Applied Energy

1975 - 2025

Current editor(s): J. Yan

From Elsevier
Bibliographic data for series maintained by Catherine Liu ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

2013, volume 105, articles C

Dilute acid pretreatment and fermentation of sugar beet pulp to ethanol pp. 1-7

Yi Zheng, Christopher Lee, Chaowei Yu, Yu-Shen Cheng, Ruihong Zhang, Bryan M. Jenkins and Jean S. VanderGheynst

Experimental and numerical investigation on the jet characteristics of spark ignition direct injection gaseous injector pp. 8-16

Iman Chitsaz, Mohammad Hassan Saidi, Ali Asghar Mozafari and Alireza Hajialimohammadi

Comparative evaluation of emission and fuel economy of an automotive spark ignition vehicle fuelled with methane enriched biogas and CNG using chassis dynamometer pp. 17-29

K.A. Subramanian, Vinaya C. Mathad, V.K. Vijay and P.M.V. Subbarao

Multi-decadal variability in a centennial reconstruction of daily wind pp. 30-46

N. Kirchner-Bossi, L. Prieto, R. García-Herrera, L. Carro-Calvo and S. Salcedo-Sanz

Numerical investigations of flow field designs for vanadium redox flow batteries pp. 47-56

Q. Xu, T.S. Zhao and P.K. Leung

Thermogravimetric analysis and kinetics of co-pyrolysis of raw/torrefied wood and coal blends pp. 57-65

Ke-Miao Lu, Wen-Jhy Lee, Wei-Hsin Chen and Ta-Chang Lin

Fuel moisture soft-sensor and its validation for the industrial BioPower 5 CHP plant pp. 66-74

J. Kortela and S-L. Jämsä-Jounela

Analytical strategies for renewable distributed generation integration considering energy loss minimization pp. 75-85

Duong Quoc Hung, N. Mithulananthan and R.C. Bansal

Experimental study on the performance of hydrogen production from miniature methanol–steam reformer integrated with Swiss-roll type combustor for PEMFC pp. 86-98

Rei-Yu Chein, Yen-Cho Chen, Che-Ming Chang and J.N. Chung

Effects of exhaust gas recycle in a downsized gasoline engine pp. 99-107

E. Galloni, G. Fontana and R. Palmaccio

Innovative combined heat and power system based on a double shaft intercooled externally fired gas cycle pp. 108-115

P. Iora and P. Silva

Experimental study of an automotive Diesel engine efficiency when running under stoichiometric conditions pp. 116-124

Xavier Tauzia and Alain Maiboom

Performance evaluation of a polymer electrolyte membrane fuel cell system for powering portable freezer pp. 125-137

Hun Sik Han, Changhwan Cho, Seo Young Kim and Jae Min Hyun

Modeling of financial incentives for investments in energy storage systems that promote the large-scale integration of wind energy pp. 138-154

Dimitrios Zafirakis, Konstantinos J. Chalvatzis, Giovanni Baiocchi and George Daskalakis

Experimental investigation of temperature distribution over a planar solid oxide fuel cell pp. 155-160

Omid Razbani, Ivar Wærnhus and Mohsen Assadi

Use of metamodeling optimal approach promotes the performance of proton exchange membrane fuel cell (PEMFC) pp. 161-169

Shan-Jen Cheng, -Ming Miao and Sheng-Ju Wu

Optimal sizing for UPS systems based on batteries and/or fuel cell pp. 170-181

Manuel Jesús Vasallo, José Manuel Bravo and José Manuel Andújar

Feasibility evaluation of solar photovoltaic pumping irrigation system based on analysis of dynamic variation of groundwater table pp. 182-193

Xuerui Gao, Jiahong Liu, Jun Zhang, Jinyue Yan, Shujun Bao, He Xu and Tao Qin

High strength wastewater treatment accompanied by power generation using air cathode microbial fuel cell pp. 194-206

