Applied Energy

1975 - 2025

Current editor(s): J. Yan

From Elsevier
Bibliographic data for series maintained by Catherine Liu ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

2015, volume 156, articles C

The optimal thermo-optical properties and energy saving potential of adaptive glazing technologies pp. 1-15

Fabio Favoino, Mauro Overend and Qian Jin

Environmental externality of coal use in China: Welfare effect and tax regulation pp. 16-31

Zhan-Ming Chen, Yu Liu, Ping Qin, Bo Zhang, Leo Lester, Guanghua Chen, Yumei Guo and Xinye Zheng

Hybrid solid oxide fuel cells–gas turbine systems for combined heat and power: A review pp. 32-85

Annamaria Buonomano, Francesco Calise, d’Accadia, Massimo Dentice, Adolfo Palombo and Maria Vicidomini

Upgrading existing coal-fired power plants through heavy-duty and aeroderivative gas turbines pp. 86-98

Roberto Carapellucci and Lorena Giordano

Diesel autothermal reforming with hydrogen peroxide for low-oxygen environments pp. 99-106

Gwangwoo Han, Sangho Lee and Joongmyeon Bae

Operational flexibility and economics of power plants in future low-carbon power systems pp. 107-128

Anne Sjoerd Brouwer, Machteld van den Broek, Ad Seebregts and André Faaij

Design considerations for an engine-integral reciprocating natural gas compressor pp. 129-137

Mohammad Malakoutirad, Thomas H. Bradley and Chris Hagen

In-nozzle flow and spray characteristics for mineral diesel, Karanja, and Jatropha biodiesels pp. 138-148

Avinash Kumar Agarwal, Sibendu Som, Pravesh Chandra Shukla, Harsh Goyal and Douglas Longman

Combustion-response mapping procedure for internal-combustion engine emissions pp. 149-158

T. Korakianitis, S. Imran, N. Chung, Hassan Ali, D.R. Emberson and R.J. Crookes

Well-to-wheel life cycle assessment of transportation fuels derived from different North American conventional crudes pp. 159-173

Md. Mustafizur Rahman, Christina Canter and Amit Kumar

Hydrogen production from glycerol by Escherichia coli and other bacteria: An overview and perspectives pp. 174-184

Karen Trchounian and Armen Trchounian

Power system impacts of electric vehicles in Germany: Charging with coal or renewables? pp. 185-196

Wolf-Peter Schill and Clemens Gerbaulet

Development of sodium/lithium/fly ash sorbents for high temperature post-combustion CO2 capture pp. 197-206

Aimaro Sanna, Ili Ramli and M. Mercedes Maroto-Valer

The preparation of the hydrotalcite-based composite phase change material pp. 207-212

Min Li and Qiangang Guo

A low cost seasonal solar soil heat storage system for greenhouse heating: Design and pilot study pp. 213-222

Liang Zhang, Peng Xu, Jiachen Mao, Xu Tang, Zhengwei Li and Jianguo Shi

A novel photo-thermochemical cycle for the dissociation of CO2 using solar energy pp. 223-229

Yanwei Zhang, Chenyu Xu, Jingche Chen, Xuhan Zhang, Zhihua Wang, Junhu Zhou and Kefa Cen

How will greenhouse gas emissions from motor vehicles be constrained in China around 2030? pp. 230-240

Bo Zheng, Qiang Zhang, Jens Borken-Kleefeld, Hong Huo, Dabo Guan, Zbigniew Klimont, Glen Peters and Kebin He

Impact of internal entrainment on high intensity distributed combustion pp. 241-250

Ahmed E.E. Khalil and Ashwani K. Gupta

A decomposition–ensemble model with data-characteristic-driven reconstruction for crude oil price forecasting pp. 251-267

Lean Yu, Zishu Wang and Ling Tang

Off-design performance comparison of an organic Rankine cycle under different control strategies pp. 268-279

Dongshuai Hu, Ya Zheng, Yi Wu, Saili Li and Yiping Dai

Performance analysis of a dual-loop organic Rankine cycle (ORC) system with wet steam expansion for engine waste heat recovery pp. 280-289

Jian Song and Chun-wei Gu

Exergoeconomic assessment of CHP-integrated biomass upgrading pp. 290-305

Thomas Kohl, Moises Teles, Kristian Melin, Timo Laukkanen, Mika Järvinen, Song Won Park and Reinaldo Guidici

