Applied Energy

1975 - 2025

Current editor(s): J. Yan

From Elsevier
Bibliographic data for series maintained by Catherine Liu ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

2017, volume 199, articles C

Electro-hydraulic damper for energy harvesting suspension: Modeling, prototyping and experimental validation pp. 1-12

Yuxin Zhang, Hong Chen, Konghui Guo, Xinjie Zhang and Shengbo Eben Li

Carbon neutral growth from 2020 strategy and airline environmental inefficiency: A Network Range Adjusted Environmental Data Envelopment Analysis pp. 13-24

Ye Li and Qiang Cui

Synergies and trade-offs in renewable energy landscapes: Balancing energy production with economics and ecosystem services pp. 25-44

Rebecca J. Hanes, Varsha Gopalakrishnan and Bhavik R. Bakshi

A review of salt hydrates for seasonal heat storage in domestic applications pp. 45-68

P.A.J. Donkers, L.C. Sögütoglu, H.P. Huinink, H.R. Fischer and O.C.G. Adan

Technical and economic analysis of organic flash regenerative cycles (OFRCs) for low temperature waste heat recovery pp. 69-87

A. Baccioli, M. Antonelli and U. Desideri

The shale gas revolution: Barriers, sustainability, and emerging opportunities pp. 88-95

Richard S. Middleton, Rajan Gupta, Jeffrey D. Hyman and Hari S. Viswanathan

Thermodynamic analytical solution and exergy analysis for supercritical compressed air energy storage system pp. 96-106

Huan Guo, Yujie Xu, Haisheng Chen, Cong Guo and Wei Qin

A numerical study of the impurity effects on CO2 geological storage in layered formation pp. 107-120

Didi Li, Yao He, Hongcheng Zhang, Wenbin Xu and Xi Jiang

Experimental assessment of room occupancy patterns in an office building. Comparison of different approaches based on CO2 concentrations and computer power consumption pp. 121-141

J.A. Díaz and M.J. Jiménez

Evaluating the benefits of coordinated emerging flexible resources in electricity markets pp. 142-154

E. Heydarian-Forushani, M.E.H. Golshan and Pierluigi Siano

Simulating European wind power generation applying statistical downscaling to reanalysis data pp. 155-168

I. González-Aparicio, F. Monforti, P. Volker, A. Zucker, F. Careri, T. Huld and J. Badger

Water neutrality and waste heat management in ethanol reformer - HTPEMFC integrated system for on-board hydrogen generation pp. 169-179

P. Purnima and S. Jayanti

Durable direct ethanol anode-supported solid oxide fuel cell pp. 180-186

M.C. Steil, S.D. Nobrega, S. Georges, P. Gelin, S. Uhlenbruck and F.C. Fonseca

Integrated structural optimisation of offshore wind turbine support structures based on finite element analysis and genetic algorithm pp. 187-204

Theo Gentils, Lin Wang and Athanasios Kolios

A resilient microgrid formation strategy for load restoration considering master-slave distributed generators and topology reconfiguration pp. 205-216

Tao Ding, Yanling Lin, Zhaohong Bie and Chen Chen

Stability study of a nonlinear thermoacoustic combustor: Effects of time delay, acoustic loss and combustion-flow interaction index pp. 217-224

Xinyan Li, Yong Huang, Dan Zhao, Wenming Yang, Xinglin Yang and Huabing Wen

Enhanced CO2 sorption performance of CaO/Ca3Al2O6 sorbents and its sintering-resistance mechanism pp. 225-233

Jie-ying Jing, Ting-yu Li, Xue-wei Zhang, Shi-dong Wang, Jie Feng, William A. Turmel and Wen-ying Li

Optimal operation for integrated energy system considering thermal inertia of district heating network and buildings pp. 234-246

Wei Gu, Jun Wang, Shuai Lu, Zhao Luo and Chenyu Wu

Dynamic modelling and start-up operation of a solar-assisted recompression supercritical CO2 Brayton power cycle pp. 247-263

Minh Tri Luu, Dia Milani, Robbie McNaughton and Ali Abbas

Economic evaluation of maintenance strategies for ground-mounted solar photovoltaic plants pp. 264-280

Lennart Peters and Reinhard Madlener

A comparative study on thermal performance evaluation of a new double skin façade system integrated with photovoltaic blinds pp. 281-293

Yongqiang Luo, Ling Zhang, Xiliang Wang, Lei Xie, Zhongbing Liu, Jing Wu, Yelin Zhang and Xihua He

Savings through the use of adaptive predictive control of thermo-active building systems (TABS): A case study pp. 294-309

Martin Schmelas, Thomas Feldmann and Elmar Bollin

Reduction of recycled NO over char during oxy-fuel fluidized bed combustion: Effects of operating parameters pp. 310-322

Mingxin Xu, Shiyuan Li, Yinghai Wu and Lufei Jia

Thermal transients simulations of a building by a dynamic model based on thermal-electrical analogy: Evaluation and implementation issue pp. 323-334

