Applied Energy

1975 - 2025

Current editor(s): J. Yan

From Elsevier
Bibliographic data for series maintained by Catherine Liu ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

2014, volume 125, articles C

Velocity and turbulence effects on high intensity distributed combustion pp. 1-9

Ahmed E.E. Khalil and Ashwani K. Gupta

A total cost perspective on use of polymeric materials in solar collectors – Importance of environmental performance on suitability pp. 10-20

Bo Carlsson, Helena Persson, Michaela Meir and John Rekstad

Design and investigation of a novel lens-walled compound parabolic concentrator with air gap pp. 21-27

Li Guiqiang, Pei Gang, Su Yuehong, Wang Yunyun and Ji Jie

An analysis of the factors affecting hybrid ground-source heat pump installation potential in North America pp. 28-38

Hiep V. Nguyen, Ying Lam E. Law, Masih Alavy, Philip R. Walsh, Wey H. Leong and Seth B. Dworkin

Further exploring the potential of residential demand response programs in electricity distribution pp. 39-59

Cajsa Bartusch and Karin Alvehag

Main factors affecting the lifetime of Proton Exchange Membrane fuel cells in vehicle applications: A review pp. 60-75

Pucheng Pei and Huicui Chen

Optimization of dilute-phosphoric-acid steam pretreatment of Eucalyptus benthamii for biofuel production pp. 76-83

Eulogio Castro, Ismael U. Nieves, Mike T. Mullinnix, William J. Sagues, Ralph W. Hoffman, Marco T. Fernández-Sandoval, Zhuoli Tian, Donald L. Rockwood, Bijay Tamang and Lonnie O. Ingram

Uncertainty over techno-economic potentials of biogas from municipal solid waste (MSW): A case study on an industrial process pp. 84-92

Karthik Rajendran, Harshavardhan R. Kankanala, Rakel Martinsson and Mohammad J. Taherzadeh

The value of energy storage in South Korea’s electricity market: A Hotelling approach pp. 93-102

Anastasia Shcherbakova, Andrew Kleit and Joohyun Cho

Improving photovoltaics grid integration through short time forecasting and self-consumption pp. 103-113

D. Masa-Bote, M. Castillo-Cagigal, E. Matallanas, E. Caamaño-Martín, A. Gutiérrez, F. Monasterio-Huelín and J. Jiménez-Leube

Charge–discharge performance of carbon fiber-based electrodes in single cell and short stack for vanadium redox flow battery pp. 114-122

A. Di Blasi, N. Briguglio, O. Di Blasi and V. Antonucci

Home grown or imported? Biofuels life cycle GHG emissions in electricity generation and transportation pp. 123-131

Kanae Tokunaga and Denise Konan

Comments on “Pyrolysis kinetics of biomass from product information” (Applied Energy 110 (2013) 1–8) regarding the inability to obtain meaningful kinetic parameters from a single non-isothermal curve pp. 132-135

Pedro E. Sánchez-Jiménez, María del Rocío Rodríguez-Laguna, Luis A. Pérez-Maqueda and José M. Criado

A systematic process integration framework for the optimal design and techno-economic performance analysis of energy supply and CO2 mitigation strategies pp. 136-146

Jee-Hoon Han and In-Beum Lee

Shale-to-well energy use and air pollutant emissions of shale gas production in China pp. 147-157

Yuan Chang, Runze Huang, Robert J. Ries and Eric Masanet

LTA-CAES – A low-temperature approach to Adiabatic Compressed Air Energy Storage pp. 158-164

Daniel Wolf and Marcus Budt

Design of spiral coil PHC energy pile considering effective borehole thermal resistance and groundwater advection effects pp. 165-178

Gyu-Hyun Go, Seung-Rae Lee, Seok Yoon and Han-byul Kang

Process design and performance analysis of a Staged, Pressurized Oxy-Combustion (SPOC) power plant for carbon capture pp. 179-188

Akshay Gopan, Benjamin M. Kumfer, Jeffrey Phillips, David Thimsen, Richard Smith and Richard L. Axelbaum

Design of a photochemical water electrolysis system based on a W-typed dye-sensitized serial solar module for high hydrogen production pp. 189-196

Byeong Sub Kwak, Jinho Chae and Misook Kang

Long-run marginal CO2 emissions factors in national electricity systems pp. 197-205

A.D. Hawkes

A parametric study of light-duty natural gas vehicle competitiveness in the United States through 2050 pp. 206-217