Design and thermal properties of a novel ternary chloride eutectics for high-temperature solar energy storage pp. 306-310

Xiaolan Wei, Ming Song, Weilong Wang, Jing Ding and Jianping Yang

High efficiency novel window air conditioner pp. 311-320

Pradeep Bansal

Short-term wind speed prediction based on robust Kalman filtering: An experimental comparison pp. 321-330

Carlos D. Zuluaga, Mauricio A. Álvarez and Eduardo Giraldo

Improving the stability of synthetic CaO-based CO2 sorbents by structural promoters pp. 331-343

Andy Antzara, Eleni Heracleous and Angeliki A. Lemonidou

Energetic/economic penalty of CO2 emissions and application to coal-to-olefins projects in China pp. 344-353

Huairong Zhou, Yu Qian and Siyu Yang

Lipid content in microalgae determines the quality of biocrude and Energy Return On Investment of hydrothermal liquefaction pp. 354-361

Gursong Yoo, Min S. Park, Ji-Won Yang and Minkee Choi

Investigation of offshore wind energy potential in Hong Kong based on Weibull distribution function pp. 362-373

Z.R. Shu, Q.S. Li and P.W. Chan

Heat recovery using heat pumps in non-energy intensive industry: Are Energy Saving Certificates a solution for the food and drink industry in France? pp. 374-389

Gondia Sokhna Seck, Gilles Guerassimoff and Nadia Maïzi

Experiment on superadiabatic radiant burner with augmented preheating pp. 390-397

H. Wu, Y.J. Kim, V. Vandadi, C. Park, M. Kaviany and O.C. Kwon

Thermodynamic optimisation of the performance of a parabolic trough receiver using synthetic oil–Al2O3 nanofluid pp. 398-412

Aggrey Mwesigye, Zhongjie Huan and Josua P. Meyer

Characterization of photovoltaic devices for indoor light harvesting and customization of flexible dye solar cells to deliver superior efficiency under artificial lighting pp. 413-422

Francesca De Rossi, Tadeo Pontecorvo and Thomas M. Brown

An analysis of the investment risk related to the integration of a supercritical coal-fired combined heat and power plant with an absorption installation for CO2 separation pp. 423-435

Łukasz Bartela, Anna Skorek-Osikowska and Janusz Kotowicz

Long-term chronological load modeling in power system studies with energy storage systems pp. 436-448

Abbas Marini, Mohammad Amin Latify, Mohammad Sadegh Ghazizadeh and Ahmad Salemnia

Simulation of environmental impact scores within the life cycle of mixed wood chips from alternative short rotation coppice systems in Flanders (Belgium) pp. 449-464

Benedetto Rugani, Katarzyna Golkowska, Ian Vázquez-Rowe, Daniel Koster, Enrico Benetto and Pieter Verdonckt

Enhancement of energy efficiency in a paint curing oven via CFD approach: Case study in an air-conditioning plant pp. 465-477

Sathit Niamsuwan, Paisan Kittisupakorn and Ajaree Suwatthikul

Effect of surface active agent on thermal properties of carbonate salt/carbon nanomaterial composite phase change material pp. 478-489

Y.B. Tao, C.H. Lin and Y.L. He

CO2-abatement cost of residential heat pumps with active demand response: demand- and supply-side effects pp. 490-501

Dieter Patteeuw, Glenn Reynders, Kenneth Bruninx, Christina Protopapadaki, Erik Delarue, D’haeseleer, William, Dirk Saelens and Lieve Helsen

Multivariate statistical and similarity measure based semiparametric modeling of the probability distribution: A novel approach to the case study of mid-long term electricity consumption forecasting in China pp. 502-518

Zhen Shao, Fei Gao, Qiang Zhang and Shan-Lin Yang

Experimental investigation on the energy and exergy performance of a coiled tube solar receiver pp. 519-527

Jianqin Zhu, Kai Wang, Hongwei Wu, Dunjin Wang, Juan Du and A.G. Olabi

Comparison of numerical weather prediction based deterministic and probabilistic wind resource assessment methods pp. 528-541

Jie Zhang, Caroline Draxl, Thomas Hopson, Luca Delle Monache, Emilie Vanvyve and Bri-Mathias Hodge

Features and evolution of international fossil energy trade relationships: A weighted multilayer network analysis pp. 542-554

Cuixia Gao, Mei Sun and Bo Shen

Optimal exergy control of building HVAC system pp. 555-565

M. Razmara, M. Maasoumy, M. Shahbakhti and R.D. Robinett

Performance analysis of a prototype small scale electricity-producing biomass cooking stove pp. 566-576

