Applied Energy

1975 - 2025

Current editor(s): J. Yan

From Elsevier
Bibliographic data for series maintained by Catherine Liu ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

2013, volume 107, articles C

An optimization model for natural gas supply portfolios of a power generation company pp. 1-9

Panida Jirutitijaroen, Sujin Kim, Oran Kittithreerapronchai and José Prina

Evaluation of Overall Thermal Transfer Value (OTTV) for commercial buildings constructed with green roof pp. 10-24

A.L.S. Chan and T.T. Chow

Configuration effects of natural gas fired multi-pair regenerative burners in a flameless oxidation furnace on efficiency and emissions pp. 25-32

E.-S. Cho, D. Shin, Jie Lu, W. de Jong and D.J.E.M. Roekaerts

Fulfilling the electricity demand of electric vehicles in the long term future: An evaluation of centralized and decentralized power supply systems pp. 33-51

Anne Sjoerd Brouwer, Takeshi Kuramochi, Machteld van den Broek and André Faaij

Soot temperature and KL factor for biodiesel and diesel spray combustion in a constant volume combustion chamber pp. 52-65

Ji Zhang, Wei Jing, William L. Roberts and Tiegang Fang

Technological drivers in data centers and telecom systems: Multiscale thermal, electrical, and energy management pp. 66-80

Suresh V. Garimella, Tim Persoons, Justin Weibel and Lian-Tuu Yeh

HC and CO emissions reduction by early injection strategy in a bioethanol blended diesel-fueled engine with a narrow angle injection system pp. 81-88

Su Han Park, Seung Hyun Yoon and Chang Sik Lee

Theoretical and experimental investigation on a thermoelectric cooling and heating system driven by solar pp. 89-97

Wei He, Jinzhi Zhou, Jingxin Hou, Chi Chen and Jie Ji

Optimization of process integration in a Kraft pulp and paper mill – Evaporation train and CHP system pp. 98-110

Sennai Mesfun and Andrea Toffolo

Interaction of iron–copper mixed metal oxide oxygen carriers with simulated synthesis gas derived from steam gasification of coal pp. 111-123

Ranjani V. Siriwardane, Ewelina Ksepko, Hanjing Tian, James Poston, Thomas Simonyi and Marek Sciazko

Energetic and environmental performance of three biomass upgrading processes integrated with a CHP plant pp. 124-134

Thomas Kohl, Timo Laukkanen, Mika Järvinen and Carl-Johan Fogelholm

The application of soft computing methods for MPPT of PV system: A technological and status review pp. 135-148

Zainal Salam, Jubaer Ahmed and Benny S. Merugu

Towards biofuel combustion with an easily extruded clay as a natural catalyst pp. 149-156

Zhen-Yu Tian, Tarik Chafik, Mhamed Assebban, Sanae Harti, Naoufal Bahlawane, Patrick Mountapmbeme Kouotou and Katharina Kohse-Höinghaus

Economic and environmental analysis of a trigeneration system for food-industry: A case study pp. 157-172

F. Freschi, L. Giaccone, P. Lazzeroni and M. Repetto

A study of the pyrolysis behaviors of pelletized recovered municipal solid waste fuels pp. 173-182

Chunguang Zhou, Qinglin Zhang, Leonie Arnold, Weihong Yang and Wlodzimierz Blasiak

Impact of alternative fuels on performance and pollutant emissions of a light duty engine tested under the new European driving cycle pp. 183-190

Octavio Armas, Reyes García-Contreras and Ángel Ramos

Forecasting models for wind speed using wavelet, wavelet packet, time series and Artificial Neural Networks pp. 191-208

Hui Liu, Hong-qi Tian, Di-fu Pan and Yan-fei Li

Prospects for arable farm uptake of Short Rotation Coppice willow and miscanthus in England pp. 209-218

Neryssa J. Glithero, Paul Wilson and Stephen J. Ramsden

Numerical analysis of an organic Rankine cycle under steady and variable heat input pp. 219-228