Meghan B. Peterson, Garrett E. Barter, Todd H. West and Dawn K. Manley

Technical and economic assessment of offshore wind power plants based on variable frequency operation of clusters with a single power converter pp. 218-229

Mikel de Prada Gil, Oriol Gomis-Bellmunt and Andreas Sumper

Forecast value considering energy pricing in California pp. 230-237

Jennifer Luoma, Patrick Mathiesen and Jan Kleissl

Corrosion of metal and metal alloy containers in contact with phase change materials (PCM) for potential heating and cooling applications pp. 238-245

Pere Moreno, Laia Miró, Aran Solé, Camila Barreneche, Cristian Solé, Ingrid Martorell and Luisa F. Cabeza

Effect of the presence of HCl on cyclic CO2 capture of calcium-based sorbent in calcium looping process pp. 246-253

Wenjing Wang, Yingjie Li, Xin Xie and Rongyue Sun

Performance of a Solid Oxide Fuel Cell short-stack with biogas feeding pp. 254-263

D. Papurello, R. Borchiellini, P. Bareschino, V. Chiodo, S. Freni, A. Lanzini, F. Pepe, G.A. Ortigoza and M Santarelli

Role of crystal structure on CO2 capture by limestone derived CaO subjected to carbonation/recarbonation/calcination cycles at Ca-looping conditions pp. 264-275

J.M. Valverde, P.E. Sanchez-Jimenez, L.A. Perez-Maqueda, M.A.S. Quintanilla and J. Perez-Vaquero

The value of a clear, long-term climate policy agenda: A case study of China’s power sector using a multi-region optimization model pp. 276-288

Can Wang, Minhua Ye, Wenjia Cai and Jining Chen

Optimal fast charging station placing and sizing pp. 289-299

Payam Sadeghi-Barzani, Abbas Rajabi-Ghahnavieh and Hosein Kazemi-Karegar

A physics-based time-varying transport delay oxygen concentration model for dual-loop exhaust gas recirculation (EGR) engine air-paths pp. 300-307

Xiangrui Zeng and Junmin Wang

Oxy-fuel combustion in circulating fluidized bed boilers pp. 308-318

Bo Leckner and Alberto Gómez-Barea

2014, volume 124, articles C

A systematic multi-step screening of numerous salt hydrates for low temperature thermochemical energy storage pp. 1-16

N’Tsoukpoe, Kokouvi Edem, Thomas Schmidt, Holger Urs Rammelberg, Beatriz Amanda Watts and Wolfgang K.L. Ruck

Microturbogas cogeneration systems for distributed generation: Effects of ambient temperature on global performance and components’ behavior pp. 17-27

F. Caresana, L. Pelagalli, G. Comodi and M. Renzi

Methodology for the assessment of PV capacity over a city region using low-resolution LiDAR data and application to the City of Leeds (UK) pp. 28-34

David A. Jacques, James Gooding, Jannik J. Giesekam, Alison S. Tomlin and Rolf Crook

Performance, combustion and emission tests of a metro-bus running on biodiesel-ULSD blended (B20) fuel pp. 35-43

S. Bari

Cost-effectiveness of alternative powertrains for reduced energy use and CO2 emissions in passenger vehicles pp. 44-61

Justin D.K. Bishop, Niall P.D. Martin and Adam M. Boies

An optimal investment planning framework for multiple distributed generation units in industrial distribution systems pp. 62-72

Duong Quoc Hung, N. Mithulananthan and R.C. Bansal

A comprehensive experimental procedure for CO2 coal gasification: Is there really a maximum reaction rate? pp. 73-81

Arturo Gomez, Rico Silbermann and Nader Mahinpey

Bioreducer use in Finnish blast furnace ironmaking – Analysis of CO2 emission reduction potential and mitigation cost pp. 82-93

Hannu Suopajärvi, Eva Pongrácz and Timo Fabritius

GIS-driven analysis of e-mobility in urban areas: An evaluation of the impact on the electric energy grid pp. 94-116

Michele De Gennaro, Elena Paffumi, Harald Scholz and Giorgio Martini

Evaluation of on-shore wind techno-economical potential in regions and islands pp. 117-129

Julieta Schallenberg-Rodríguez and Jesús Notario-del Pino

Experimental and simulating examination of computer tools, Radlink and DOE2, for daylighting and energy simulation with venetian blinds pp. 130-139