Surajbhan Sevda, Xochitl Dominguez-Benetton, Karolien Vanbroekhoven, Heleen De Wever, T.R. Sreekrishnan and Deepak Pant

Utilization of wood biomass char in a direct carbon fuel cell (DCFC) system pp. 207-216

Seong Yool Ahn, Seong Yong Eom, Young Hoon Rhie, Yon Mo Sung, Cheor Eon Moon, Gyung Min Choi and Duck Jool Kim

Harmonizing biodiesel fuel standards in East Asia: Motivations, progress and challenges pp. 217-222

Xunpeng Shi and Shinichi Goto

Diesel diffusion flame simulation using reduced n-heptane oxidation mechanism pp. 223-228

Kesong Zhang, Zheng Liang, Jianxin Wang and Zhiming Wang

Paraffin/diatomite composite phase change material incorporated cement-based composite for thermal energy storage pp. 229-237

Biwan Xu and Zongjin Li

Analysis of environmental and economic benefits of integrated Exhaust Energy Recovery (EER) for vehicles pp. 238-243

Zhijun Peng, Tianyou Wang, Yongling He, Xiaoyi Yang and Lipeng Lu

Utilization and performance evaluation of a surplus air heat pump system for greenhouse cooling and heating pp. 244-251

Seung-Hwan Yang and Joong Yong Rhee

Gaseous and particulate matter emissions of biofuel blends in dual-injection compared to direct-injection and port injection pp. 252-261

Ritchie Daniel, Hongming Xu, Chongming Wang, Dave Richardson and Shijin Shuai

Constant pressure hydraulic energy storage through a variable area piston hydraulic accumulator pp. 262-270

James D. Van de Ven

A two-stage combustion system for burning lean gasoline mixtures in a stationary spark ignited engine pp. 271-281

Stanislaw Szwaja, Arkadiusz Jamrozik and Wojciech Tutak

Offering model for a virtual power plant based on stochastic programming pp. 282-292

Hrvoje Pandžić, Juan M. Morales, Antonio J. Conejo and Igor Kuzle

Dynamic heat exchanger model for performance prediction and control system design of automotive waste heat recovery systems pp. 293-303

Tilmann Abbe Horst, Hermann-Sebastian Rottengruber, Marco Seifert and Jürgen Ringler

A multi-level energy management system for multi-source electric vehicles – An integrated rule-based meta-heuristic approach pp. 304-318

João P. Trovão, Paulo G. Pereirinha, Humberto M. Jorge and Carlos Henggeler Antunes

Fuel properties, engine performance and environmental benefits of biodiesel produced by a green process pp. 319-326

Soham Chattopadhyay and Ramkrishna Sen

Novel mixing for ultra-high thermal intensity distributed combustion pp. 327-334

Ahmed E.E. Khalil, Vaibhav K. Arghode and Ashwani K. Gupta

Fuel economy optimization of an Atkinson cycle engine using genetic algorithm pp. 335-348

Jinxing Zhao and Min Xu

The valorization of glycerol: Economic assessment of an innovative process for the bioconversion of crude glycerol into ethanol and hydrogen pp. 349-357

C. Varrone, R. Liberatore, T. Crescenzi, G. Izzo and A. Wang

Block Configuration Modeling: A novel simulation model to emulate building occupant peer networks and their impact on building energy consumption pp. 358-368

Jiayu Chen, Rishee K. Jain and John E. Taylor

Cathode–anode side interaction in SOFC hybrid systems pp. 369-379

Mario L. Ferrari and Aristide F. Massardo

Ultrasound-assisted transesterification of crude Jatropha oil using alumina-supported heteropolyacid catalyst pp. 380-388

Ali Sabri Badday, Ahmad Zuhairi Abdullah and Keat-Teong Lee

Ethanol production by simultaneous saccharification and fermentation in rotary drum reactor using thermotolerant Kluveromyces marxianus pp. 389-394