O’Shaughnessy, S.M., M.J. Deasy, J.V. Doyle and A.J. Robinson

Reinforcement learning for optimal control of low exergy buildings pp. 577-586

Lei Yang, Zoltan Nagy, Philippe Goffin and Arno Schlueter

Printed flexible thermoelectric generators for use on low levels of waste heat pp. 587-592

Deepa Madan, Zuoqian Wang, Paul K. Wright and James W. Evans

Optimal operation of a residential district-level combined photovoltaic/natural gas power and cooling system pp. 593-606

Abigail D. Ondeck, Thomas F. Edgar and Michael Baldea

PACPIM: New decision-support model of optimized portfolio analysis for community-based photovoltaic investment pp. 607-617

Mahmoud Shakouri, Hyun Woo Lee and Kunhee Choi

Syngas-based annex concepts for chemical energy storage and improving flexibility of pulverized coal combustion power plants pp. 618-627

Christian Wolfersdorf, Kristin Boblenz, Robert Pardemann and Bernd Meyer

Simulation study on boil-off gas minimization and recovery strategies at LNG exporting terminals pp. 628-641

Yogesh M. Kurle, Sujing Wang and Qiang Xu

Demand side management in a day-ahead wholesale market: A comparison of industrial & social welfare approaches pp. 642-654

Bo Jiang, Amro M. Farid and Kamal Youcef-Toumi

Optimal dynamic expansion planning of distribution systems considering non-renewable distributed generation using a new heuristic double-stage optimization solution approach pp. 655-665

Masoud Ahmadigorji and Nima Amjady

The economic competitiveness and emissions of battery electric vehicles in China pp. 666-675

Xin Zhao, Otto C. Doering and Wallace Tyner

Reactive absorption of CO2 into enzyme accelerated solvents: From laboratory to pilot scale pp. 676-685

Anna-Katharina Kunze, Greg Dojchinov, Victoria S. Haritos and Philip Lutze

Energy consumption and CO2 analysis of different types of chippers used in wood biomass plantations pp. 686-692

Marco Manzone

Adjusting the CO2 cap to subsidised RES generation: Can CO2 prices be decoupled from renewable policy? pp. 693-702

Jörn C. Richstein, Émile J.L. Chappin and Laurens J. de Vries

Multi-objective geometric optimization of a PCM based matrix type composite heat sink pp. 703-714

R. Srikanth, Pavan Nemani and C. Balaji

A novel small dynamic solar thermal desalination plant with a fluid piston converter pp. 715-726

Khamid Mahkamov, Eugene Orda, Basim Belgasim and Irina Makhkamova

A general framework to select working fluid and configuration of ORCs for low-to-medium temperature heat sources pp. 727-746

Jacopo Vivian, Giovanni Manente and Andrea Lazzaretto

Characterization of biomass combustion at high temperatures based on an upgraded single particle model pp. 749-755

Jun Li, Manosh C. Paul, Paul L. Younger, Ian Watson, Mamdud Hossain and Stephen Welch

Catalytic oxidation characteristics of CH4–air mixtures over metal foam monoliths pp. 756-761

Yanxia Li, Chaoming Luo, Zhongliang Liu and Lixia Sang

Application and research on Regenerative High Temperature Air Combustion technology on low-rank coal pyrolysis pp. 762-766

Pei Pei, Qicheng Wang and Daohong Wu

Influences of activation agent impregnated sewage sludge pyrolysis on emission characteristics of volatile combustion and De-NOx performance of activated char pp. 767-775

Hui Chen, Dezhen Chen and Liu Hong

Numerical simulation study on correlation between ion current signal and NOX emissions in controlled auto-ignition engine pp. 776-782

Yintong Liu, Liguang Li, Junyu Ye, Zhijun Wu and Jun Deng

The effect of ethanol blending on mixture formation, combustion and soot emission studied in an optical DISI engine pp. 783-792

Michael Storch, Florian Hinrichsen, Michael Wensing, Stefan Will and Lars Zigan

Numerical optimisation for model evaluation in combustion kinetics pp. 793-803

M. Fischer and X. Jiang

Turbulent combustion modelling of a confined premixed jet flame including heat loss effects using tabulated chemistry pp. 804-815

S. Gövert, D. Mira, J.B.W. Kok, M. Vázquez and G. Houzeaux