Musbaudeen O. Bamgbopa and Eray Uzgoren

A building thermal bridges sensitivity analysis pp. 229-243

Alfonso Capozzoli, Alice Gorrino and Vincenzo Corrado

Multiple process integrations for broad perspective analysis of fermentative H2 production from wastewater treatment: Technical and environmental considerations pp. 244-254

G. Mohanakrishna and S. Venkata Mohan

Development of an effective acidogenically digested swine manure-based algal system for improved wastewater treatment and biofuel and feed production pp. 255-263

Bing Hu, Wenguang Zhou, Min Min, Zhenyi Du, Paul Chen, Xiaochen Ma, Yuhuan Liu, Hanwu Lei, Jian Shi and Roger Ruan

Vacuum-assisted drying of polymer electrolyte membrane fuel cell pp. 264-270

Hong-Yue Tang, Anthony D. Santamaria, John Bachman and Jae Wan Park

A comparison between the ECMWF and COSMO Ensemble Prediction Systems applied to short-term wind power forecasting on real data pp. 271-280

S. Alessandrini, S. Sperati and P. Pinson

Practical process design for in situ gasification of bitumen pp. 281-296

Punitkumar R. Kapadia, Wang, Jingyi (Jacky), Michael S. Kallos and Ian D. Gates

SiC foam monolith catalyst for pressurized adiabatic methane reforming pp. 297-303

Chunlin Li, Hengyong Xu, Shoufu Hou, Jian Sun, Fanqiong Meng, Junguo Ma and Noritatsu Tsubaki

Influence of EGR and oxygen-enriched air on diesel engine NO–Smoke emission and combustion characteristic pp. 304-314

Wei Zhang, Zhaohui Chen, Weidong Li, Gequn Shu, Biao Xu and Yinggang Shen

Exergy and economic analyses of advanced IGCC–CCS and IGFC–CCS power plants pp. 315-328

Nicholas S. Siefert and Shawn Litster

Life cycle modeling of energy matrix scenarios, Belgian power and partial heat mixes as case study pp. 329-337

M.A. Rubio Rodríguez, M. Feitó Cespón, J. De Ruyck, V.S. Ocaña Guevara and V.K. Verma

Considering start-ups and shutdowns using an optimisation tool – Including a dairy production planning case study pp. 338-349

Magnus Karlsson and Nawzad Mardan

Investigations on the influence of aquifers on the ground temperature in ground-source heat pump operation pp. 350-363

Antonio Capozza, Michele De Carli and Angelo Zarrella

The effect of diurnal profile and seasonal wind regime on sizing grid-connected and off-grid wind power plants pp. 364-376

Roberto Carapellucci and Lorena Giordano

Low CO2 selective iron based Fischer–Tropsch catalysts for coal based polygeneration pp. 377-383

Olusola O. James, Biswajit Chowdhury, Aline Auroux and Sudip Maity

Estimating the daily global solar radiation spatial distribution from diurnal temperature ranges over the Tibetan Plateau in China pp. 384-393

Tao Pan, Shaohong Wu, Erfu Dai and Yujie Liu

Speculative trading and WTI crude oil futures price movement: An empirical analysis pp. 394-402

Yue-Jun Zhang

An experimental investigation into the influence of unsteady wind on the performance of a vertical axis wind turbine pp. 403-411

Louis Angelo Danao, Okeoghene Eboibi and Robert Howell

A hybrid tool to combine multi-objective optimization and multi-criterion decision making in designing standalone hybrid energy systems pp. 412-425

A.T.D. Perera, R.A. Attalage, K.K.C.K. Perera and V.P.C. Dassanayake

Numerical simulation of wind flow around a parabolic trough solar collector pp. 426-437

A.A. Hachicha, I. Rodríguez, J. Castro and A. Oliva

Co-digestion of used oils and urban landfill leachates with sewage sludge and the effect on the biogas production pp. 438-445

