Applied Energy

1975 - 2025

Current editor(s): J. Yan

From Elsevier
Bibliographic data for series maintained by Catherine Liu ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

2017, volume 191, articles C

GIS-based urban energy systems models and tools: Introducing a model for the optimisation of flexibilisation technologies in urban areas pp. 1-9

Alaa Alhamwi, Wided Medjroubi, Thomas Vogt and Carsten Agert

Low light illumination study on commercially available homojunction photovoltaic cells pp. 10-21

Johnny Russo, William Ray and Marc S. Litz

Melting enhancement in triplex-tube latent heat energy storage system using nanoparticles-metal foam combination pp. 22-34

Jasim Mahdi and Emmanuel C. Nsofor

Impact of high soot-loaded and regenerated diesel particulate filters on the emissions of persistent organic pollutants from a diesel engine fueled with waste cooking oil-based biodiesel pp. 35-43

Chia-Yang Chen, Wen-Jhy Lee, Lin-Chi Wang, Yu-Cheng Chang, Hsi-Hsien Yang, Li-Hao Young, Jau-Huai Lu, Ying I. Tsai, Man-Ting Cheng and John Kennedy Mwangi

Towards non-intrusive thermal load Monitoring of buildings: BES calibration pp. 44-54

R. Enríquez, M.J. Jiménez and M.R. Heras

An investigation on energy performance assessment of a photovoltaic solar wall under buoyancy-induced and fan-assisted ventilation system pp. 55-74

Himanshu Dehra

Spatial modeling framework for bioethanol plant siting and biofuel production potential in the U.S pp. 75-86

B. Sharma, S. Birrell and F.E. Miguez

Using 13X, LiX, and LiPdAgX zeolites for CO2 capture from post-combustion flue gas pp. 87-98

S.J. Chen, M. Zhu, Y. Fu, Y.X. Huang, Z.C. Tao and W.L. Li

Development of a range-extended electric vehicle powertrain for an integrated energy systems research printed utility vehicle pp. 99-110

Paul Chambon, Scott Curran, Shean Huff, Lonnie Love, Brian Post, Robert Wagner, Roderick Jackson and Johney Green

Hot char-catalytic reforming of volatiles from MSW pyrolysis pp. 111-124

Na Wang, Dezhen Chen, Umberto Arena and Pinjing He

Decarbonizing the electricity grid: The impact on urban energy systems, distribution grids and district heating potential pp. 125-140

Boran Morvaj, Ralph Evins and Jan Carmeliet

Environmental benefits from ridesharing: A case of Beijing pp. 141-152

Biying Yu, Ye Ma, Meimei Xue, Bao-Jun Tang, Bin Wang, Jinyue Yan and Yi-Ming Wei

Pure oxygen fixed-bed gasification of wood under high temperature (>1000°C) freeboard conditions pp. 153-162

Henrik Wiinikka, Jonas Wennebro, Marcus Gullberg, Esbjörn Pettersson and Fredrik Weiland

Can the US keep the PACE? A natural experiment in accelerating the growth of solar electricity pp. 163-169

Nadia Ameli, Mauro Pisu and Daniel M. Kammen

Minimizing unbalances in low-voltage microgrids: Optimal scheduling of distributed resources pp. 170-182

G. Carpinelli, F. Mottola, D. Proto and P. Varilone

LES analysis for auto-ignition induced abnormal combustion based on a downsized SI engine pp. 183-192

Jiaying Pan, Haiqiao Wei, Gequn Shu, Mingzhang Pan, Dengquan Feng and Nan Li

Techno-economic analysis of oxy-combustion coal-fired power plant with cryogenic oxygen storage pp. 193-203

Dawid P. Hanak, Dante Powell and Vasilije Manovic

Exergo economic analysis of solar-assisted hybrid power generation systems integrated with thermochemical fuel conversion pp. 204-222

Ting Yue and Noam Lior

Hidden power system inflexibilities imposed by traditional unit commitment formulations pp. 223-238

Germán Morales-España, Laura Ramírez-Elizondo and Benjamin F. Hobbs

A quick-fix design of phase change material by particle blending and spherical agglomeration pp. 239-250

Chih Lin Wang, Kuan Lin Yeh, Chih Wei Chen, Yun Lee, Hung Lin Lee and Tu Lee

A RANS knock model to predict the statistical occurrence of engine knock pp. 251-263

Alessandro d'Adamo, Sebastiano Breda, Stefano Fontanesi, Adrian Irimescu, Simona Silvia Merola and Cinzia Tornatore

Comparison of two residential Smart Grid pilots in the Netherlands and in the USA, focusing on energy performance and user experiences pp. 264-275

Uchechi Obinna, Peter Joore, Linda Wauben and Angele Reinders

Impact of periodic flow reversal of heat transfer fluid on the melting and solidification processes in a latent heat shell and tube storage system pp. 276-286

Soheila Riahi, Wasim Y. Saman, Frank Bruno, Martin Belusko and N.H.S. Tay

Advanced nanomaterials in oil and gas industry: Design, application and challenges pp. 287-310

Munawar Khalil, Badrul Mohamed Jan, Chong Wen Tong and Mohammed Ali Berawi

Impact of spark plug gap on flame kernel propagation and engine performance pp. 311-327

Tawfik Badawy, XiuChao Bao and Hongming Xu

Single and dual stage closed-loop pressure retarded osmosis for power generation: Feasibility and performance pp. 328-345