Yu-Sheng Lin, Wen-Chien Lee, Kow-Jen Duan and Yen-Han Lin

Scenario analysis of large scale algae production in tubular photobioreactors pp. 395-406

P.M. Slegers, P.J.M. van Beveren, R.H. Wijffels, G. van Straten and A.J.B. van Boxtel

The effects of spark timing, unburned gas temperature, and negative valve overlap on the rates of stoichiometric spark assisted compression ignition combustion pp. 407-417

Laura Manofsky Olesky, Jason B. Martz, George A. Lavoie, Jiri Vavra, Dennis N. Assanis and Aristotelis Babajimopoulos

Stochastic unit commitment with sub-hourly dispatch constraints pp. 418-422

Jiadong Wang, Jianhui Wang, Cong Liu and Juan P. Ruiz

What moves wind energy development in China? Show me the money! pp. 423-429

J.C.K. Lam, Chi-Keung Woo, F. Kahrl and W.K. Yu

Thermophotovoltaics on the move to applications pp. 430-438

Bernd Bitnar, Wilhelm Durisch and Reto Holzner

2013, volume 104, articles C

A methodology for the low-cost optimisation of small wind turbine performance pp. 1-9

A. Arroyo, M. Manana, C. Gomez, I. Fernandez, F. Delgado and Ahmed F. Zobaa

Bioenergy production and forest multifunctionality: A trade-off analysis using multiscale GIS model in a case study in Italy pp. 10-20

Sandro Sacchelli, Isabella De Meo and Alessandro Paletto

Numerical simulations of carbon monoxide poisoning in high temperature proton exchange membrane fuel cells with various flow channel designs pp. 21-41

Kui Jiao, Yibo Zhou, Qing Du, Yan Yin, Shuhai Yu and Xianguo Li

Continuous wind speed models based on stochastic differential equations pp. 42-49

Rafael Zárate-Miñano, Marian Anghel and Federico Milano

A new shape design method of salt cavern used as underground gas storage pp. 50-61

Tongtao Wang, Xiangzhen Yan, Henglin Yang, Xiujuan Yang, Tingting Jiang and Shuai Zhao

A comparison of different pre-treatments to increase methane production from two agricultural substrates pp. 62-70

C. Sambusiti, F. Monlau, E. Ficara, H. Carrère and F. Malpei

Hydrogen addition effects on high intensity distributed combustion pp. 71-78

Ahmed E.E. Khalil and Ashwani K. Gupta

Comparison of pinned and finned tubes in a phase change thermal energy storage system using CFD pp. 79-86

N.H.S. Tay, F. Bruno and M. Belusko

Achieving better energy-efficient air conditioning – A review of technologies and strategies pp. 87-104

K.J. Chua, S.K. Chou, W.M. Yang and J. Yan

Energy and emissions efficiency patterns of Chinese regions: A multi-directional efficiency analysis pp. 105-116

Ke Wang, Yi-Ming Wei and Xian Zhang

HVAC systems testing and check: A simplified model to predict thermal comfort conditions in moderate environments pp. 117-127

C. Buratti, P. Ricciardi and M. Vergoni

Analysis of potential energy, economic and environmental savings in residential buildings: Solar collectors combined with microturbines pp. 128-136

I. Suárez, M.M. Prieto and Javier Fernandez-Macho

Experimental investigation of dynamic melting in a tube-in-tank PCM system pp. 137-148

N.H.S. Tay, F. Bruno and M. Belusko

Sensitivity of combustion noise and NOx and soot emissions to pilot injection in PCCI Diesel engines pp. 149-157

A.J. Torregrosa, A. Broatch, A. García and L.F. Mónico

Associations of individual, household and environmental characteristics with carbon dioxide emissions from motorised passenger travel pp. 158-169

Christian Brand, Anna Goodman, Harry Rutter, Yena Song and David Ogilvie

Assessment of the resource associated with biomethane from food waste pp. 170-177