Giacomo Capizzi, Grazia Lo Sciuto, Giuliano Cammarata and Massimiliano Cammarata

The evolutionary route of coal matrix during integrated cascade pyrolysis of a typical low-rank coal pp. 335-346

Xiongchao Lin, Meng Luo, Shouyi Li, Yuanping Yang, Xujun Chen, Bin Tian and Yonggang Wang

Experimental investigation of a latent heat storage for solar cooling applications pp. 347-358

Valeria Palomba, Vincenza Brancato and Andrea Frazzica

Evaluation the potential and energy efficiency of dual stage pressure retarded osmosis process pp. 359-369

Ali Altaee, Guillermo Zaragoza, Enrico Drioli and John Zhou

Preferential enclathration of CO2 into tetra-n-butyl phosphonium bromide semiclathrate hydrate in moderate operating conditions: Application for CO2 capture from shale gas pp. 370-381

Zheng Li, Dong-Liang Zhong, Yi-Yu Lu, Jin Yan and Zhen-Lin Zou

Numerical study of hydrogen-air combustion characteristics in a novel micro-thermophotovoltaic power generator pp. 382-399

Alireza Alipoor and Mohammad Hassan Saidi

A novel active free piston Stirling engine: Modeling, development, and experiment pp. 400-415

A.R. Tavakolpour-Saleh, Sh. Zare and H. Bahreman

Experimental assessment of new fast MPPT algorithm for PV systems under non-uniform irradiance conditions pp. 416-429

R. Bradai, R. Boukenoui, A. Kheldoun, H. Salhi, M. Ghanes, J-P. Barbot and A. Mellit

Effect of diesel injection strategies on natural gas/diesel RCCI combustion characteristics in a light duty diesel engine pp. 430-446

Kamran Poorghasemi, Rahim Khoshbakhti Saray, Ehsan Ansari, Behrouz Khoshbakht Irdmousa, Mehdi Shahbakhti and Jeffery D. Naber

A simulation-based methodology for quantifying European passenger car fleet CO2 emissions pp. 447-465

Stefanos Tsiakmakis, Georgios Fontaras, Biagio Ciuffo and Zissis Samaras

Integrated optimisation of photovoltaic and battery storage systems for UK commercial buildings pp. 466-478

Arthur Mariaud, Salvador Acha, Ned Ekins-Daukes, Nilay Shah and Christos N. Markides

Increasing the operational capability of a horizontal axis wind turbine by its integration with a vertical axis wind turbine pp. 479-494

Bala Govind

2017, volume 198, articles C

An optimal day-ahead load scheduling approach based on the flexibility of aggregate demands pp. 1-11

X. Ayón, J.K. Gruber, B.P. Hayes, J. Usaola and M. Prodanović

A multi-period optimisation model for planning carbon sequestration retrofits in the electricity sector pp. 12-20

Jui-Yuan Lee

Integrating photovoltaics into energy systems by using a run-off-river power plant with pondage to smooth energy exchange with the power gird pp. 21-35

Jakub Jurasz and Bartłomiej Ciapała

An integrated thermal and lighting simulation tool to support the design process of complex fenestration systems for office buildings pp. 36-48

Waldo Bustamante, Daniel Uribe, Sergio Vera and Germán Molina

An integrated model for assessing electricity retailer’s profitability with demand response pp. 49-64

Athanasios S. Dagoumas and Michael Polemis

Optimal operation of coal conveying systems assembled with crushers using model predictive control methodology pp. 65-76

Shirong Zhang and Wei Mao

Dark-fermentative biohydrogen pathways and microbial networks in continuous stirred tank reactors: Novel insights on their control pp. 77-87

Rodolfo Palomo-Briones, Elías Razo-Flores, Nicolas Bernet and Eric Trably

Advances in autothermal reformer design pp. 88-98

Joachim Pasel, Remzi Can Samsun, Andreas Tschauder, Ralf Peters and Detlef Stolten

Flame downwash length evolution of non-premixed gaseous fuel jets in cross-flow: Experiments and a new correlation pp. 99-107

Fengju Shang, Longhua Hu, Xiepeng Sun, Qiang Wang and Adriana Palacios

The impact of thermal mass on building energy consumption pp. 108-121

Aidan Reilly and Oliver Kinnane

Performance-based health monitoring, diagnostics and prognostics for condition-based maintenance of gas turbines: A review pp. 122-144

Mohammadreza Tahan, Elias Tsoutsanis, Masdi Muhammad and Z.A. Abdul Karim

A stochastic optimization approach for the design of organic fluid mixtures for low-temperature heat recovery pp. 145-159

M. Magdalena Santos-Rodriguez, Antonio Flores-Tlacuahuac and Victor M. Zavala

Designing the scale of a woody biomass CHP considering local forestry reformation: A case study of Tanegashima, Japan pp. 160-172