Ali Altaee, Patricia Palenzuela, Guillermo Zaragoza and Adnan Alhathal AlAnezi

Experience curve development and cost reduction disaggregation for fuel cell markets in Japan and the US pp. 346-357

Max Wei, Sarah J. Smith and Michael D. Sohn

The effects of flake graphite nanoparticles, phase change material, and film cooling on the solar still performance pp. 358-366

S.W. Sharshir, Guilong Peng, Lirong Wu, F.A. Essa, A.E. Kabeel and Nuo Yang

Electricity costs for a Level 3 electric vehicle fueling station integrated with a building pp. 367-384

Robert J. Flores, Brendan P. Shaffer and Jacob Brouwer

Complement or substitute: Ethanol’s uncertain relationship with gasoline under alternative petroleum price and policy scenarios pp. 385-397

Deepayan Debnath, Jarrett Whistance, Wyatt Thompson and Julian Binfield

Understanding the deterministic and probabilistic business cases for occupant based plug load management strategies in commercial office buildings pp. 398-413

S. Wang, A.A. Kim and E.M. Johnson

Combined effects of torrefaction and pelletization parameters on the quality of pellets produced from torrefied biomass pp. 414-424

Magnus Rudolfsson, Eleonora Borén, Linda Pommer, Anders Nordin and Torbjörn A. Lestander

Identifying primary energy requirements in structural path analysis: A case study of China 2012 pp. 425-435

Bo Zhang, Xue Qu, Jing Meng and Xudong Sun

Thermodynamic analysis and preliminary design of closed Brayton cycle using nitrogen as working fluid and coupled to small modular Sodium-cooled fast reactor (SM-SFR) pp. 436-453

Olumide Olumayegun, Meihong Wang and Greg Kelsall

On the benefit of integration of a district heating system with industrial excess heat: An economic and environmental analysis pp. 454-468

Gottfried Weinberger, Shahnaz Amiri and Bahram Moshfegh

Thermo-economic analysis of an integrated solar power generation system using nanofluids pp. 469-491

Adnan Alashkar and Mohamed Gadalla

Power capacity profile estimation for building heating and cooling in demand-side management pp. 492-501

Juan A. Gomez and Miguel F. Anjos

Waste energy recovery and energy efficiency improvement in China’s iron and steel industry pp. 502-520

Qi Zhang, Xiaoyu Zhao, Hongyou Lu, Tuanjie Ni and Yu Li

Forecasting carbon price using empirical mode decomposition and evolutionary least squares support vector regression pp. 521-530

Bangzhu Zhu, Dong Han, Ping Wang, Zhanchi Wu, Tao Zhang and Yi-Ming Wei

Enabling electricity access in developing countries: A probabilistic weather driven house based approach pp. 531-548

Ameena Saad Al-Sumaiti, Magdy M.A. Salama and Mohamed El-Moursi

Thermodynamic modeling of NH3-CO2-SO2-K2SO4-H2O system for combined CO2 and SO2 capture using aqueous NH3 pp. 549-558

Guojie Qi and Shujuan Wang

Experimental and thermodynamic study on the performance of water electrolysis by solid oxide electrolyzer cells with Nb-doped Co-based perovskite anode pp. 559-567

Zehua Pan, Qinglin Liu, Lan Zhang, Juan Zhou, Caizhi Zhang and Siew Hwa Chan

The effect of cylinder liner operating temperature on frictional loss and engine emissions in piston ring conjunction pp. 568-581

R. Rahmani, H. Rahnejat, B. Fitzsimons and D. Dowson

Probabilistic power flow analysis considering the dependence between power and heat pp. 582-592

Xueqian Fu, Hongbin Sun, Qinglai Guo, Zhaoguang Pan, Xiurong Zhang and Shunqi Zeng

Benefits of PCM underfloor heating with PCM wallboards for space heating in winter pp. 593-602

Paul Devaux and Mohammed Mehdi Farid

Ethanol blends in spark ignition engines: RON, octane-added value, cooling effect, compression ratio, and potential engine efficiency gain pp. 603-619

Chongming Wang, Soheil Zeraati-Rezaei, Liming Xiang and Hongming Xu

Solar-assisted integrated biogas solid oxide fuel cell (SOFC) installation in wastewater treatment plant: Energy and economic analysis pp. 620-638

A.S. Mehr, M. Gandiglio, M. MosayebNezhad, A. Lanzini, S.M.S. Mahmoudi, M. Yari and M. Santarelli

Combined heat and power from the intermediate pyrolysis of biomass materials: performance, economics and environmental impact pp. 639-652

Y. Yang, J.G. Brammer, D.G. Wright, J.A. Scott, Carlos Serrano-Cinca and A.V. Bridgwater

Short-term wind speed forecasting by spectral analysis from long-term observations with missing values pp. 653-662

Hüseyin Akçay and Tansu Filik

Spatial matching of large-scale grid-connected photovoltaic power generation with utility demand in Peninsular Malaysia pp. 663-688

Mahmoud Lurwan Sabo, Norman Mariun, Hashim Hizam, Mohd Amran Mohd Radzi and Azmi Zakaria

Understanding the role of low reactivity fuel stratification in a dual fuel RCCI engine – A simulation study pp. 689-708

Maciej Mikulski and Cemil Bekdemir

A probabilistic portfolio-based model for financial valuation of community solar pp. 709-726

Mahmoud Shakouri, Hyun Woo Lee and Yong-Woo Kim