James D. Browne and Jerry D. Murphy

Economic assessment of the mobilized thermal energy storage (M-TES) system for distributed heat supply pp. 178-186

Hailong Li, Weilong Wang, Jinyue Yan and Erik Dahlquist

The selection of volume ratio of two-stage rotary compressor and its effects on air-to-water heat pump with flash tank cycle pp. 187-196

Younghwan Ko, Sangkyoung Park, Simon Jin, Byungsoon Kim and Ji Hwan Jeong

Low severity dilute-acid hydrolysis of sweet sorghum bagasse pp. 197-206

Aditi Banerji, M. Balakrishnan and V.V.N. Kishore

Potential of air-side economizers for data center cooling: A case study for key Australian cities pp. 207-219

Jayantha Siriwardana, Saliya Jayasekara and Saman K. Halgamuge

Investigating the price discovery and risk transfer functions in the crude oil and gasoline futures markets: Some empirical evidence pp. 220-228

Yue-Jun Zhang and Zi-Yi Wang

Hierarchical market integration of responsive loads as spinning reserve pp. 229-238

D. Wang, S. Parkinson, W. Miao, H. Jia, C. Crawford and N. Djilali

Economic and environmental impact of lead-acid batteries in grid-connected domestic PV systems pp. 239-249

Eoghan McKenna, Marcelle McManus, Sam Cooper and Murray Thomson

Optimal operation scheduling of a pumping station with multiple pumps pp. 250-257

Xiangtao Zhuan and Xiaohua Xia

An empirical analysis of the role of China’s exports on CO2 emissions pp. 258-267

Nyakundi Michieka, Jerald Fletcher and James Burnett

Effect of rotational speed on the performances of a desiccant wheel pp. 268-275

Giovanni Angrisani, Carlo Roselli and Maurizio Sasso

Exploring drivers for energy efficiency within small- and medium-sized enterprises: First evidences from Italian manufacturing enterprises pp. 276-285

Enrico Cagno and Andrea Trianni

Performance of a pellet boiler fired with agricultural fuels pp. 286-296

Lara Carvalho, Elisabeth Wopienka, Christian Pointner, Joakim Lundgren, Vijay Kumar Verma, Walter Haslinger and Christoph Schmidl

Exploring the nexus of electricity consumption, economic growth, energy prices and technology innovation in Malaysia pp. 297-305

Chor Foon Tang and Eu Chye Tan

Catalytic activity of Ni3S2 and effects of reactor wall in hydrogen production from water with hydrogen sulphide as a reducer under hydrothermal conditions pp. 306-309

Yuanqing Wang, Fangming Jin, Xu Zeng, Cuixiang Ma, Fengwen Wang, Guodong Yao and Zhenzi Jing

The dynamic links between CO2 emissions, economic growth and coal consumption in China and India pp. 310-318

Chandran VGR Govindaraju and Chor Foon Tang

Energy market integration and equitable growth across countries pp. 319-325

Yu Sheng and Xunpeng Shi

Energy harvesting from the FC stack that operates using the MPP tracking based on modified extremum seeking control pp. 326-336

Nicu Bizon

A case study on energy consumption and overheating for a UK industrial building with rooflights pp. 337-344

Xiaoxin Wang, Christopher Kendrick, Raymond Ogden, Nicholas Walliman and Bousmaha Baiche

Biomass production of Scenedesmus obliquus from mixtures of urban and olive-oil mill wastewaters used as culture medium pp. 345-352

Gassan Hodaifa, Sebastián Sánchez, Mª. Eugenia Martínez and Rafael Órpez

A mixed integer non-linear programming model for tactical value chain optimization of a wood biomass power plant pp. 353-361

Nazanin Shabani and Taraneh Sowlati

Using Taguchi method on combustion performance of a diesel engine with diesel/biodiesel blend and port-inducting H2 pp. 362-370