L. Pastor, L. Ruiz, A. Pascual and B. Ruiz

Simulation on the effect of the combustion parameters on the piston dynamics and engine performance using the Wiebe function in a free piston engine pp. 446-455

Jaeheun Kim, Choongsik Bae and Gangchul Kim

Geodemographic analysis and estimation of early plug-in hybrid electric vehicle adoption pp. 456-464

Jukka Saarenpää, Mikko Kolehmainen and Harri Niska

A highly resolved modeling technique to simulate residential power demand pp. 465-473

Matteo Muratori, Matthew C. Roberts, Ramteen Sioshansi, Vincenzo Marano and Giorgio Rizzoni

2013, volume 106, articles C

Thermo-acoustic behavior of a swirl stabilized diffusion flame with heterogeneous sensors pp. 1-16

A.V. Singh, M. Yu, A.K. Gupta and K.M. Bryden

Temporal and spatial trends of residential energy consumption and air pollutant emissions in China pp. 17-24

Dan Zhu, Shu Tao, Rong Wang, Huizhong Shen, Ye Huang, Guofeng Shen, Bin Wang, Wei Li, Yanyan Zhang, Han Chen, Yuanchen Chen, Junfeng Liu, Bengang Li, Xilong Wang and Wenxin Liu

A nano-graphite/paraffin phase change material with high thermal conductivity pp. 25-30

Min Li

Wave power variability over the northwest European shelf seas pp. 31-46

Simon P. Neill and M. Reza Hashemi

Daily heat load variations in Swedish district heating systems pp. 47-55

Henrik Gadd and Sven Werner

A resorption cycle for the cogeneration of electricity and refrigeration pp. 56-64

Liwei Wang, Felix Ziegler, Anthony Paul Roskilly, Ruzhu Wang and Yaodong Wang

Examining the impact factors of energy-related CO2 emissions using the STIRPAT model in Guangdong Province, China pp. 65-71

Ping Wang, Wanshui Wu, Bangzhu Zhu and Yi-Ming Wei

On the importance of the location of PCMs in building walls for enhanced thermal performance pp. 72-78

Xing Jin, Mario A. Medina and Xiaosong Zhang

Optimal design of thermoelectric devices with dimensional analysis pp. 79-88

HoSung Lee

Multi-step-ahead prediction of NOx emissions for a coal-based boiler pp. 89-99

J. Smrekar, P. Potočnik and A. Senegačnik

Economic appraisal of shale gas plays in Continental Europe pp. 100-115

Ruud Weijermars

Performance assessment of producing Mg(OH)2 for CO2 mineral sequestration pp. 116-126

Experience Nduagu, Inês Romão, Johan Fagerlund and Ron Zevenhoven

Analysis and sizing of thermal energy storage in combined heating, cooling and power plants for buildings pp. 127-142

S. Martínez-Lera, J. Ballester and J. Martínez-Lera

A review on carbon dioxide capture and storage technology using coal fly ash pp. 143-151

Jung-Ho Wee

Study liquid length penetration results obtained with a direct acting piezo electric injector pp. 152-162

Raul Payri, Jaime Gimeno, Michele Bardi and Alejandro H. Plazas

Breakthrough fuel cell technology using ceria-based multi-functional nanocomposites pp. 163-175

Bin Zhu, Liangdong Fan and Peter Lund

A One-compartment direct glucose alkaline fuel cell with methyl viologen as electron mediator pp. 176-183

Xianhua Liu, Miaoqing Hao, Mengnan Feng, Lin Zhang, Yong Zhao, Xiwen Du and Guangyi Wang

Numerical study on the combustion and emission characteristics of a methanol/diesel reactivity controlled compression ignition (RCCI) engine pp. 184-197

Yaopeng Li, Ming Jia, Yaodong Liu and Maozhao Xie

Biodiesel production and comparison of emissions of a DI diesel engine fueled by biodiesel–diesel and canola oil–diesel blends at high idling operations pp. 198-208