Yuichiro Kanematsu, Kazutake Oosawa, Tatsuya Okubo and Yasunori Kikuchi

Compact and efficient generator for low grade solar and waste heat driven absorption systems pp. 173-179

Mehdi Mortazavi, Michael Schmid and Saeed Moghaddam

Coupling power generation with syngas-based chemical synthesis pp. 180-191

Clemens Forman, Matthias Gootz, Christian Wolfersdorf and Bernd Meyer

Generic characterization method for energy flexibility: Applied to structural thermal storage in residential buildings pp. 192-202

Glenn Reynders, Jan Diriken and Dirk Saelens

Research and application of a hybrid wavelet neural network model with the improved cuckoo search algorithm for electrical power system forecasting pp. 203-222

Liye Xiao, Wei Shao, Mengxia Yu, Jing Ma and Congjun Jin

Quantification and driving force analysis of provincial-level carbon emissions in China pp. 223-238

Bin Ye, JingJing Jiang, Changsheng Li, Lixin Miao and Jie Tang

Energy conservation in industrial pneumatics: A state model for predicting energetic savings using a novel pneumatic strain energy accumulator pp. 239-249

Joshua J. Cummins, Christopher J. Nash, Seth Thomas, Aaron Justice, Sankaran Mahadevan, Douglas E. Adams and Eric J. Barth

Amine-grafted mesoporous copper silicates as recyclable solid amine sorbents for post-combustion CO2 capture pp. 250-260

Yanping Ren, Ruiyu Ding, Hairong Yue, Siyang Tang, Changjun Liu, Jinbo Zhao, Wen Lin and Bin Liang

Gravity settling of planktonic bacteria to anodes enhances current production of microbial fuel cells pp. 261-266

Tian Li, Lean Zhou, Yawei Qian, Lili Wan, Qing Du, Nan Li and Xin Wang

Probabilistic optimal scheduling of networked microgrids considering time-based demand response programs under uncertainty pp. 267-279

Nima Nikmehr, Sajad Najafi-Ravadanegh and Amin Khodaei

Sustainability of cereal straws for the fermentative production of second generation biofuels: A review of the efficiency and economics of biochemical pretreatment processes pp. 284-298

Shiladitya Ghosh, Ranjana Chowdhury and Pinaki Bhattacharya

Desirability function for optimization of Dilute Acid pretreatment of sugarcane straw for ethanol production and preliminary economic analysis based in three fermentation configurations pp. 299-311

Leyanis Mesa, Yenisleidy Martínez, Edenny Barrio and Erenio González

Effect of polymer plastic binder on mechanical, storage and combustion characteristics of torrefied and pelletized herbaceous biomass pp. 312-319

Bagher Emadi, Kingsley L. Iroba and Lope G. Tabil

A numerical and experimental study on fast pyrolysis of single woody biomass particles pp. 320-331

Hamid Rezaei, Shahab Sokhansanj, Xiaotao Bi, C. Jim Lim and Anthony Lau

Experimental investigation of utilization of Soya soap stock based acid oil biodiesel in an automotive compression ignition engine pp. 332-346

Shweta Tripathi and K.A. Subramanian

Clean combustion of n-butanol as a next generation biofuel for diesel engines pp. 347-359

Xiaoye Han, Zhenyi Yang, Meiping Wang, Jimi Tjong and Ming Zheng

Impact of the biorefinery size on the logistics of corn stover supply – A scenario analysis pp. 360-376

Yu Wang, Mahmood Ebadian, Shahab Sokhansanj, Erin Webb and Anthony Lau

Supply chain model to assess the feasibility of incorporating a terminal between forests and biorefineries pp. 377-384

Shuva Gautam, Luc LeBel and Marc-André Carle

An integrated wood pellet supply chain development: Selecting among feedstock sources and a range of operating scales pp. 385-400

Tasseda Boukherroub, Luc LeBel and Sébastien Lemieux

Financial analysis and risk assessment of hydroprocessed renewable jet fuel production from camelina, carinata and used cooking oil pp. 401-409

Pei Lin Chu, Caroline Vanderghem, Heather L. MacLean and Bradley A. Saville

A financial analysis of the potential of dead trees from the boreal forest of eastern Canada to serve as feedstock for wood pellet export pp. 410-425

Julie Barrette, Evelyne Thiffault, Alexis Achim, Martin Junginger, David Pothier and Louis De Grandpré

Integrating agronomic factors into energy efficiency assessment of agro-bioenergy production – A case study of ethanol and biogas production from maize feedstock pp. 426-439

Oludunsin Tunrayo Arodudu, Katharina Helming, Alexey Voinov and Hubert Wiggering

Assessing butanol from integrated forest biorefinery: A combined techno-economic and life cycle approach pp. 440-452

Annie Levasseur, Olivier Bahn, Didier Beloin-Saint-Pierre, Mariya Marinova and Kathleen Vaillancourt