54-61

Behnaz Rezaie, Bale V. Reddy and Marc A. Rosen

Prospects of carbon capture and storage (CCS) in India’s power sector – An integrated assessment pp. 62-75

Peter Viebahn, Daniel Vallentin and Samuel Höller

Novel combined cycle configurations for propane pre-cooled mixed refrigerant (APCI) natural gas liquefaction cycle pp. 76-86

Amir Mortazavi, Abdullah Alabdulkarem, Yunho Hwang and Reinhard Radermacher

Thermophilic anaerobic co-digestion of sewage sludge with grease waste: Effect of long chain fatty acids in the methane yield and its dewatering properties pp. 87-94

G. Silvestre, J. Illa, B. Fernández and A. Bonmatí

A study on the use of phase change materials (PCMs) in combination with a natural cold source for space cooling in telecommunications base stations (TBSs) in China pp. 95-103

Xiaoqin Sun, Quan Zhang, Mario A. Medina, Yingjun Liu and Shuguang Liao

Low temperature spray combustion of acetone–butanol–ethanol (ABE) and diesel blends pp. 104-115

Nan Zhou, Ming Huo, Han Wu, Karthik Nithyanandan, Chia-fon F. Lee and Qingnian Wang

WRF wind simulation and wind energy production estimates forced by different reanalyses: Comparison with observed data for Portugal pp. 116-126

D. Carvalho, A. Rocha, M. Gómez-Gesteira and C. Silva Santos

Dynamic study of methanol adsorption on activated carbon ACM-35.4 for enhancing the specific cooling power of adsorptive chillers pp. 127-133

Larisa Gordeeva and Yuri Aristov

An assessment of regulated emissions and CO2 emissions from a European light-duty CNG-fueled vehicle in the context of Euro 6 emissions regulations pp. 134-141

Piotr Bielaczyc, Joseph Woodburn and Andrzej Szczotka

Bioconversion of different sizes of microcrystalline cellulose pretreated by microwave irradiation with/without NaOH pp. 142-148

Huadong Peng, Hongzhang Chen, Yongshui Qu, Hongqiang Li and Jian Xu

Interaction between urban microclimate and electric air-conditioning energy consumption during high temperature season pp. 149-156

Canbing Li, Jinju Zhou, Yijia Cao, Jin Zhong, Yu Liu, Chongqing Kang and Yi Tan

A new approach for real time voltage control using demand response in an automated distribution system pp. 157-166

Alireza Zakariazadeh, Omid Homaee, Shahram Jadid and Pierluigi Siano

Optimum insulation thickness for external walls on different orientations considering the speed and direction of the wind pp. 167-175

Ioannis Axaopoulos, Petros Axaopoulos and John Gelegenis

2014, volume 116, articles C

Forest biomass supply chains in Ireland: A life cycle assessment of GHG emissions and primary energy balances pp. 1-8

Fionnuala Murphy, Ger Devlin and Kevin McDonnell

Energy performance enhancement in multistory residential buildings pp. 9-19

Caroline Hachem, Andreas Athienitis and Paul Fazio

Transforming duck tallow into biodiesel via noncatalytic transesterification pp. 20-25

Eilhann E. Kwon, Eui-Chan Jeon, Haakrho Yi and Sungpyo Kim

Hydrate-based technology for CO2 capture from fossil fuel power plants pp. 26-40

Mingjun Yang, Yongchen Song, Lanlan Jiang, Yuechao Zhao, Xuke Ruan, Yi Zhang and Shanrong Wang

Methods to achieve HCCI/CAI combustion at idle operation in a 4VVAS gasoline engine pp. 41-51

Tao Chen, Hui Xie, Le Li, Lianfang Zhang, Xinyan Wang and Hua Zhao

Near Infrared Reflectance Spectroscopy (NIRS) for rapid determination of biochemical methane potential of plant biomass pp. 52-57

Jin M. Triolo, Alastair J. Ward, Lene Pedersen, Mette M. Løkke, Haiyan Qu and Sven G. Sommer

Blending lignin-derived oxygenate in enhanced multi-component diesel fuel for improved emissions pp. 58-65

J.M. Herreros, A. Jones, E. Sukjit and A. Tsolakis

Solar energy captured by a curved collector designed for architectural integration pp. 66-75

D. Rodríguez-Sánchez, J.F. Belmonte, M.A. Izquierdo-Barrientos, A.E. Molina, G. Rosengarten and J.A. Almendros-Ibáñez

Optimization of operating parameters of ground source heat pump system for space heating and cooling by Taguchi method and utility concept pp. 76-85

T. Sivasakthivel, K. Murugesan and H.R. Thomas

Light intensity affects the performance of photo microbial fuel cells with Desmodesmus sp. A8 as cathodic microorganism pp. 86-90

Yi-cheng Wu, Ze-jie Wang, Yue Zheng, Yong Xiao, Zhao-hui Yang and Feng Zhao

Conceptual design of offshore platform supply vessel based on hybrid diesel generator-fuel cell power plant pp. 91-100

Maria C. Díaz-de-Baldasano, Francisco J. Mateos, Luis R. Núñez-Rivas and Teresa J. Leo

Combination of CO2 geological storage with deep saline water recovery in western China: Insights from numerical analyses pp. 101-110

Qi Li, Ya-Ni Wei, Guizhen Liu and Qing Lin

A numerical investigation into the influence of unsteady wind on the performance and aerodynamics of a vertical axis wind turbine pp. 111-124

Louis Angelo Danao, Jonathan Edwards, Okeoghene Eboibi and Robert Howell

Techno-economic study of NMMO pretreatment and biogas production from forest residues pp. 125-133

Anna Teghammar, Gergely Forgács, Ilona Sárvári Horváth and Mohammad J. Taherzadeh