Murari Mohon Roy, Wilson Wang and Justin Bujold

Occupancy-based zone-climate control for energy-efficient buildings: Complexity vs. performance pp. 209-221

Siddharth Goyal, Herbert A. Ingley and Prabir Barooah

An experimental study of a floating breakwater with asymmetric pneumatic chambers for wave energy extraction pp. 222-231

Fang He, Zhenhua Huang and Adrian Wing-Keung Law

Mathematical modeling and experimental verification of an absorption chiller including three dimensional temperature and concentration distributions pp. 232-242

Saliya Jayasekara and Saman K. Halgamuge

Mixtures of SF6–CO2 as working fluids for geothermal power plants pp. 243-253

Hebi Yin, Adrian S. Sabau, James C. Conklin, Joanna McFarlane and A. Lou Qualls

Experimental study on combustion and NOx emissions for a down-fired supercritical boiler with multiple-injection multiple-staging technology without overfire air pp. 254-261

Min Kuang, Zhengqi Li, Chunlong Liu and Qunyi Zhu

Techno-economic assessment of carbon-negative algal biodiesel for transport solutions pp. 262-274

Benjamin Taylor, Ning Xiao, Janusz Sikorski, Minloon Yong, Tom Harris, Tim Helme, Andrew Smallbone, Amit Bhave and Markus Kraft

Frequency based approach for simulating pressure waves at the inlet of internal combustion engines using a parameterized model pp. 275-286

Haitham Mezher, David Chalet, Jérôme Migaud and Pascal Chesse

Modeling and co-simulation of a parabolic trough solar plant for industrial process heat pp. 287-300

R. Silva, M. Pérez and A. Fernández-Garcia

A sandwich structured membrane for direct methanol fuel cells operating with neat methanol pp. 301-306

Q.X. Wu, T.S. Zhao, R. Chen and L. An

Energy efficiency and capacity retention of Ni–MH batteries for storage applications pp. 307-313

Wenhua H. Zhu, Ying Zhu, Zenda Davis and Bruce J. Tatarchuk

Energy consumption feedback devices’ impact evaluation on domestic energy use pp. 314-320

Iana Vassileva, Erik Dahlquist, Fredrik Wallin and Javier Campillo

Preparation of a novel PEG composite with halogen-free flame retardant supporting matrix for thermal energy storage application pp. 321-327

Yong Qian, Ping Wei, Pingkai Jiang, Zhi Li, Yonggang Yan and Jiping Liu

Investigation of selective catalytic reduction for control of nitrogen oxides in full-scale dairy energy production pp. 328-336

Mary Kay Camarillo, William T. Stringfellow, Jeremy S. Hanlon and Kyle A. Watson

Modelling of a two-phase thermofluidic oscillator for low-grade heat utilisation: Accounting for irreversible thermal losses pp. 337-354

Roochi Solanki, Richard Mathie, Amparo Galindo and Christos N. Markides

Bottoming organic Rankine cycle for a small scale gas turbine: A comparison of different solutions pp. 355-364

Stefano Clemente, Diego Micheli, Mauro Reini and Rodolfo Taccani

Experimental evaluation of a real time energy management system for stand-alone microgrids in day-ahead markets pp. 365-376

Mousa Marzband, Andreas Sumper, Albert Ruiz-Álvarez, José Luis Domínguez-García and Bogdan Tomoiaga

A traveling-wave thermoacoustic electric generator with a variable electric R-C load pp. 377-382

D.M. Sun, Kuan Min Wang, X.J. Zhang, Y.N. Guo, Y. Xu and L.M. Qiu

New hybrid absorption–compression refrigeration system based on cascade use of mid-temperature waste heat pp. 383-390

Wei Han, Liuli Sun, Danxing Zheng, Hongguang Jin, Sijun Ma and Xuye Jing

Spatial planning framework for biomass resources for power production at regional level: A case study for Fujian Province, China pp. 391-406

Yanwei Sun, Run Wang, Jian Liu, Lishan Xiao, Yanjie Lin and William Kao