Horng-Wen Wu and Zhan-Yi Wu

Are fluctuations in energy variables permanent or transitory? A survey of the literature on the integration properties of energy consumption and production pp. 371-378

Russell Smyth

Development of polynomial regression models for composite dynamic envelopes’ thermal performance forecasting pp. 379-391

Lazaros Elias Mavromatidis, Anna Bykalyuk and Hervé Lequay

Analytical models for the computation and optimization of single and double glazing flat plate solar collectors with normal and small air gap spacing pp. 392-399

Alison Subiantoro and Kim Tiow Ooi

Air-breathing membraneless laminar flow-based fuel cells: Do they breathe enough oxygen? pp. 400-407

Jin Xuan, D.Y.C. Leung, Huizhi Wang, Michael K.H. Leung, Bin Wang and Meng Ni

Impact of finite-rate kinetics on carbon conversion in a high-pressure, single-stage entrained flow gasifier with coal–CO2 slurry feed pp. 408-417

Cristina Botero, Randall P. Field, Howard J. Herzog and Ahmed F. Ghoniem

Adsorbents for the post-combustion capture of CO2 using rapid temperature swing or vacuum swing adsorption pp. 418-433

Niklas Hedin, Linnéa Andersson, Lennart Bergström and Jinyue Yan

Thermal and water management of low temperature Proton Exchange Membrane Fuel Cell in fork-lift truck power system pp. 434-444

Elham Hosseinzadeh, Masoud Rokni, Abid Rabbani and Henrik Hilleke Mortensen

Electric vehicles and large-scale integration of wind power – The case of Inner Mongolia in China pp. 445-456

Wen Liu, Weihao Hu, Henrik Lund and Zhe Chen

Energy conservation in China: Key provincial sectors at two-digit level pp. 457-465

Hua Liao, Jian Du and Yi-Ming Wei

Impact assessment of global and national biofuels developments on agriculture in Pakistan pp. 466-474

Tariq Ali, Jikun Huang and Jun Yang

Macroeconomic effects of oil price shocks in Brazil and in the United States pp. 475-486

Tiago Cavalcanti and Joao Jalles

Strategic perspectives on energy management: A case study in the process industry pp. 487-496

Martin Rudberg, Martin Waldemarsson and Helene Lidestam

Consistent ocean wave energy harvesting using electroactive polymer (dielectric elastomer) artificial muscle generators pp. 497-502

S. Chiba, M. Waki, T. Wada, Y. Hirakawa, K. Masuda and T. Ikoma

Recoverable and reusable hydrochloric acid used as a homogeneous catalyst for biodiesel production pp. 503-509

Chia-Hung Su

Analytical model for short-time responses of ground heat exchangers with U-shaped tubes: Model development and validation pp. 510-516

Min Li and Alvin C.K. Lai

Integration of bioethanol as an in-process material in biorefineries using mass pinch analysis pp. 517-526

Elias Martinez-Hernandez, Jhuma Sadhukhan and Grant M. Campbell

Predicting the behavior of a grid-connected photovoltaic system from measurements of solar radiation and ambient temperature pp. 527-537

J. Hernandez, G. Gordillo and W. Vallejo

A review of solar collectors and thermal energy storage in solar thermal applications pp. 538-553

Y. Tian and C.Y. Zhao

An overview of developments in adsorption refrigeration systems towards a sustainable way of cooling pp. 554-567

Biplab Choudhury, Bidyut Baran Saha, Pradip K. Chatterjee and Jyoti Prakas Sarkar

A spectroscopy study of gasoline partially premixed compression ignition spark assisted combustion pp. 568-575

J.V. Pastor, J.M. García-Oliver, A. García, C. Micó and R. Durrett

Trends in global warming and human health impacts related to Brazilian sugarcane ethanol production considering black carbon emissions pp. 576-582