Annual evaluation of energy, environmental and economic performances of a membrane liquid desiccant air conditioning system with/without ERV pp. 134-148

Ahmed H. Abdel-Salam and Carey J. Simonson

Individual decisions and system development – Integrating modelling approaches for the heating market pp. 149-158

Klaas Bauermann, Stephan Spiecker and Christoph Weber

Influence of the receiver’s back surface radiative characteristics on the performance of a heat-pipe evacuated-tube solar collector pp. 159-166

Hongfei Zheng, Jianying Xiong, Yuehong Su and Haiyin Zhang

Tidal stream energy impact on the transient and residual flow in an estuary: A 3D analysis pp. 167-177

M. Sánchez, R. Carballo, V. Ramos and G. Iglesias

Review of fuel oil quality and combustion of fast pyrolysis bio-oils from lignocellulosic biomass pp. 178-190

Jani Lehto, Anja Oasmaa, Yrjö Solantausta, Matti Kytö and David Chiaramonti

Biodiesel production via esterification of oleic acid catalyzed by chlorosulfonic acid modified zirconia pp. 191-198

Yue Zhang, Wing-Tak Wong and Ka-Fu Yung

Production of renewable diesel via catalytic deoxygenation of natural triglycerides: Comprehensive understanding of reaction intermediates and hydrocarbons pp. 199-205

Seok Ki Kim, Jae Young Han, Hong-shik Lee, Taewoo Yum, Yunje Kim and Jaehoon Kim

Effects of gaseous ammonia direct injection on performance characteristics of a spark-ignition engine pp. 206-215

Kyunghyun Ryu, George E. Zacharakis-Jutz and Song-Charng Kong

Nanomodification of the electrodes in microbial fuel cell: Impact of nanoparticle density on electricity production and microbial community pp. 216-222

Alatraktchi, Fatima AlZahra’a, Yifeng Zhang and Irini Angelidaki

Two-stage medium chain fatty acid (MCFA) production from municipal solid waste and ethanol pp. 223-229

T.I.M. Grootscholten, D.P.B.T.B. Strik, K.J.J. Steinbusch, C.J.N. Buisman and H.V.M. Hamelers

A probability constrained multi-objective optimization model for CCHP system operation decision support pp. 230-242

Mengqi Hu and Heejin Cho

The melting process of storage materials with relatively high phase change temperatures in partially filled spherical shells pp. 243-252

Antonio Ramos Archibold, José Gonzalez-Aguilar, Muhammad M. Rahman, D. Yogi Goswami, Manuel Romero and Elias K. Stefanakos

Internalizing land use impacts for life cycle cost analysis of energy systems: A case of California’s photovoltaic implementation pp. 253-259

Raksha Lakhani, Ganesh Doluweera and Joule Bergerson

Optimum design of a radial heat sink with a fin-height profile for high-power LED lighting applications pp. 260-268

Daeseok Jang, Se-Jin Yook and Kwan-Soo Lee

Optimal operating conditions for wet ethanol in a HCCI engine using exhaust gas heat recovery pp. 269-277

Samveg Saxena, David Vuilleumier, Darko Kozarac, Martin Krieck, Robert Dibble and Salvador Aceves

Latent heat augmentation of thermocline energy storage for concentrating solar power – A system-level assessment pp. 278-287

Scott M. Flueckiger and Suresh V. Garimella

Effect of inlet and outlet configurations on blow-off and flashback with premixed combustion for methane and a high hydrogen content fuel in a generic swirl burner pp. 288-296

N. Syred, A. Giles, J. Lewis, M. Abdulsada, A. Valera Medina, R. Marsh, P.J. Bowen and A.J. Griffiths

An interactive building power demand management strategy for facilitating smart grid optimization pp. 297-310

Xue Xue, Shengwei Wang, Yongjun Sun and Fu Xiao

The effect of weather forecast uncertainty on a predictive control concept for building systems operation pp. 311-321

Steffen Petersen and Katrine Wieck Bundgaard

A new method for controlling the ignition state of a regenerative combustor using a heat storage device pp. 322-332

Pablo Marín, Fernando V. Díez and Salvador Ordóñez

Impacts of intermittent sources on the quality of power supply: The key role of reliability indicators pp. 333-343

Mathilde Drouineau, Nadia Maïzi and Vincent Mazauric

Introducing carbon taxes in South Africa pp. 344-354

Theresa Alton, Channing Arndt, Rob Davies, Faaiqa Hartley, Konstantin Makrelov, James Thurlow and Dumebi Ubogu

Vacuum insulation panel products: A state-of-the-art review and future research pathways pp. 355-375

Simen Edsjø Kalnæs and Bjørn Petter Jelle

How does individual low-carbon consumption behavior occur? – An analysis based on attitude process pp. 376-386

Hong Chen, Ruyin Long, Wenjing Niu, Qun Feng and Ranran Yang

Heat recovery opportunities in UK industry pp. 387-397

G.P. Hammond and J.B. Norman

Employing two novel mechanical fault ride through controllers for keeping stability of fixed speed wind generation systems hosted by standalone micro-grid pp. 398-408

Rashad M. Kamel

The pressure effects on two-phase anaerobic digestion pp. 409-415

Yuling Chen, Benjamin Rößler, Simon Zielonka, Andreas Lemmer, Anna-Maria Wonneberger and Thomas Jungbluth

Measurement and modeling of decomposition kinetics for copper oxide-based chemical looping with oxygen uncoupling pp. 416-423

Christopher K. Clayton and Kevin J. Whitty

Research and application of active hollow core slabs in building systems for utilizing low energy sources pp. 424-435

Xinhua Xu, Jinghua Yu, Shengwei Wang and Jinbo Wang