Cheng Tian, Tingyao Chen and Tse-ming Chung

Investigation on a 1kW traveling-wave thermoacoustic electrical generator pp. 140-147

Zhanghua Wu, Limin Zhang, Wei Dai and Ercang Luo

Analyzing in-plane temperature distribution via a micro-temperature sensor in a unit polymer electrolyte membrane fuel cell pp. 148-155

H.Y. Wang, W.J. Yang and Y.B. Kim

Robust on-line fault detection diagnosis for HVAC components based on nonlinear state estimation techniques pp. 156-166

Marco Bonvini, Michael D. Sohn, Jessica Granderson, Michael Wetter and Mary Ann Piette

Working fluid selection for a two-phase thermofluidic oscillator: Effect of thermodynamic properties pp. 167-185

Christos N. Markides, Roochi Solanki and Amparo Galindo

The effects of diluent composition on the rates of HCCI and spark assisted compression ignition combustion pp. 186-198

Laura Manofsky Olesky, George A. Lavoie, Dennis N. Assanis, Margaret S. Wooldridge and Jason B. Martz

Can China realize its carbon emission reduction goal in 2020: From the perspective of thermal power development pp. 199-212

Liwei Liu, Haijing Zong, Erdong Zhao, Chuxiang Chen and Jianzhou Wang

Experimental validation of a numerical code by thin film heat flux sensors for the resolution of thermal bridges in dynamic conditions pp. 213-222

Fabrizio Ascione, Nicola Bianco, Rosa Francesca De Masi, Gerardo Maria Mauro, Marilena Musto and Giuseppe Peter Vanoli

Experimental assessment of a fully predictive CFD approach, for flow of cooling air in an electric generator pp. 223-230

Pirooz Moradnia, Valery Chernoray and Håkan Nilsson

Analysis and optimization of subcritical two-stage vapor injection heat pump systems pp. 231-240

A. Redón, E. Navarro-Peris, M. Pitarch, J. Gonzálvez-Macia and J.M. Corberán

Removal of low concentration CO2 at ambient temperature using several potassium-based sorbents pp. 241-247

Chuanwen Zhao, Yafei Guo, Changhai Li and Shouxiang Lu

Improving the supercooling degree of titanium dioxide nanofluids with sodium dodecylsulfate pp. 248-255

Lisi Jia, Lan Peng, Ying Chen, Songping Mo and Xing Li

Integration of different models in the design of chemical processes: Application to the design of a power plant pp. 256-273

José A. Caballero, Miguel A. Navarro, Rubén Ruiz-Femenia and Ignacio E. Grossmann

Utility scale energy storage and the need for flexible capacity metrics pp. 274-282

Eric Cutter, Ben Haley, Jeremy Hargreaves and Jim Williams

US shale gas production outlook based on well roll-out rate scenarios pp. 283-297

Ruud Weijermars

Optimization of a Distributed Cogeneration System with solar district heating pp. 298-308

Dario Buoro, Piero Pinamonti and Mauro Reini

On application of a new hybrid maximum power point tracking (MPPT) based photovoltaic system to the closed plant factory pp. 309-324

Joe-Air Jiang, Yu-Li Su, Jyh-Cherng Shieh, Kun-Chang Kuo, Tzu-Shiang Lin, Ta-Te Lin, Wei Fang, Jui-Jen Chou and Jen-Cheng Wang

Methods for benchmarking building energy consumption against its past or intended performance: An overview pp. 325-334

Zhengwei Li, Yanmin Han and Peng Xu

Can two-stage instead of one-stage anaerobic digestion really increase energy recovery from biomass? pp. 335-342

A. Schievano, A. Tenca, S. Lonati, E. Manzini and F. Adani

Sequenced combustion characteristics, emission and thermal efficiency in gasoline homogeneous charge induced ignition pp. 343-353

Yu Chao, Wang Zhi and Wang Jianxin

Natural gas fueled compression ignition engine performance and emissions maps with diesel and RME pilot fuels pp. 354-365

S. Imran, D.R. Emberson, A. Diez, D.S. Wen, R.J. Crookes and T. Korakianitis

Part-load particulate matter from a GDI engine and the connection with combustion characteristics pp. 366-376

F. Bonatesta, E. Chiappetta and A. La Rocca

Assessment of energy storage for transmission-constrained wind pp. 377-388

Jeremiah X. Johnson, Robert De Kleine and Gregory A. Keoleian