Marcelo Galdos, Otávio Cavalett, Joaquim E.A. Seabra, Luiz Augusto Horta Nogueira and Antonio Bonomi

Flexibility of a combined heat and power system with thermal energy storage for district heating pp. 583-591

Thomas Nuytten, Bert Claessens, Kristof Paredis, Johan Van Bael and Daan Six

A novel hybrid process of reverse electrodialysis and reverse osmosis for low energy seawater desalination and brine management pp. 592-602

Weiyi Li, William B. Krantz, Emile R. Cornelissen, Jan W. Post, Arne R.D. Verliefde and Chuyang Y. Tang

Simulation of thermal performance of horizontal slinky-loop heat exchangers for ground source heat pumps pp. 603-610

Chiew Shan Anthony Chong, Guohui Gan, Anne Verhoef, Raquel Gonzalez Garcia and Pier Luigi Vidale

A techno-economic evaluation of a biomass energy conversion park pp. 611-622

Miet Van Dael, Steven Van Passel, Luc Pelkmans, Ruben Guisson, Patrick Reumermann, Nathalie Marquez Luzardo, Nele Witters and Jan Broeze

Integrated biomass-based production of district heat, electricity, motor fuels and pellets of different scales pp. 623-632

Nguyen Le Truong and Leif Gustavsson

Environmental performance of crop residues as an energy source for electricity production: The case of wheat straw in Denmark pp. 633-641

Thu Lan T. Nguyen, John E. Hermansen and Lisbeth Mogensen

The role of grid extensions in a cost-efficient transformation of the European electricity system until 2050 pp. 642-652

Michaela Fürsch, Simeon Hagspiel, Cosima Jägemann, Stephan Nagl, Dietmar Lindenberger and Eckehard Tröster

CFD modeling of oxy-coal combustion: Prediction of burnout, volatile and NO precursors release pp. 653-665

L. Álvarez, M. Gharebaghi, J.M. Jones, M. Pourkashanian, A. Williams, J. Riaza, C. Pevida, J.J. Pis and F. Rubiera

Integration of intermittent renewable power supply using grid-connected vehicles – A 2030 case study for California and Germany pp. 666-682

David Dallinger, Schubert Gerda and Martin Wietschel

A review on novel processes of biodiesel production from waste cooking oil pp. 683-710

Amin Talebian-Kiakalaieh, Nor Aishah Saidina Amin and Hossein Mazaheri

Electric storage in California’s commercial buildings pp. 711-722

M. Stadler, M. Kloess, M. Groissböck, G. Cardoso, R. Sharma, M.C. Bozchalui and C. Marnay

Development of an Environment and energy Geographical Information System (E-GIS) construction model to support environmentally friendly urban planning pp. 723-739

In-Ae Yeo, Seong-Hwan Yoon and Jurng-Jae Yee

Off-grid photovoltaic vehicle charge using second life lithium batteries: An experimental and numerical investigation pp. 740-750

Shi Jie Tong, Adam Same, Mark A. Kootstra and Jae Wan Park

Evaluation of self-water-removal in a dead-ended proton exchange membrane fuel cell pp. 751-757

Zhongmin Wan, Jing Liu, Zhiping Luo, Zhengkai Tu, Zhichun Liu and Wei Liu

Methodology to design a bottoming Rankine cycle, as a waste energy recovering system in vehicles. Study in a HDD engine pp. 758-771

V. Macián, J.R. Serrano, V. Dolz and J. Sánchez

Effect of reaction parameters on the quality of captured sulfur in Claus process pp. 772-776

H. Selim, A.K. Gupta and A. Al Shoaibi

Direct conversion of liquid natural gas (LNG) to syngas and ethylene using non-equilibrium pulsed discharge pp. 777-782

Mingyue Ding, Taichi Hayakawa, Chunyang Zeng, Yuzhou Jin, Qi Zhang, Tiejun Wang, Longlong Ma, Yoshiharu Yoneyama and Noritatsu Tsubaki

A novel graphical approach to target CO2 emissions for energy resource planning and utility system optimization pp. 783-790

Mohmmad A. Al-Mayyahi, Andrew F.A. Hoadley and G.P. Rangaiah

Modeling of TABS-based thermally manageable buildings in Simulink pp. 791-800

Peizheng Ma, Lin-Shu Wang and Nianhua Guo

Qualitative and quantitative analysis of lignocellulosic biomass using infrared techniques: A mini-review pp. 801-809

Feng Xu, Jianming Yu, Tesfaye Tesso, Floyd Dowell and Donghai Wang

A hybrid multi-effect distillation and adsorption cycle pp. 810-821

Kyaw Thu, Young-Deuk Kim, Gary Amy, Won Gee Chun and Kim Choon Ng

Reliability assessment of photovoltaic power systems: Review of current status and future perspectives pp. 822-833

Peng Zhang, Wenyuan Li, Sherwin Li, Yang Wang and Weidong Xiao

An overview of data for wake model evaluation in the Virtual Wakes Laboratory pp. 834-844

R.J. Barthelmie and S.C. Pryor

Green roofs in European climates. Are effective solutions for the energy savings in air-conditioning? pp. 845-859

Fabrizio Ascione, Nicola Bianco, Filippo de’ Rossi,, Gianluca Turni and Giuseppe Peter Vanoli

Producing liquid transportation fuels from heterotrophic microalgae pp. 860-868

Yanna Liang

IGCC–EPI: Decentralized concept of a highly load-flexible IGCC power plant for excess power integration pp. 869-879

Alexander Buttler, Christian Kunze and Hartmut Spliethoff

The sclerosis of regional electricity intensities in Italy: An aggregate and sectoral analysis pp. 880-889

Andrea Vaona

Gelled graphite/gelatin composites for latent heat cold storage pp. 890-897

Nuno Vitorino, João C.C. Abrantes and Jorge Ribeiro Frade

Surface roughness effect on the metallic bipolar plates of a proton exchange membrane fuel cell pp. 898-904

Chien-Hung Lin

Improved yield of solvent free enzymatic methanolysis of palm and jatropha oils blended with castor oil pp. 905-909

Esmat Maleki, Mohamed Kheireddine Aroua and Nik Meriam Nik Sulaiman

Optimization criteria for cogeneration systems: Multi-objective approach and application in an hospital facility pp. 910-923

Alfredo Gimelli and Massimiliano Muccillo

Sustainable urban energy planning: The case study of a tropical city pp. 924-935

Henrique César Sampaio, Rubens Alves Dias and José Antônio Perrella Balestieri

Profit and policy implications of producing biodiesel–ethanol–diesel fuel blends to specification pp. 936-944

Jiefeng Lin, Gabrielle Gaustad and Thomas A. Trabold

Robust control of the PEM fuel cell air-feed system via sub-optimal second order sliding mode pp. 945-957

Imad Matraji, Salah Laghrouche, Samir Jemei and Maxime Wack

Nonlinear heat transfer processes in a two-phase thermofluidic oscillator pp. 958-977

Christos N. Markides, Adebayo Osuolale, Roochi Solanki and Guy-Bart V. Stan

A new bladeless hydraulic turbine pp. 978-983

V. Beran, M. Sedláček and F. Marˇs´ık

Optimizing solid oxide fuel cell cathode processing route for intermediate temperature operation pp. 984-991

N. Ortiz-Vitoriano, C. Bernuy-López, I. Ruiz de Larramendi, R. Knibbe, K. Thydén, A. Hauch, P. Holtappels and T. Rojo

Study on the effect of engine operation parameters on cyclic combustion variations and correlation coefficient between the pressure-related parameters of a CNG engine pp. 992-1002

H.G. Zhang, X.J. Han, B.F. Yao and G.X. Li